Date   

Re: A lot of compiles failing

Pavel Machek
 

Hi!

This is going on for a few days now, but today it seems worse than
usual:

https://gitlab.com/cip-project/cip-kernel/linux-cip/-/pipelines/220169843

builds are failing, 'HTTP 500 curl 22' error, so not a real build
problem. I can probably just click restart... 6 times. But something
is not there, and it is getting worse.
Today I got new one....

Waiting for pod gitlab/runner-bcrayztp-project-2678032-concurrent-392fb6 to be running, status is Pending
217Running on runner-bcrayztp-project-2678032-concurrent-392fb6 via cip-project-v3-gitlab-runner-6dbd79945f-wdqqw...
219
Fetching changes with git depth set to 10...
00:35
220Initialized empty Git repository in /builds/cip-project/cip-kernel/linux-cip/.git/
221Created fresh repository.
222error: RPC failed; curl 92 HTTP/2 stream 0 was not closed cleanly: INTERNAL_ERROR (err 2)
223fatal: the remote end hung up unexpectedly
224fatal: early EOF
225fatal: index-pack failed
227
Uploading artifacts.

I wonder... Is each of our workers pulling full copy of kernel from
gitlab?

If so, I understand that gitlab might be a bit unhappy. We probably
should populate the initial version from our servers (or from
kernel.org), or maybe include copy of recent linux directly into
machine images... to reduce load on gitlab.

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


[PATCH v2 4.19.y-cip 7/7] spi: add Renesas RPC-IF driver

Lad Prabhakar
 

From: Sergei Shtylyov <sergei.shtylyov@...>

commit eb8d6d464a27850498dced21a8450e85d4a02009 upstream.

Add the SPI driver for the Renesas RPC-IF. It's the "front end" driver
using the "back end" APIs in the main driver to talk to the real hardware.
We only implement the 'spi-mem' interface -- there's no need to implement
the usual SPI driver methods...

Based on the original patch by Mason Yang <masonccyang@...>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@...>
Link: https://lore.kernel.org/r/1ece0e6c-71af-f0f1-709e-571f4b0b4853@cogentembedded.com
Signed-off-by: Mark Brown <broonie@...>
[PL: replaced C++ style comment with C style, used __maybe_unused for
rpcif_spi_{suspend,resume} and dropped CONFIG_PM_SLEEP ifdef checks,
elaborated the description for SPI_RPCIF config, dropped the label
err_put_ctlr from rpc_spi_probe()]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/spi/Kconfig | 8 ++
drivers/spi/Makefile | 1 +
drivers/spi/spi-rpc-if.c | 208 +++++++++++++++++++++++++++++++++++++++
3 files changed, 217 insertions(+)
create mode 100644 drivers/spi/spi-rpc-if.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0a7fd56c1ed9..dcb29af85ffc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -514,6 +514,14 @@ config SPI_RB4XX
help
SPI controller driver for the Mikrotik RB4xx series boards.

