cip/linux-5.10.y-cip baseline-cip-nfs: 8 runs, 1 regressions (v5.10.131-cip13-24-ga6f4ea41fe167) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig

cip-gitlab/ci/pavel/linux-test baseline-nfs: 17 runs, 7 regressions (v4.4-st20-74-gc99f2b257bde3) Regressions Summary ------------------- platform | arch | lab |

cip-gitlab/ci/pavel/linux-test baseline: 60 runs, 24 regressions (v4.4-st20-74-gc99f2b257bde3) Regressions Summary ------------------- platform | arch | lab | compiler

cip-gitlab/ci/pavel/linux-test baseline-cip-nfs: 4 runs, 4 regressions (v4.4-st20-74-gc99f2b257bde3) Regressions Summary ------------------- platform | arch | lab | compiler |

cip/linux-5.10.y-cip build: 164 builds: 3 failed, 161 passed, 4 errors, 10 warnings (v5.10.131-cip13-24-ga6f4ea41fe167) Full Build Summary:

cip-gitlab/ci/pavel/linux-test build: 180 builds: 5 failed, 175 passed, 6 errors, 191 warnings (v4.4-st20-74-gc99f2b257bde3) Full Build Summary:

commit f40846e7c9f50bfbba96d566c63cbdb57b817249 upstream. On RZ/G2{L,LC} SoM module, gpio for power selection is connected to P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios

commit 061ba41c7449a9cf4bbf2b6930eb0ded69e5eead upstream. RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the carrier board. This patch adds pinmux and spi1 nodes to the carrier board

commit a081c4fe98f6662fbddb1597a6203be669641af1 upstream. Enable OSTM{1, 2} interfaces on RZ/G2LC SMARC EVK. OSTM0 is reserved for TF-A. Signed-off-by: Biju Das

commit 018d7b93477fbb04ba7b4bc4c355793d644e45da upstream. Enable mt25qu512a flash connected to QSPI0. Signed-off-by: Biju Das <biju.das.jz@...> Reviewed-by: Lad Prabhakar

commit 4eb6a6bb8ef31491c217167ecce2c0a26fd4f34e upstream. Enable Audio on RZ/G2LC SMARC EVK by deleting ssi0 entries from board DT and adding pincontrol entries to the soc-pinctrl dtsi, so that

commit 4fa1edc83b2b2b467ed47bd682c7beab81a38ef5 upstream. Enable i2c{0,1} on RZ/G2LC SMARC EVK by deleting respective entries from board dts and adding pincontrol entries to the soc-pinctrl dtsi.

commit 0a7c1c888a0c0276837f2cd7190683474a136506 upstream. On RZ/G2L SoM module, the Audio codec is connected to i2c3 bus whereas on RZ/G2LC, it is connected to i2c2 bus. So move out i2c3 and wm8978

commit a2b642d89e4beeddbfbd7be6108db2b7aaef78b6 upstream. Sort the pinctrl nodes alphabetically. Signed-off-by: Biju Das <biju.das.jz@...> Reviewed-by: Lad Prabhakar

commit 1889f4798c443dfd4993ba9bbbf4ed7bf801d94b upstream. Enable usb2.0 host/device functionality on RZ/G2LC SMARC EVK by deleting phyrst, usb2_phy{0,1}, ehci/ohci{0,1} and hsusb entries from board

From: Geert Uytterhoeven <geert+renesas@...> commit 48d8ee5b831ec8b6dbe3b4313fed0adcd752e20b upstream. Dtschema expects GPIO hogs to end with a "hog" suffix. Also, the convention for node

commit d05e409e4a66f62e863b140bd1c784f2d93f2562 upstream. Enable watchdog{0, 1, 2} interfaces on RZ/G2LC SMARC EVK. Signed-off-by: Biju Das <biju.das.jz@...> Link:

commit 5c65ad12785205d5c57bd92e19d0296f93c19e33 upstream. This patch replaces EMMC/SDHI macros with SW_SD0_DEV_SEL DIP-Switch macro for eMMC/SDHI device selection. Signed-off-by: Biju Das

commit 46da632734a5979090ef588d9da40367581fd400 upstream. On RZ/G2LC SMARC EVK, CAN0 is not populated. CAN1 is multiplexed with SCIF1 using SW1[3] or RSPI using SW1[4]. This patch adds support for

This patch series aims to add CANFD, WDT, USB2.0, AUDIO, Serial NOR Flash, OSTM and RSPI on SMARC EVK based on RZ/G2LC SoC. All these patches are cherry-picked from the mainline. Biju Das (12):