[PATCH 4.4.y-cip 0/9] Add USB[2.0|3.0] support

Biju Das <biju.das.jz@...>

This patch series aims to add USB2.0/USB3.0 support for iWave
RZ/G1H platform.

All the patches in this series are cherrypicked from mainline and
it is based linux-4.4.y-cip.

Biju Das (1):
usb: host: xhci-plat: Add r8a7742 support

Lad Prabhakar (8):
dt-bindings: phy: rcar-gen2: Add r8a7742 support
ARM: dts: r8a7742: Add USB 2.0 host support
dt-bindings: usb: renesas,usbhs: Add support for r8a7742
ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes
dt-bindings: usb: usb-xhci: Document r8a7742 support
ARM: dts: r8a7742: Add XHCI support
pinctrl: sh-pfc: r8a7790: Add USB1 PWEN pin and group
ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and xHCI

.../devicetree/bindings/phy/rcar-gen2-phy.txt | 3 +-
.../devicetree/bindings/usb/renesas_usbhs.txt | 1 +
.../devicetree/bindings/usb/usb-xhci.txt | 4 +-
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 42 +++++
arch/arm/boot/dts/r8a7742.dtsi | 165 ++++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 11 +-
drivers/usb/host/xhci-plat.c | 3 +
7 files changed, 225 insertions(+), 4 deletions(-)


Join cip-dev@lists.cip-project.org to automatically receive all group messages.