Date   

cip/linux-4.19.y-cip build: 130 builds: 0 failed, 130 passed, 48 warnings (v4.19.165-cip41)

kernelci.org bot <bot@...>
 

cip/linux-4.19.y-cip build: 130 builds: 0 failed, 130 passed, 48 warnings (v4.19.165-cip41)

Full Build Summary: https://kernelci.org/build/cip/branch/linux-4.19.y-cip/kernel/v4.19.165-cip41/

Tree: cip
Branch: linux-4.19.y-cip
Git Describe: v4.19.165-cip41
Git Commit: ae1fef4b10f29edc4ab75ef9be40f334997b5646
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git
Built: 3 unique architectures

Warnings Detected:

arm64:
allmodconfig (gcc-8): 3 warnings
allnoconfig (gcc-8): 1 warning

arm:
allmodconfig (gcc-8): 3 warnings
allnoconfig (gcc-8): 1 warning
am200epdkit_defconfig (gcc-8): 1 warning
clps711x_defconfig (gcc-8): 1 warning
cm_x2xx_defconfig (gcc-8): 1 warning
colibri_pxa300_defconfig (gcc-8): 1 warning
corgi_defconfig (gcc-8): 1 warning
efm32_defconfig (gcc-8): 1 warning
eseries_pxa_defconfig (gcc-8): 1 warning
h5000_defconfig (gcc-8): 1 warning
integrator_defconfig (gcc-8): 1 warning
lpc32xx_defconfig (gcc-8): 1 warning
lpd270_defconfig (gcc-8): 1 warning
lubbock_defconfig (gcc-8): 1 warning
magician_defconfig (gcc-8): 1 warning
mainstone_defconfig (gcc-8): 1 warning
multi_v4t_defconfig (gcc-8): 1 warning
multi_v7_defconfig (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_SMP=n (gcc-8): 1 warning
palmz72_defconfig (gcc-8): 1 warning
pcm027_defconfig (gcc-8): 1 warning
prima2_defconfig (gcc-8): 1 warning
pxa168_defconfig (gcc-8): 1 warning
pxa255-idp_defconfig (gcc-8): 1 warning
pxa3xx_defconfig (gcc-8): 1 warning
pxa910_defconfig (gcc-8): 1 warning
raumfeld_defconfig (gcc-8): 1 warning
s3c2410_defconfig (gcc-8): 1 warning
s3c6400_defconfig (gcc-8): 1 warning
s5pv210_defconfig (gcc-8): 1 warning
spitz_defconfig (gcc-8): 1 warning
stm32_defconfig (gcc-8): 1 warning
sunxi_defconfig (gcc-8): 1 warning
tango4_defconfig (gcc-8): 1 warning
tct_hammer_defconfig (gcc-8): 1 warning
vf610m4_defconfig (gcc-8): 1 warning
viper_defconfig (gcc-8): 1 warning
vt8500_v6_v7_defconfig (gcc-8): 1 warning
xcep_defconfig (gcc-8): 1 warning
zeus_defconfig (gcc-8): 1 warning

x86_64:


Warnings summary:

37 drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]
6 arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])
1 drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=]
1 WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/pll.o
1 WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/gate.o
1 /tmp/ccurixzO.s:18196: Warning: using r15 results in unpredictable behaviour
1 /tmp/ccurixzO.s:18124: Warning: using r15 results in unpredictable behaviour

================================================================================

Detailed per-defconfig build reports:

--------------------------------------------------------------------------------
acs5k_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
acs5k_tiny_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
allmodconfig (arm, gcc-8) — PASS, 0 errors, 3 warnings, 0 section mismatches

Warnings:
/tmp/ccurixzO.s:18124: Warning: using r15 results in unpredictable behaviour
/tmp/ccurixzO.s:18196: Warning: using r15 results in unpredictable behaviour
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
allmodconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
allmodconfig (arm64, gcc-8) — PASS, 0 errors, 3 warnings, 0 section mismatches

Warnings:
drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=]
WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/gate.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/pll.o

