|
Re: [isar-cip-core] tests: put all tests into a opt layer
"Having ... as well."
Does this obsolete https://gitlab.com/cip-project/cip-core/isar-cip-core/-/merge_requests/7, where I just commented on?
Wording: It's not a testing layer, it's "test packages",
"Having ... as well."
Does this obsolete https://gitlab.com/cip-project/cip-core/isar-cip-core/-/merge_requests/7, where I just commented on?
Wording: It's not a testing layer, it's "test packages",
|
By
Jan Kiszka
·
#4955
·
|
|
Re: Kindly review for kernel config changes
Hi Kent,
Let me check if we can use the cip-kernel-config version on ISAR and remove the one in isar-cip-core.
I will also add nftables as a fragment to isar-cip-core until you tell me that it needs
Hi Kent,
Let me check if we can use the cip-kernel-config version on ISAR and remove the one in isar-cip-core.
I will also add nftables as a fragment to isar-cip-core until you tell me that it needs
|
By
Daniel Sangorrin <daniel.sangorrin@...>
·
#4954
·
|
|
Fw: [isar-cip-core] tests: put all tests into a opt layer
Hi Jan,
Sorry, I failed to put you in the Cc when I sent this patch.
There are also 3 patches from Venkata-san on the cip-dev mailing list (sent yesterday)
Apart from that there are some merge
Hi Jan,
Sorry, I failed to put you in the Cc when I sent this patch.
There are also 3 patches from Venkata-san on the cip-dev mailing list (sent yesterday)
Apart from that there are some merge
|
By
Daniel Sangorrin <daniel.sangorrin@...>
·
#4953
·
|
|
Re: [PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
Hi Pavel,
Thanks for the feedback.
Yes, Will do.
Regards,
Biju
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf,
Hi Pavel,
Thanks for the feedback.
Yes, Will do.
Regards,
Biju
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf,
|
By
Biju Das <biju.das.jz@...>
·
#4952
·
|
|
Re: [PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
Hi!
I see it is already pushed, thank you!
Biju, the first patch seems like a bugfix suitable for -stable. Can
you send it to Greg (etc) for inclusion?
Best regards,
Pavel
--
DENX
Hi!
I see it is already pushed, thank you!
Biju, the first patch seems like a bugfix suitable for -stable. Can
you send it to Greg (etc) for inclusion?
Best regards,
Pavel
--
DENX
|
By
Pavel Machek
·
#4951
·
|
|
[isar-cip-core] tests: put all tests into a opt layer
having an opt-tests layer makes it easier to see what
tests are installed, and allows creating images without
them as well
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@...>
---
having an opt-tests layer makes it easier to see what
tests are installed, and allows creating images without
them as well
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@...>
---
|
By
Daniel Sangorrin <daniel.sangorrin@...>
·
#4950
·
|
|
Re: Kindly review for kernel config changes
I see. Thank you, Daniel.
But, I'm wondering why conf/machine/qemu-amd64.conf doesn't define USE_CIP_KERNEL_CONFIG = "1".
Do you have any information for this, Dinesh or Venkata?
I think we should
I see. Thank you, Daniel.
But, I'm wondering why conf/machine/qemu-amd64.conf doesn't define USE_CIP_KERNEL_CONFIG = "1".
Do you have any information for this, Dinesh or Venkata?
I think we should
|
By
Kento Yoshida
·
#4949
·
|
|
[PATCH 3/3] README: Add steps to build cip-security image
From: venkata <venkata.pyla@...>
Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/README.md
From: venkata <venkata.pyla@...>
Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/README.md
|
By
Venkata Pyla
·
#4948
·
|
|
[PATCH 2/3] start-qemu.sh: use TARGET_IMAGE to pick respective image file
From: venkata <venkata.pyla@...>
if 'TARGET_IMAGE' variable is not set then it pick "cip-core-image",
to pick different target image set the 'TARGET_IMAGE' variable as below
e.g:
From: venkata <venkata.pyla@...>
if 'TARGET_IMAGE' variable is not set then it pick "cip-core-image",
to pick different target image set the 'TARGET_IMAGE' variable as below
e.g:
|
By
Venkata Pyla
·
#4947
·
|
|
[PATCH 1/3] cip-security: Add packages for IEC-62443-4-2 Evaluation.
