Re: [PATCH 00/14] Add Device tree support for iWave G20D-Q7 board


Chris Paterson
 

From: Biju Das [mailto:biju.das@...]
Sent: 08 August 2017 10:50

This patch series aims to add initial SoC DT/Clock and iWave G20D-Q7 DT.

The clock patch is based on the similar work done on r8a7791(R-Car M2) SoC.

This series has been tested against linux-cip tag v4.4.y-cip master branch.
For the series: Reviewed-by: Chris Paterson <chris.paterson2@...>



Biju Das (8):
ARM: dts: r8a7743: initial SoC device tree
ARM: shmobile: r8a7743: Add clock index macros for DT sources
clk: shmobile: Document r8a7743 CPG clock support
clk: shmobile: Document r8a7743 CPG DIV6 clock support
clk: shmobile: Document r8a7743 MSTP clock support
ARM: dts: r8a7743: Add clocks
ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM
ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on
RZ/G1M

Sergei Shtylyov (4):
ARM: dts: r8a7743: add SYS-DMAC support
ARM: dts: r8a7743: add [H]SCIF{A|B} support
ARM: dts: r8a7743: add Ether support
ARM: dts: r8a7743: add IRQC support

Simon Horman (2):
ARM: shmobile: defconfig: Enable r8a774[35] SoCs
ARM: multi_v7_defconfig: Enable r8a774[35] SoCs

.../bindings/clock/renesas,cpg-div6-clocks.txt | 1 +
.../bindings/clock/renesas,cpg-mstp-clocks.txt | 1 +
.../clock/renesas,rcar-gen2-cpg-clocks.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 25 +
arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 29 +
arch/arm/boot/dts/r8a7743.dtsi | 871 +++++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/configs/shmobile_defconfig | 2 +
include/dt-bindings/clock/r8a7743-clock.h | 166 ++++
10 files changed, 1099 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
create mode 100644 arch/arm/boot/dts/r8a7743-iwg20m.dtsi
create mode 100644 arch/arm/boot/dts/r8a7743.dtsi create mode 100644
include/dt-bindings/clock/r8a7743-clock.h

--
1.9.1

Join cip-dev@lists.cip-project.org to automatically receive all group messages.