--------------------------------------------------------------------------------
allnoconfig (arm64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
allnoconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
allnoconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
am200epdkit_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
aspeed_g4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
aspeed_g5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
assabet_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
at91_dt_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
axm55xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
badge4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
bcm2835_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
cerfcube_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
clps711x_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
cm_x2xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
cm_x300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
cns3420vb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
colibri_pxa270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
colibri_pxa300_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
collie_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
corgi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
davinci_all_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig+CONFIG_RANDOMIZE_BASE=y (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
dove_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ebsa110_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
efm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
em_x270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ep93xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
eseries_pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
exynos_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ezx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
footbridge_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
gemini_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
h3600_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
h5000_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
hackkit_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
hisi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imote2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imx_v4_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imx_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
integrator_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
iop13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
iop32x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
iop33x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ixp4xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
jornada720_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
keystone_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ks8695_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lpc18xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lpc32xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
lpd270_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
lubbock_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
magician_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
mainstone_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
mini2440_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mmp2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
moxart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mps2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
multi_v4t_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
multi_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
multi_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_SMP=n (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
mv78xx0_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mvebu_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mvebu_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mxs_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
neponset_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
netwinder_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
netx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nhk8815_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc910_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc950_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc960_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
omap1_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
omap2plus_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
orion5x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
oxnas_v6_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
palmz72_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pcm027_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pleb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
prima2_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa168_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa255-idp_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa910_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
qcom_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
raumfeld_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
realview_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
rpc_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
s3c2410_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
s3c6400_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
s5pv210_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
sama5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
shannon_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
shmobile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
simpad_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
socfpga_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear6xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spitz_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
stm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
sunxi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
tango4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
tct_hammer_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
tegra_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
trizeps4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
u300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
u8500_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
versatile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
vexpress_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
vf610m4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
viper_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
vt8500_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
x86_64_defconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
x86_64_defconfig+kvm_guest (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
x86_64_defconfig+x86-chromebook (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
xcep_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
zeus_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
zx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

---
For more info write to <info@kernelci.org>


Re: Cip-kernel-sec Updates for Week of 2021-01-07

Pavel Machek
 

Hi!

Three new issues this week:

- CVE-2020-36158 [mwifiex] - fixed in mainline; needs backport
This afternoon backports of this one were queued to all branches
relevant to us:

v |2ee7362d6 5c455c o: 5.10| mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start
v |69c37921f 5c455c o: 4.19| mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start
a |3a1e2e3e4 5c455c .: 4.4| mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start

...so it seems this is going to be handled without our intervention.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


cip/linux-4.19.y-cip ltp-ipc: 24 runs, 1 regressions (v4.19.163-cip40-34-g2f3a6d08a3bd)

kernelci.org bot <bot@...>
 

cip/linux-4.19.y-cip ltp-ipc: 24 runs, 1 regressions (v4.19.163-cip40-34-g2f3a6d08a3bd)

Regressions Summary
-------------------

platform | arch | lab | compiler | defconfig | regressions
-----------+------+---------------+----------+--------------------+------------
odroid-xu3 | arm | lab-collabora | gcc-8 | multi_v7_defconfig | 1

Details: https://kernelci.org/test/job/cip/branch/linux-4.19.y-cip/kernel/v4.19.163-cip40-34-g2f3a6d08a3bd/plan/ltp-ipc/

Test: ltp-ipc
Tree: cip
Branch: linux-4.19.y-cip
Describe: v4.19.163-cip40-34-g2f3a6d08a3bd
URL: https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git
SHA: 2f3a6d08a3bdbf69ef164a95911e32e37b89c0d2

Test suite revisions:
ltp-tests
URL: https://github.com/linux-test-project/ltp.git
SHA: b7ca00a6faa75fee42cb63d40f709cbfe65ec378


Test Regressions
----------------


platform | arch | lab | compiler | defconfig | regressions
-----------+------+---------------+----------+--------------------+------------
odroid-xu3 | arm | lab-collabora | gcc-8 | multi_v7_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff65e9245d887cde4c94cd1

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: multi_v7_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/multi_v7_defconfig/gcc-8/lab-collabora/ltp-ipc-odroid-xu3.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/multi_v7_defconfig/gcc-8/lab-collabora/ltp-ipc-odroid-xu3.html
Rootfs: http://storage.kernelci.org/images/rootfs/debian/buster-ltp/20201221.0/armhf/initrd.cpio.gz


* ltp-ipc.login: https://kernelci.org/test/case/id/5ff65e9245d887cde4c94cd2
new failure (last pass: v4.19.163-cip40-5-g95fea62f9f453)


Cip-kernel-sec Updates for Week of 2021-01-07

Chen-Yu Tsai (Moxa) <wens@...>
 

Hi everyone,

Three new issues this week:

- CVE-2020-35499 [bluetooth/sco] - fixed in all relevant kernels
- CVE-2020-36158 [mwifiex] - fixed in mainline; needs backport
- CVE-2021-0342 [net/tun] - fixed in all relevant kernels