From: Kazuhiro Hayashi <kazuhiro3.hayashi@...>
Identified security packages are added to the target image
and that will be used for IEC-62443-4-2 evaluation
Signed-off-by: Kazuhiro Hayashi
From: Kazuhiro Hayashi <kazuhiro3.hayashi@...>
Identified security packages are added to the target image
and that will be used for IEC-62443-4-2 evaluation
Signed-off-by: Kazuhiro Hayashi
|
By
Venkata Pyla
·
#4946
·
|
|
Re: Kindly review for kernel config changes
Hi Kent,
The configuration should go to https://gitlab.com/cip-project/cip-kernel/cip-kernel-config not isar-cip-core.
isar-cip-core and deby share cip-kernel-config configuration
Hi Kent,
The configuration should go to https://gitlab.com/cip-project/cip-kernel/cip-kernel-config not isar-cip-core.
isar-cip-core and deby share cip-kernel-config configuration
|
By
Daniel Sangorrin <daniel.sangorrin@...>
·
#4945
·
|
|
Re: [PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
Hi Pavel and Nobuhiro,
Thanks for the feedback.
Hi Pavel and Nobuhiro,
Thanks for the feedback.
|
By
Biju Das <biju.das.jz@...>
·
#4944
·
|
|
Kindly review for kernel config changes
Hi,
The security working group need to use "nftables", and it requires to add the below kernel configs to work.
Before merging to the master branch of "isar-cip-core", would you kindly review to
Hi,
The security working group need to use "nftables", and it requires to add the below kernel configs to work.
Before merging to the master branch of "isar-cip-core", would you kindly review to
|
By
Kento Yoshida
·
#4943
·
|
|
Re: [PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
Hi, all
By
Nobuhiro Iwamatsu
·
#4942
·
|
|
Re: [PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
Ok, I can apply this if there are no comments.
Should we have some updates for cip-kernel-config?
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang
Ok, I can apply this if there are no comments.
Should we have some updates for cip-kernel-config?
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang
|
By
Pavel Machek
·
#4941
·
|
|
Re: [PATCH 4.19.y-cip 1/2] ASoC: rsnd: fixup SSI clock during suspend/resume modes
Hi!
Ok, this is "interesting". It has something to do with rsnd_dai_call()
macro.
You really should not be programming drivers in preprocessor like
this.
OTOH patch is simple enough, and only
Hi!
Ok, this is "interesting". It has something to do with rsnd_dai_call()
macro.
You really should not be programming drivers in preprocessor like
this.
OTOH patch is simple enough, and only
|
By
Pavel Machek
·
#4940
·
|
|
[PATCH 4.19.y-cip 2/2] arm64: defconfig: Enable additional support for Renesas platforms
From: Geert Uytterhoeven <geert+renesas@...>
commit bf9e333ec0d54f7428d9192ad403c3cb523584c7 upstream
Increase build and test coverage by enabling support for more hardware
present on Renesas
From: Geert Uytterhoeven <geert+renesas@...>
commit bf9e333ec0d54f7428d9192ad403c3cb523584c7 upstream
Increase build and test coverage by enabling support for more hardware
present on Renesas
|
By
Biju Das <biju.das.jz@...>
·
#4939
·
|
|
[PATCH 4.19.y-cip 1/2] ASoC: rsnd: fixup SSI clock during suspend/resume modes
From: Dmytro Prokopchuk <dmytro.prokopchuk@...>
commit 624d1a7cd8991e33dad96ab4629a52c412540e65 upstream.
Prepare <-> Cleanup functions pair has balanced calls.
But in case of suspend
From: Dmytro Prokopchuk <dmytro.prokopchuk@...>
commit 624d1a7cd8991e33dad96ab4629a52c412540e65 upstream.
Prepare <-> Cleanup functions pair has balanced calls.
But in case of suspend
|
By
Biju Das <biju.das.jz@...>
·
#4938
·
|
|
Re: [PATCH 4.4.y-cip] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
Hi!
It looks good to me, and it passed basic testing -- so I applied the
patch and am pushing it. (I hope you don't mind).
Best regards,
Pavel
--
DENX Software Engineering GmbH,
Hi!
It looks good to me, and it passed basic testing -- so I applied the
patch and am pushing it. (I hope you don't mind).
Best regards,
Pavel
--
DENX Software Engineering GmbH,
|
By
Pavel Machek
·
#4937
·
|
|
Re: [PATCH 4.4.y-cip] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
Hi Pavel,
Thanks for the feedback.
Hi Pavel,
Thanks for the feedback.
|
By
Biju Das <biju.das.jz@...>
·
#4936
·
|