This patch series intends to do the following:
1: Add IPA support
2: Update the CAN bindings
3: Fix display node range
4: Minor tweaks for sorting the nodes
5: Use any protocol available in kernel for ip instead of dhcp
6: Cleanup CPU compatibles

This patch series is based on linux-4.19.y-cip and all the patches in this
series are cherry-picked from upstream.

Biju Das (2):
arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA
arm64: dts: renesas: r8a774c0: Add dynamic power coefficient

Eugeniu Rosca (1):
dt-bindings: can: rcar_can: document r8a77965 support

Fabrizio Castro (3):
dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM]
arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01]
arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V
regulator

Geert Uytterhoeven (1):
arm64: dts: renesas: r8a774c0: Fix register range of display node

Jacopo Mondi (1):
arm64: dts: renesas: Update 'vsps' properties for readability

Magnus Damm (1):
arm64: dts: renesas: Use ip=on for bootargs

Robin Murphy (1):
arm64: dts: renesas: r8a774c0: Clean up CPU compatibles

Yoshihiro Kaneko (2):
thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
arm64: dts: renesas: r8a774c0: cat874: Sort nodes

.../devicetree/bindings/net/can/rcar_can.txt | 9 +++--
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 39 +++++++++++++---------
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 36 +++++++++++++++-----
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 +-
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +-
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
drivers/thermal/rcar_thermal.c | 11 +++++-
9 files changed, 70 insertions(+), 35 deletions(-)

--
2.7.4