Regards
ChenYu


cip/linux-4.19.y-cip baseline: 264 runs, 7 regressions (v4.19.163-cip40-34-g2f3a6d08a3bd)

kernelci.org bot <bot@...>
 

cip/linux-4.19.y-cip baseline: 264 runs, 7 regressions (v4.19.163-cip40-34-g2f3a6d08a3bd)

Regressions Summary
-------------------

platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
meson-gxl-s905x-khadas-vim | arm64 | lab-baylibre | gcc-8 | defconfig | 1
panda | arm | lab-collabora | gcc-8 | omap2plus_defconfig | 1
qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1
qemu_arm-versatilepb | arm | lab-broonie | gcc-8 | versatile_defconfig | 1
qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1
qemu_arm-versatilepb | arm | lab-collabora | gcc-8 | versatile_defconfig | 1
qemu_x86_64 | x86_64 | lab-baylibre | gcc-8 | x86_64_defcon...6-chromebook | 1

Details: https://kernelci.org/test/job/cip/branch/linux-4.19.y-cip/kernel/v4.19.163-cip40-34-g2f3a6d08a3bd/plan/baseline/

Test: baseline
Tree: cip
Branch: linux-4.19.y-cip
Describe: v4.19.163-cip40-34-g2f3a6d08a3bd
URL: https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git
SHA: 2f3a6d08a3bdbf69ef164a95911e32e37b89c0d2


Test Regressions
----------------


platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
meson-gxl-s905x-khadas-vim | arm64 | lab-baylibre | gcc-8 | defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff655a5478173e267c94cc3

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: defconfig
Compiler: gcc-8 (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm64/defconfig/gcc-8/lab-baylibre/baseline-meson-gxl-s905x-khadas-vim.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm64/defconfig/gcc-8/lab-baylibre/baseline-meson-gxl-s905x-khadas-vim.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/arm64/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff655a5478173e267c94cc4
new failure (last pass: v4.19.163-cip40-5-g95fea62f9f453)



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
panda | arm | lab-collabora | gcc-8 | omap2plus_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff6567e60643d5910c94cba

Results: 4 PASS, 1 FAIL, 0 SKIP
Full config: omap2plus_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/omap2plus_defconfig/gcc-8/lab-collabora/baseline-panda.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/omap2plus_defconfig/gcc-8/lab-collabora/baseline-panda.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/armel/baseline/rootfs.cpio.gz


* baseline.dmesg.emerg: https://kernelci.org/test/case/id/5ff6567e60643d5910c94cbf
failing since 40 days (last pass: v4.19.160-cip39, first fail: v4.19.160-cip39-1-g00b5977d73363)
2 lines

2021-01-07 00:31:51.905000+00:00 kern :emerg : lock: emif_lock+0x0/0xffffed34 [emif], .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff654d10fa6bc33d8c94cf2

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: versatile_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-baylibre/baseline-qemu_arm-versatilepb.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-baylibre/baseline-qemu_arm-versatilepb.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/armel/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff654d10fa6bc33d8c94cf3
failing since 53 days (last pass: v4.19.152-cip37-37-g18852869b06b, first fail: v4.19.157-cip38)



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
qemu_arm-versatilepb | arm | lab-broonie | gcc-8 | versatile_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff654c5763c2728b7c94d0b

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: versatile_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-broonie/baseline-qemu_arm-versatilepb.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-broonie/baseline-qemu_arm-versatilepb.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/armel/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff654c5763c2728b7c94d0c
failing since 53 days (last pass: v4.19.152-cip37-37-g18852869b06b, first fail: v4.19.157-cip38)



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff654c4763c2728b7c94d08

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: versatile_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-cip/baseline-qemu_arm-versatilepb.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-cip/baseline-qemu_arm-versatilepb.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/armel/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff654c4763c2728b7c94d09
failing since 53 days (last pass: v4.19.152-cip37-37-g18852869b06b, first fail: v4.19.157-cip38)



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
qemu_arm-versatilepb | arm | lab-collabora | gcc-8 | versatile_defconfig | 1

Details: https://kernelci.org/test/plan/id/5ff6547ee19dcd9f2fc94cd8

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: versatile_defconfig
Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-collabora/baseline-qemu_arm-versatilepb.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/arm/versatile_defconfig/gcc-8/lab-collabora/baseline-qemu_arm-versatilepb.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/armel/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff6547ee19dcd9f2fc94cd9
failing since 53 days (last pass: v4.19.152-cip37-37-g18852869b06b, first fail: v4.19.157-cip38)



platform | arch | lab | compiler | defconfig | regressions
---------------------------+--------+---------------+----------+------------------------------+------------
qemu_x86_64 | x86_64 | lab-baylibre | gcc-8 | x86_64_defcon...6-chromebook | 1

