Hi Koguchi-san, we have been using two commits [1][2] from the linux-cip-cyclonev branch at cip-playground to add denali support for an Arria 10 design here that uses 4.4-cip. However, it turned out

Why was this not needed upstream? Ben. -- Ben Hutchings, Software Developer   Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street

[...] [...] This and the following 9 device nodes have compatible = "renesas,r8a7743-mstp-clocks" which should presumably be "renesas,r8a7745-mstp-clocks". Ben. -- Ben Hutchings, Software

Applied, thanks. Ben. -- Ben Hutchings, Software Developer   Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street

movuzh lyp We sell E-mail databases from $10 per country. fcqads wzxndrlq rbfnka $450 for the whole WORLD. [srtzqtdh] dyeojb qqspsoap For marketing, advertising, newsletters. [wmzhqsn] hiryprmi

Hello CIP members, Recently, I have learned that vagrant disksize plugin was introduced. https://github.com/sprotheroe/vagrant-disksize This, actually, replaces two native VBox commands (example

This patch enables the HDMI interface found on the expansion board. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das <biju.das@...> Acked-by: Laurent

Add du node to r8a7745 SoC DT. Boards that want to enable the DU need to specify the output topology. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das

Add support for the R8A7745 DU (which is very similar to the R8A7794 DU); it has 2 RGB outputs. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Biju Das

Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123]. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson

From: Biju Das <biju.das@...> This patch adds DMA properties to the HSUSB node. Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Fabrizio Castro

From: Biju Das <biju.das@...> Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Simon Horman

From: Biju Das <biju.das@...> Enable HS-USB on iWave RZ/G1E carrier board. Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Fabrizio Castro

From: Biju Das <biju.das@...> Define the R8A7745 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Biju Das

From: Biju Das <biju.das@...> Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Reviewed-by: Geert Uytterhoeven

From: Biju Das <biju.das@...> Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris

From: Biju Das <biju.das@...> Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by: Biju Das

From: Biju Das <biju.das@...> Define the r8a7745 generic part of the USB PHY device node. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson

From: Biju Das <biju.das@...> Add device nodes for the r8a7745 internal PCI bridge devices. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson

Add Silicon Storage Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Andreas Färber