[PATCH 5.10.y-cip 22/24] arm64: dts: renesas: rzg2l-smarc: Add common dtsi file


Biju Das
 

commit 726fd781195dc99cdcb60b2678694bfa5ccd1825 upstream.

RZ/{G2L,V2L} and G2LC SoC use the same carrier board, but the SoM is
different.

Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK
uses SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available
on PMOD1.

This patch adds support for handling the pin mapping differences by moving
definitions common to RZ/G2L and RZ/G2LC to a common dtsi file.

Signed-off-by: Biju Das <biju.das.jz@...>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Link: https://lore.kernel.org/r/20220203170636.7747-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
Signed-off-by: Biju Das <biju.das.jz@...>
---
.../boot/dts/renesas/r9a07g044c2-smarc.dts | 9 +-
.../boot/dts/renesas/r9a07g044l2-smarc.dts | 1 +
.../boot/dts/renesas/r9a07g054l2-smarc.dts | 1 +
.../boot/dts/renesas/rz-smarc-common.dtsi | 207 ++++++++++++++++++
arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 193 ----------------
5 files changed, 210 insertions(+), 201 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index 8d671111d973..af84fd6c8a81 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -9,12 +9,11 @@
#include "r9a07g044c2.dtsi"
#include "rzg2lc-smarc-som.dtsi"
#include "rzg2lc-smarc-pinfunction.dtsi"
-#include "rzg2l-smarc.dtsi"
+#include "rz-smarc-common.dtsi"

/ {
model = "Renesas SMARC EVK based on r9a07g044c2";
compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
-
};

&canfd {
@@ -75,12 +74,6 @@ &phyrst {
status = "disabled";
};

-&scif2 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
&spi1 {
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
index 886d38886d05..bc2af6c92ccd 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -9,6 +9,7 @@
#include "r9a07g044l2.dtsi"
#include "rzg2l-smarc-som.dtsi"
#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
#include "rzg2l-smarc.dtsi"

/ {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index 39ef55bfe0c3..49d141db53f7 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -9,6 +9,7 @@
#include "r9a07g054l2.dtsi"
#include "rzg2l-smarc-som.dtsi"
#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
#include "rzg2l-smarc.dtsi"

/ {
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
new file mode 100644
index 000000000000..588117aafaca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer cset name='Left Input Mixer L2 Switch' on
+ * amixer cset name='Right Input Mixer R2 Switch' on
+ * amixer cset name='Headphone Playback Volume' 100
+ * amixer cset name='PCM Volume' 100%
+ * amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+ aliases {
+ serial0 = &scif0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c3 = &i2c3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_mclock: audio_mclock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ snd_rzg2l: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,widgets = "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "L2", "Mic Bias",
+ "R2", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssi0>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&audio_mclock>;
+ sound-dai = <&wm8978>;
+ };
+ };
+
+ usb0_vbus_otg: regulator-usb0-vbus-otg {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB0_VBUS_OTG";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+};
+
+&audio_clk1{
+ clock-frequency = <11289600>;
+};
+
+&audio_clk2{
+ clock-frequency = <12288000>;
+};
+
+&canfd {
+ pinctrl-0 = <&can0_pins &can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ wm8978: codec@1a {
+ compatible = "wlf,wm8978";
+ #sound-dai-cells = <0>;
+ reg = <0x1a>;
+ };
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&phyrst {
+ status = "okay";
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ssi0 {
+ pinctrl-0 = <&ssi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&usb0_vbus_otg>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 78034f36156d..33ddfd18bd56 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -8,164 +8,13 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>

-/*
- * SSI-WM8978
- *
- * This command is required when Playback/Capture
- *
- * amixer cset name='Left Input Mixer L2 Switch' on
- * amixer cset name='Right Input Mixer R2 Switch' on
- * amixer cset name='Headphone Playback Volume' 100
- * amixer cset name='PCM Volume' 100%
- * amixer cset name='Input PGA Volume' 25
- *
- */
-
/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
#define PMOD1_SER0 1

/ {
aliases {
- serial0 = &scif0;
serial1 = &scif2;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c3 = &i2c3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- audio_mclock: audio_mclock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- snd_rzg2l: sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&cpu_dai>;
- simple-audio-card,frame-master = <&cpu_dai>;
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,widgets = "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "L2", "Mic Bias",
- "R2", "Mic Bias",
- "Mic Bias", "Microphone Jack";
-
- cpu_dai: simple-audio-card,cpu {
- sound-dai = <&ssi0>;
- };
-
- codec_dai: simple-audio-card,codec {
- clocks = <&audio_mclock>;
- sound-dai = <&wm8978>;
- };
- };
-
- usb0_vbus_otg: regulator-usb0-vbus-otg {
- compatible = "regulator-fixed";
-
- regulator-name = "USB0_VBUS_OTG";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vccq_sdhi1: regulator-vccq-sdhi1 {
- compatible = "regulator-gpio";
- regulator-name = "SDHI1 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-};
-
-&audio_clk1{
- clock-frequency = <11289600>;
-};
-
-&audio_clk2{
- clock-frequency = <12288000>;
-};
-
-&canfd {
- pinctrl-0 = <&can0_pins &can1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
};
-
- channel1 {
- status = "okay";
- };
-};
-
-&ehci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&hsusb {
- dr_mode = "otg";
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
- clock-frequency = <400000>;
-
- status = "okay";
-
- wm8978: codec@1a {
- compatible = "wlf,wm8978";
- #sound-dai-cells = <0>;
- reg = <0x1a>;
- };
-};
-
-&ohci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&phyrst {
- status = "okay";
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
- status = "okay";
};

/*
@@ -184,45 +33,3 @@ &scif2 {
status = "okay";
};
#endif
-
-&sdhi1 {
- pinctrl-0 = <&sdhi1_pins>;
- pinctrl-1 = <&sdhi1_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&vccq_sdhi1>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-0 = <&spi1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&ssi0 {
- pinctrl-0 = <&ssi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&usb0_vbus_otg>;
- status = "okay";
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
--
2.25.1

Join cip-dev@lists.cip-project.org to automatically receive all group messages.