Details: https://kernelci.org/test/plan/id/5ff6558a489ffb8213c94d29

Results: 0 PASS, 1 FAIL, 0 SKIP
Full config: x86_64_defconfig+x86-chromebook
Compiler: gcc-8 (gcc (Debian 8.3.0-6) 8.3.0)
Plain log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/x86_64/x86_64_defconfig+x86-chromebook/gcc-8/lab-baylibre/baseline-qemu_x86_64.txt
HTML log: https://storage.kernelci.org//cip/linux-4.19.y-cip/v4.19.163-cip40-34-g2f3a6d08a3bd/x86_64/x86_64_defconfig+x86-chromebook/gcc-8/lab-baylibre/baseline-qemu_x86_64.html
Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-4-g97706c5d9567/x86/baseline/rootfs.cpio.gz


* baseline.login: https://kernelci.org/test/case/id/5ff6558a489ffb8213c94d2a
new failure (last pass: v4.19.163-cip40-5-g95fea62f9f453)


cip/linux-4.19.y-cip build: 130 builds: 0 failed, 130 passed, 48 warnings (v4.19.163-cip40-34-g2f3a6d08a3bd)

kernelci.org bot <bot@...>
 

cip/linux-4.19.y-cip build: 130 builds: 0 failed, 130 passed, 48 warnings (v4.19.163-cip40-34-g2f3a6d08a3bd)

Full Build Summary: https://kernelci.org/build/cip/branch/linux-4.19.y-cip/kernel/v4.19.163-cip40-34-g2f3a6d08a3bd/

Tree: cip
Branch: linux-4.19.y-cip
Git Describe: v4.19.163-cip40-34-g2f3a6d08a3bd
Git Commit: 2f3a6d08a3bdbf69ef164a95911e32e37b89c0d2
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git
Built: 3 unique architectures

Warnings Detected:

arm64:
allmodconfig (gcc-8): 3 warnings
allnoconfig (gcc-8): 1 warning

arm:
allmodconfig (gcc-8): 3 warnings
allnoconfig (gcc-8): 1 warning
am200epdkit_defconfig (gcc-8): 1 warning
clps711x_defconfig (gcc-8): 1 warning
cm_x2xx_defconfig (gcc-8): 1 warning
colibri_pxa300_defconfig (gcc-8): 1 warning
corgi_defconfig (gcc-8): 1 warning
efm32_defconfig (gcc-8): 1 warning
eseries_pxa_defconfig (gcc-8): 1 warning
h5000_defconfig (gcc-8): 1 warning
integrator_defconfig (gcc-8): 1 warning
lpc32xx_defconfig (gcc-8): 1 warning
lpd270_defconfig (gcc-8): 1 warning
lubbock_defconfig (gcc-8): 1 warning
magician_defconfig (gcc-8): 1 warning
mainstone_defconfig (gcc-8): 1 warning
multi_v4t_defconfig (gcc-8): 1 warning
multi_v7_defconfig (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (gcc-8): 1 warning
multi_v7_defconfig+CONFIG_SMP=n (gcc-8): 1 warning
palmz72_defconfig (gcc-8): 1 warning
pcm027_defconfig (gcc-8): 1 warning
prima2_defconfig (gcc-8): 1 warning
pxa168_defconfig (gcc-8): 1 warning
pxa255-idp_defconfig (gcc-8): 1 warning
pxa3xx_defconfig (gcc-8): 1 warning
pxa910_defconfig (gcc-8): 1 warning
raumfeld_defconfig (gcc-8): 1 warning
s3c2410_defconfig (gcc-8): 1 warning
s3c6400_defconfig (gcc-8): 1 warning
s5pv210_defconfig (gcc-8): 1 warning
spitz_defconfig (gcc-8): 1 warning
stm32_defconfig (gcc-8): 1 warning
sunxi_defconfig (gcc-8): 1 warning
tango4_defconfig (gcc-8): 1 warning
tct_hammer_defconfig (gcc-8): 1 warning
vf610m4_defconfig (gcc-8): 1 warning
viper_defconfig (gcc-8): 1 warning
vt8500_v6_v7_defconfig (gcc-8): 1 warning
xcep_defconfig (gcc-8): 1 warning
zeus_defconfig (gcc-8): 1 warning

x86_64:


