Add eMMC support for iW-RainboW-G22M-SM. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Simon Horman <horms+renesas@...> (cherry picked from commit

Add MMC interface support for r8a7745 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Simon Horman <horms+renesas@...> (cherry picked from commit

Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Chris Paterson <chris.paterson2@...> Acked-by: Simon Horman <horms+renesas@...> Acked-by: Rob Herring

The BSP release from iWave uses /dev/ttySC3 as debug console, this patch renames the alias accordingly for compatibility. Signed-off-by: Fabrizio Castro

From: Biju Das <biju.das@...> Define the iWave RainboW-G22D board dependent part of the Ethernet AVB device node. On some older versions of the platform (before R4.0) the phy address may

From: Biju Das <biju.das@...> Add Ethernet AVB support for r8a7745 SoC. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Simon Horman <horms+renesas@...> (cherry

From: Biju Das <biju.das@...> Add a new compatible string for the RZ/G1E (R8A7745) SoC. Signed-off-by: Biju Das <biju.das@...> Acked-by: Sergei Shtylyov

From: Simon Horman <horms+renesas@...> Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT

From: Biju Das <biju.das@...> Describe GPIO blocks in the R8A7745 device tree. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Simon Horman

From: Simon Horman <horms+renesas@...> Add fallback compatibility string for R-Car Gen 1, 2 and 3. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen

From: Biju Das <biju.das@...> Renesas RZ/G1E (R8A7745) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das

From: Biju Das <biju.das@...> Adding pinctrl support for scif4 interface. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Simon Horman

From: Sergei Shtylyov <sergei.shtylyov@...> Define the generic R8A7745 part of the PFC device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@...> Reviewed-by:

From: Biju Das <biju.das@...> Add i2c5 pin groups and function to r8a7745 PFC driver. Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Fabrizio Castro

This patch adds tpu groups and function to r8a7745/r8a7794. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das <biju.das@...> Signed-off-by: Geert

This patch adds PFC PWM[0123456] pin groups and functions, enabling PWM on the r8a7794 and r8a7745. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das

This patch adds can_clk function to r8a7745/r8a7794 which is cleaner, and allows for independent configuration. We keep the can_clk* pins definitions from within can0_groups and can1_groups for

This patch adds PFC CAN0 and CAN1 pin groups and functions, enabling CAN bus on the RZ/G1E. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das

From: Sergei Shtylyov <sergei.shtylyov@...> Renesas RZ/G1E (R8A7745) is pin compatible with R-Car E2 (R8A7794), however it doesn't have several automotive specific

From: Sergei Shtylyov <sergei.shtylyov@...> The R8A7794 PFC driver was apparently based on the preliminary revisions of the user's manual which had some signals and MOD_SEL register