+config SPI_RPCIF
+ tristate "Renesas RPC-IF SPI driver"
+ depends on RENESAS_RPCIF
+ help
+ SPI driver for Renesas R-Car Gen3 RPC-IF (Reduced
+ Pin Count Interface). This enables access to SPI flash or
+ HyperFlash connected to the SoC.
+
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index a90d55970036..e0b5478fde62 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c
new file mode 100644
index 000000000000..7934b6042d74
--- /dev/null
+++ b/drivers/spi/spi-rpc-if.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPC-IF SPI/QSPI/Octa driver
+ *
+ * Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
+ * Copyright (C) 2019 Macronix International Co., Ltd.
+ * Copyright (C) 2019 - 2020 Cogent Embedded, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <memory/renesas-rpc-if.h>
+
+#include <asm/unaligned.h>
+
+static void rpcif_spi_mem_prepare(struct spi_device *spi_dev,
+ const struct spi_mem_op *spi_op,
+ u64 *offs, size_t *len)
+{
+ struct rpcif *rpc = spi_controller_get_devdata(spi_dev->controller);
+ struct rpcif_op rpc_op = { };
+
+ rpc_op.cmd.opcode = spi_op->cmd.opcode;
+ rpc_op.cmd.buswidth = spi_op->cmd.buswidth;
+
+ if (spi_op->addr.nbytes) {
+ rpc_op.addr.buswidth = spi_op->addr.buswidth;
+ rpc_op.addr.nbytes = spi_op->addr.nbytes;
+ rpc_op.addr.val = spi_op->addr.val;
+ }
+
+ if (spi_op->dummy.nbytes) {
+ rpc_op.dummy.buswidth = spi_op->dummy.buswidth;
+ rpc_op.dummy.ncycles = spi_op->dummy.nbytes * 8 /
+ spi_op->dummy.buswidth;
+ }
+
+ if (spi_op->data.nbytes || (offs && len)) {
+ rpc_op.data.buswidth = spi_op->data.buswidth;
+ rpc_op.data.nbytes = spi_op->data.nbytes;
+ switch (spi_op->data.dir) {
+ case SPI_MEM_DATA_IN:
+ rpc_op.data.dir = RPCIF_DATA_IN;
+ rpc_op.data.buf.in = spi_op->data.buf.in;
+ break;
+ case SPI_MEM_DATA_OUT:
+ rpc_op.data.dir = RPCIF_DATA_OUT;
+ rpc_op.data.buf.out = spi_op->data.buf.out;
+ break;
+ case SPI_MEM_NO_DATA:
+ rpc_op.data.dir = RPCIF_NO_DATA;
+ break;
+ }
+ } else {
+ rpc_op.data.dir = RPCIF_NO_DATA;
+ }
+
+ rpcif_prepare(rpc, &rpc_op, offs, len);
+}
+
+static bool rpcif_spi_mem_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (!spi_mem_default_supports_op(mem, op))
+ return false;
+
+ if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+ op->dummy.buswidth > 4 || op->cmd.buswidth > 4 ||
+ op->addr.nbytes > 4)
+ return false;
+
+ return true;
+}
+
+static ssize_t rpcif_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(desc->mem->spi->controller);
+
+ if (offs + desc->info.offset + len > U32_MAX)
+ return -EINVAL;
+
+ rpcif_spi_mem_prepare(desc->mem->spi, &desc->info.op_tmpl, &offs, &len);
+
+ return rpcif_dirmap_read(rpc, offs, len, buf);
+}
+
+static int rpcif_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(desc->mem->spi->controller);
+
+ if (desc->info.offset + desc->info.length > U32_MAX)
+ return -ENOTSUPP;
+
+ if (!rpcif_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+ return -ENOTSUPP;
+
+ if (!rpc->dirmap && desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
+ return -ENOTSUPP;
+
+ if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
+ return -ENOTSUPP;
+
+ return 0;
+}
+
+static int rpcif_spi_mem_exec_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(mem->spi->controller);
+
+ rpcif_spi_mem_prepare(mem->spi, op, NULL, NULL);
+
+ return rpcif_manual_xfer(rpc);
+}
+
+static const struct spi_controller_mem_ops rpcif_spi_mem_ops = {
+ .supports_op = rpcif_spi_mem_supports_op,
+ .exec_op = rpcif_spi_mem_exec_op,
+ .dirmap_create = rpcif_spi_mem_dirmap_create,
+ .dirmap_read = rpcif_spi_mem_dirmap_read,
+};
+
+static int rpcif_spi_probe(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct spi_controller *ctlr;
+ struct rpcif *rpc;
+ int error;
+
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+ if (!ctlr)
+ return -ENOMEM;
+
+ rpc = spi_controller_get_devdata(ctlr);
+ rpcif_sw_init(rpc, parent);
+
+ platform_set_drvdata(pdev, ctlr);
+
+ ctlr->dev.of_node = parent->of_node;
+
+ rpcif_enable_rpm(rpc);
+
+ ctlr->num_chipselect = 1;
+ ctlr->mem_ops = &rpcif_spi_mem_ops;
+
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
+ ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
+
+ rpcif_hw_init(rpc, false);
+
+ error = spi_register_controller(ctlr);
+ if (error) {
+ dev_err(&pdev->dev, "spi_register_controller failed\n");
+ rpcif_disable_rpm(rpc);
+ spi_controller_put(ctlr);
+ return error;
+ }
+
+ return 0;
+}
+
+static int rpcif_spi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr = platform_get_drvdata(pdev);
+ struct rpcif *rpc = spi_controller_get_devdata(ctlr);
+
+ spi_unregister_controller(ctlr);
+ rpcif_disable_rpm(rpc);
+
+ return 0;
+}
+
+static int __maybe_unused rpcif_spi_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_suspend(ctlr);
+}
+
+static int __maybe_unused rpcif_spi_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpcif_spi_pm_ops, rpcif_spi_suspend, rpcif_spi_resume);
+
+static struct platform_driver rpcif_spi_driver = {
+ .probe = rpcif_spi_probe,
+ .remove = rpcif_spi_remove,
+ .driver = {
+ .name = "rpc-if-spi",
+ .pm = &rpcif_spi_pm_ops,
+ },
+};
+module_platform_driver(rpcif_spi_driver);
+
+MODULE_DESCRIPTION("Renesas RPC-IF SPI driver");
+MODULE_LICENSE("GPL v2");
--
2.25.1