Warnings summary:

37 drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]
6 arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])
1 drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=]
1 WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/pll.o
1 WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/gate.o
1 /tmp/ccPrK8ua.s:18196: Warning: using r15 results in unpredictable behaviour
1 /tmp/ccPrK8ua.s:18124: Warning: using r15 results in unpredictable behaviour

================================================================================

Detailed per-defconfig build reports:

--------------------------------------------------------------------------------
acs5k_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
acs5k_tiny_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
allmodconfig (arm64, gcc-8) — PASS, 0 errors, 3 warnings, 0 section mismatches

Warnings:
drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=]
WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/gate.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/pll.o

--------------------------------------------------------------------------------
allmodconfig (arm, gcc-8) — PASS, 0 errors, 3 warnings, 0 section mismatches

Warnings:
/tmp/ccPrK8ua.s:18124: Warning: using r15 results in unpredictable behaviour
/tmp/ccPrK8ua.s:18196: Warning: using r15 results in unpredictable behaviour
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
allmodconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
allnoconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
allnoconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
allnoconfig (arm64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
am200epdkit_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
aspeed_g4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
aspeed_g5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
assabet_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
at91_dt_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
axm55xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
badge4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
bcm2835_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
cerfcube_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
clps711x_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
cm_x2xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
cm_x300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
cns3420vb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
colibri_pxa270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
colibri_pxa300_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
collie_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
corgi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
davinci_all_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
defconfig+CONFIG_RANDOMIZE_BASE=y (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
dove_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ebsa110_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
efm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
em_x270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ep93xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
eseries_pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
exynos_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ezx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
footbridge_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
gemini_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
h3600_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
h5000_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
hackkit_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
hisi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imote2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imx_v4_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
imx_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
integrator_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
iop13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
iop32x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
iop33x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ixp4xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
jornada720_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
keystone_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
ks8695_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lpc18xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
lpc32xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
lpd270_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
lubbock_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
magician_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
mainstone_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
mini2440_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mmp2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
moxart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mps2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
multi_v4t_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
multi_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
multi_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
multi_v7_defconfig+CONFIG_SMP=n (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
mv78xx0_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mvebu_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mvebu_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
mxs_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
neponset_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
netwinder_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
netx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nhk8815_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc910_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc950_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
nuc960_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
omap1_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
omap2plus_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
orion5x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
oxnas_v6_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
palmz72_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pcm027_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pleb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
prima2_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa168_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa255-idp_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa910_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
qcom_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
raumfeld_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
realview_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
rpc_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
s3c2410_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
s3c6400_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
s5pv210_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
sama5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
shannon_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
shmobile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
simpad_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
socfpga_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spear6xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
spitz_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
stm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
sunxi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
arch/arm/boot/dts/sun8i-h3-beelink-x2.dtb: Warning (clocks_property): /wifi_pwrseq: Missing property '#clock-cells' in node /soc/rtc@1f00000 or bad phandle (referred from clocks[0])

--------------------------------------------------------------------------------
tango4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
tct_hammer_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
tegra_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
trizeps4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
u300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
u8500_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
versatile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
vexpress_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
vf610m4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
viper_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
vt8500_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
x86_64_defconfig (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
x86_64_defconfig+kvm_guest (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
x86_64_defconfig+x86-chromebook (x86_64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

--------------------------------------------------------------------------------
xcep_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
zeus_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches

Warnings:
drivers/clk/clk.c:49:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]

--------------------------------------------------------------------------------
zx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches

---
For more info write to <info@kernelci.org>


CIP IRC weekly meeting today

masashi.kudo@cybertrust.co.jp <masashi.kudo@...>
 

Hi all,

Kindly be reminded to attend the weekly meeting through IRC to discuss technical topics with CIP kernel today.

*Please note that the IRC meeting was rescheduled to UTC (GMT) 09:00 starting from the first week of Apr. according to TSC meeting*
https://www.timeanddate.com/worldclock/meetingdetails.html?year=2021&month=1&day=7&hour=9&min=0&sec=0&p1=224&p2=179&p3=136&p4=37&p5=241&p6=248

USWest USEast UK DE TW JP
01:00 04:00 9:00 10:00 17:00 18:00

Channel:
* irc:chat.freenode.net:6667/cip

Last meeting minutes:
https://irclogs.baserock.org/meetings/cip/2020/12/cip.2020-12-17-09.00.log.html

* Action item
1. Combine root filesystem with kselftest binary - iwamatsu
2. Do some experiment to lower burdens on CI - patersonc
3. Check hitachi_omap defconfigs wrt CVE-2020-27820 [drm/nouveau UAF] - Hitachi-team
4. Discuss an open issue (https://gitlab.com/cip-project/cip-kernel/cip-kernel-sec/-/issues/8)
- the necessity to track issues that have been retired by distros - Kernel Team
5. Decide the timing to branch 5.10 to start CIP development - Kernel Team

* Kernel maintenance updates
* Kernel testing
* CIP Security
* AOB
- next meeting

The meeting will take 30 min, although it can be extended to an hour if it makes sense and those involved in the topics can stay. Otherwise, the topic will be taken offline or in the next meeting.

