From: Biju Das <biju.das@...> Enable HS-USB on iWave RZ/G1E carrier board. Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Fabrizio Castro

From: Biju Das <biju.das@...> Define the R8A7745 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Biju Das

From: Biju Das <biju.das@...> Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Reviewed-by: Geert Uytterhoeven

From: Biju Das <biju.das@...> Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris

From: Biju Das <biju.das@...> Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by: Biju Das

From: Biju Das <biju.das@...> Define the r8a7745 generic part of the USB PHY device node. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson

From: Biju Das <biju.das@...> Add device nodes for the r8a7745 internal PCI bridge devices. Signed-off-by: Biju Das <biju.das@...> Signed-off-by: Chris Paterson

Add Silicon Storage Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Reviewed-by: Andreas Färber

Add support for the SPI NOR device used to boot up the system to the System on Module DT. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson

Add the DT node for the QSPI interface to the SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Reviewed-by: Geert

Add file r8a7745-iwg22d-sodimm-dbhd-ca.dts to provide support for iW-RainboW-G22D with HDMI daughter board plugged in. The interfaces defined in the new .dts file are: scif1, scif5, and

Add support for HSCIF1 as /dev/ttySC5, keeping the same naming scheme adopted by iWave in their BSP release. This interface uses RTS/CTS. Signed-off-by: Fabrizio Castro

Enable the SDHI0 controller on iWave RZ/G1E carrier board. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Reviewed-by:

Enable the SDHI1 controller on iWave RZ/G1E SoM. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Reviewed-by: Geert

Add the SDHI controllers to the r8a7745 device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Chris Paterson <chris.paterson2@...> Signed-off-by: Simon

Add support for the bq32000 RTC to the iwg22m device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Simon Horman <horms+renesas@...> (cherry picked from

Add iic0 and iic1 nodes to SoC dtsi. Also, define aliases i2c6 and i2c7. Board specific DT files will enable the interfaces if needed. Signed-off-by: Fabrizio Castro

Add I2C[0-5] devices to the r8a7745 device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@...> Signed-off-by: Simon Horman <horms+renesas@...> (cherry picked from commit

shmobile_defconfig builds cpu freq into the kernel by default, therefore we get error and warning messages at boot, when hotplugging cpus, and when waking up from suspend to RAM. Although the r8a7745

From: Biju Das <biju.das@...> Add the missing clock to CA7 CPU1 node. Signed-off-by: Biju Das <biju.das@...> Reviewed-by: Chris Paterson