Best regards,
--
M. Kudo
Cybertrust Japan Co., Ltd.


Re: [PATCH 4.19.y-cip] spi: spi-mem: Make spi_mem_default_supports_op() static inline

Pavel Machek
 

Hi!

commit b5881b153bc81d63a5a7e82a35e8a4bdbe1f8c73 upstream.

Stub helper spi_mem_default_supports_op() should
be set to static inline

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Hi Pavel,

This is a incremental patch on top of series [1], as you pointed out in
patch [2] the function should be static, this patch fixes this issue
and is backported from upstream kernel.
Thanks, applied and pushed out.

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH 4.19.y-cip] spi: spi-mem: Make spi_mem_default_supports_op() static inline

Lad Prabhakar
 

Hi Pavel,

-----Original Message-----
From: Pavel Machek <pavel@denx.de>
Sent: 06 January 2021 17:08
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
<pavel@denx.de>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH 4.19.y-cip] spi: spi-mem: Make spi_mem_default_supports_op() static inline

Hi!

This is a incremental patch on top of series [1], as you pointed out in
patch [2] the function should be static, this patch fixes this issue
and is backported from upstream kernel.
Thank you! I pushed applied and pushed the three series leading to
this ("Add Renesas RPC-IF driver", "Add missing rpc-if clock on
RZ/G2{E,M,N} SoC'", "Optimize pinctrl and add QSPI[01] pins for
RZ/G2{H,M,N,E}".)

This looks okay to me, so I'll test it and push it in few minutes.
Thank you.

Cheers,
Prabhakar

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH 4.19.y-cip] spi: spi-mem: Make spi_mem_default_supports_op() static inline

Pavel Machek
 

Hi!

This is a incremental patch on top of series [1], as you pointed out in
patch [2] the function should be static, this patch fixes this issue
and is backported from upstream kernel.
Thank you! I pushed applied and pushed the three series leading to
this ("Add Renesas RPC-IF driver", "Add missing rpc-if clock on
RZ/G2{E,M,N} SoC'", "Optimize pinctrl and add QSPI[01] pins for
RZ/G2{H,M,N,E}".)

This looks okay to me, so I'll test it and push it in few minutes.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


[PATCH 4.19.y-cip] spi: spi-mem: Make spi_mem_default_supports_op() static inline

Lad Prabhakar
 

From: YueHaibing <yuehaibing@huawei.com>

commit b5881b153bc81d63a5a7e82a35e8a4bdbe1f8c73 upstream.

Stub helper spi_mem_default_supports_op() should
be set to static inline

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Hi Pavel,

This is a incremental patch on top of series [1], as you pointed out in
patch [2] the function should be static, this patch fixes this issue
and is backported from upstream kernel.

[1] https://patchwork.kernel.org/project/cip-dev/list/?series=409359
[2] https://patchwork.kernel.org/project/cip-dev/patch/20210105135757
.11069-9-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar
---
include/linux/spi/spi-mem.h | 1 +
1 file changed, 1 insertion(+)

diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 762b3974cf9c..46497e742e7f 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -315,6 +315,7 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
{
}

+static inline
bool spi_mem_default_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
--
2.17.1


Re: [PATCH v3 4.19.y-cip 08/17] spi: spi-mem: export spi_mem_default_supports_op()

Pavel Machek
 

Hi!

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
This patch also squashes upstream commit 72e6841608b9 ("spi: spi-mem: Fix
build error without CONFIG_SPI_MEM")' in the current patch as commit
46109648052f ("spi: spi-mem: export spi_mem_default_supports_op()")'
introduced below build error when built without CONFIG_SPI_MEM:
This puts function definition directly into header file; I don't think
that will work when multiple files include it.

Adding "static inline" is the usual solution for this.
Has been done upstream by b5881b153bc8 ("spi: spi-mem: Make
spi_mem_default_supports_op() static inline")

I was once raising this concern internally that when commits are
backported not all of them are backported but since I did not know
enough about how CIP wants to do the backporting so never raised the
issue. But this is an example what I was concerned about.
We can probably create a simple script that goes through commits,
collects their "upstream" commit ids, and searches linux-next for
Fixes: xxx... So we'd have simple way of checking if we are missing
any fixes.

If Renesas could submit b5881b153bc8 ("spi: spi-mem: Make
spi_mem_default_supports_op() static inline") for 4.19-cip, it would
be nice :-).

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 08/17] spi: spi-mem: export spi_mem_default_supports_op()

Sudip Mukherjee
 

On 05/01/2021 16:51, Pavel Machek wrote:
Hi!

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
This patch also squashes upstream commit 72e6841608b9 ("spi: spi-mem: Fix
build error without CONFIG_SPI_MEM")' in the current patch as commit
46109648052f ("spi: spi-mem: export spi_mem_default_supports_op()")'
introduced below build error when built without CONFIG_SPI_MEM:
This puts function definition directly into header file; I don't think
that will work when multiple files include it.

Adding "static inline" is the usual solution for this.
Has been done upstream by b5881b153bc8 ("spi: spi-mem: Make
spi_mem_default_supports_op() static inline")

I was once raising this concern internally that when commits are
backported not all of them are backported but since I did not know
enough about how CIP wants to do the backporting so never raised the
issue. But this is an example what I was concerned about.



--
Regards
Sudip


Re: [PATCH v3 4.19.y-cip 12/17] spi: spi-mem: Compute length only when needed

Pavel Machek
 

Hi!

commit c0e035ac56680e74b27fc218c07e70f4b9b8b7a5 upstream.

When adjust_op_size is defined, len is never used. Move the len
computation where it's actually used.
index 59f7aa117a10..02cf8c3f7350 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -412,12 +412,13 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
struct spi_controller *ctlr = mem->spi->controller;
size_t len;

- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
-
if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);

if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+ len = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
if (len > spi_max_transfer_size(mem->spi))
return -EINVAL;
If we are doing this kind of cleanups... I'd move "len" declaration
inside the if, too... Not that it matters much.
Should live without this change, will drop this for now.
We can live with or without this one, I'd say.

You do not need to do anything at the moment: I believe we can simply
apply the series as-is.

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 16/17] spi: add Renesas RPC-IF driver

Lad Prabhakar
 

Hi Pavel,

Thank you for review.

-----Original Message-----
From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On Behalf Of Pavel Machek via
lists.cip-project.org
Sent: 05 January 2021 16:59
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
<pavel@denx.de>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [cip-dev] [PATCH v3 4.19.y-cip 16/17] spi: add Renesas RPC-IF driver

Hi!

+
+#ifdef CONFIG_PM_SLEEP
+static int rpcif_spi_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_suspend(ctlr);
+}
+
+static int rpcif_spi_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpcif_spi_pm_ops, rpcif_spi_suspend, rpcif_spi_resume);
+#define DEV_PM_OPS (&rpcif_spi_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver rpcif_spi_driver = {
+ .probe = rpcif_spi_probe,
+ .remove = rpcif_spi_remove,
+ .driver = {
+ .name = "rpc-if-spi",
+ .pm = DEV_PM_OPS,
+ },
+};
#ifdefs here could be reduced...
Agreed will do this change once we get the ifdef dropped in upstream.

Cheers,
Prabhakar

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 13/17] spi: spi-mem: Add a new API to support direct mapping

Lad Prabhakar
 

Hi Pavel,

Thank you for the review.

-----Original Message-----
From: Pavel Machek <pavel@denx.de>
Sent: 05 January 2021 16:58
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
<pavel@denx.de>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v3 4.19.y-cip 13/17] spi: spi-mem: Add a new API to support direct mapping

Hi!

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit aa167f3fed0c37e0e4c707d4331d827661f46644 upstream.

Most modern SPI controllers can directly map a SPI memory (or a portion
of the SPI memory) in the CPU address space. Most of the time this
brings significant performance improvements as it automates the whole
process of sending SPI memory operations every time a new region is
accessed.

This new API allows SPI memory drivers to create direct mappings and
then use them to access the memory instead of using spi_mem_exec_op().
This can be refactored to remove if/else nesting.
Agreed.

+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap) {
+ ret = spi_mem_no_dirmap_read(desc, offs, len, buf);
+ } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
This can be

if (desc->nodirmap)
return spi_mem_no_dirmap_read(desc, offs, len, buf);
if (!(ctlr->mem_ops && ctlr->mem_ops->dirmap_read))
return -ENOTSUPP;

... normal case goes here...

Same refactoring can be done for dirmap_write.

Code works either way and is not too bad, so... up to you :-).
Agreed. Do you want me to do this as part of this patch or separate patch ?

Cheers,
Prabhakar

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 12/17] spi: spi-mem: Compute length only when needed

Lad Prabhakar
 

Hi Pavel,

Thank you for the review.

-----Original Message-----
From: Pavel Machek <pavel@denx.de>
Sent: 05 January 2021 16:54
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
<pavel@denx.de>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v3 4.19.y-cip 12/17] spi: spi-mem: Compute length only when needed

Hi!

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit c0e035ac56680e74b27fc218c07e70f4b9b8b7a5 upstream.

When adjust_op_size is defined, len is never used. Move the len
computation where it's actually used.
index 59f7aa117a10..02cf8c3f7350 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -412,12 +412,13 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
struct spi_controller *ctlr = mem->spi->controller;
size_t len;

- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
-
if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);

if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+ len = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
if (len > spi_max_transfer_size(mem->spi))
return -EINVAL;
If we are doing this kind of cleanups... I'd move "len" declaration
inside the if, too... Not that it matters much.
Should live without this change, will drop this for now.

Cheers,
Prabhakar

Best regards,

Pavel

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index c3a08afb6edf..bc64b4223913 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -410,13 +410,12 @@ EXPORT_SYMBOL_GPL(spi_mem_get_name);
int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
{
struct spi_controller *ctlr = mem->spi->controller;
- size_t len;

if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);

if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
- len = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ size_t len = sizeof(op->cmd.opcode) + op->addr.nbytes +
op->dummy.nbytes;

if (len > spi_max_transfer_size(mem->spi))

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 08/17] spi: spi-mem: export spi_mem_default_supports_op()

Lad Prabhakar
 

Hi Pavel,

Thank you for the review.

-----Original Message-----
From: Pavel Machek <pavel@denx.de>
Sent: 05 January 2021 16:52
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek
<pavel@denx.de>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v3 4.19.y-cip 08/17] spi: spi-mem: export spi_mem_default_supports_op()

Hi!

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
This patch also squashes upstream commit 72e6841608b9 ("spi: spi-mem: Fix
build error without CONFIG_SPI_MEM")' in the current patch as commit
46109648052f ("spi: spi-mem: export spi_mem_default_supports_op()")'
introduced below build error when built without CONFIG_SPI_MEM:
This puts function definition directly into header file; I don't think
that will work when multiple files include it.

Adding "static inline" is the usual solution for this.
Agreed will fix this.

Cheers,
Prabhakar

Best regards,
Pavel

diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 80db2de83402..253a8d451d4c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -239,6 +243,13 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
struct sg_table *sg)
{
}
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ return false;
+}
+
#endif /* CONFIG_SPI_MEM */

int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 00/17] Add Renesas RPC-IF driver

Pavel Machek
 

Hi!

This patch series adds SPI driver for the Renesas RPC-IF.
Alongside relevant changes for spi-mem have been also backported.
This enables accessing SPI flash chip connected to RPC-IF.

The series includes just the driver changes as the DTS/i changes are
currently being upstreamed [1]. The driver has been tested on RZ/G2{EM}
with all the required dts/i changes [2].

All the patches have been cherry picked from Linux 5.11-rc2.
Thanks, series looks good. I commented on the individual patches, but
all but one are cleanup suggestions, not bugs spotted.

Tests do not show anything bad:

https://gitlab.com/cip-project/cip-kernel/linux-cip/-/pipelines/237669839

(but we don't have the driver enabled in our configs..)

I believe this can go in. I can apply it if there are no other
comments.

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Re: [PATCH v3 4.19.y-cip 16/17] spi: add Renesas RPC-IF driver

Pavel Machek
 

Hi!

+
+#ifdef CONFIG_PM_SLEEP
+static int rpcif_spi_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_suspend(ctlr);
+}
+
+static int rpcif_spi_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpcif_spi_pm_ops, rpcif_spi_suspend, rpcif_spi_resume);
+#define DEV_PM_OPS (&rpcif_spi_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver rpcif_spi_driver = {
+ .probe = rpcif_spi_probe,
+ .remove = rpcif_spi_remove,
+ .driver = {
+ .name = "rpc-if-spi",
+ .pm = DEV_PM_OPS,
+ },
+};
#ifdefs here could be reduced...

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1421 - 1440 of 7474