[PATCH v2 4.19.y-cip 6/7] spi: spi-mem: Add a new API to support direct mapping

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@...>

commit aa167f3fed0c37e0e4c707d4331d827661f46644 upstream.

Most modern SPI controllers can directly map a SPI memory (or a portion
of the SPI memory) in the CPU address space. Most of the time this
brings significant performance improvements as it automates the whole
process of sending SPI memory operations every time a new region is
accessed.

This new API allows SPI memory drivers to create direct mappings and
then use them to access the memory instead of using spi_mem_exec_op().

Signed-off-by: Boris Brezillon <boris.brezillon@...>
Reviewed-by: Miquel Raynal <miquel.raynal@...>
Signed-off-by: Mark Brown <broonie@...>
[PL: Return early in spi_mem_dirmap_dirmap_{read/write}]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/spi/spi-mem.c | 204 ++++++++++++++++++++++++++++++++++++
include/linux/spi/spi-mem.h | 80 ++++++++++++++
2 files changed, 284 insertions(+)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 2607981d973d..930a83c964c1 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -433,6 +433,210 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
}
EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);

+static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.in = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.out = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+/**
+ * spi_mem_dirmap_create() - Create a direct mapping descriptor
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * This function is creating a direct mapping descriptor which can then be used
+ * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write().
+ * If the SPI controller driver does not support direct mapping, this function
+ * fallback to an implementation using spi_mem_exec_op(), so that the caller
+ * doesn't have to bother implementing a fallback on his own.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+ struct spi_mem_dirmap_desc *desc;
+ int ret = -ENOTSUPP;
+
+ /* Make sure the number of address cycles is between 1 and 8 bytes. */
+ if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8)
+ return ERR_PTR(-EINVAL);
+
+ /* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */
+ if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA)
+ return ERR_PTR(-EINVAL);
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return ERR_PTR(-ENOMEM);
+
+ desc->mem = mem;
+ desc->info = *info;
+ if (ctlr->mem_ops && ctlr->mem_ops->dirmap_create)
+ ret = ctlr->mem_ops->dirmap_create(desc);
+
+ if (ret) {
+ desc->nodirmap = true;
+ if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+ ret = -ENOTSUPP;
+ else
+ ret = 0;
+ }
+
+ if (ret) {
+ kfree(desc);
+ return ERR_PTR(ret);
+ }
+
+ return desc;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
+
+/**
+ * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
+ * @desc: the direct mapping descriptor to destroy
+ * @info: direct mapping information
+ *
+ * This function destroys a direct mapping descriptor previously created by
+ * spi_mem_dirmap_create().
+ */
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+
+ if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy)
+ ctlr->mem_ops->dirmap_destroy(desc);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);
+
+/**
+ * spi_mem_dirmap_dirmap_read() - Read data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start reading from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: destination buffer. This buffer must be DMA-able
+ *
+ * This function reads data from a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data read from the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_read() again when that happens.
+ */
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap)
+ return spi_mem_no_dirmap_read(desc, offs, len, buf);
+
+ if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ return ret;
+ }
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
+
+/**
+ * spi_mem_dirmap_dirmap_write() - Write data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start writing from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: source buffer. This buffer must be DMA-able
+ *
+ * This function writes data to a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data written to the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_write() again when that happens.
+ */
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap)
+ return spi_mem_no_dirmap_write(desc, offs, len, buf);
+
+ if (ctlr->mem_ops && ctlr->mem_ops->dirmap_write) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_write(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ return ret;
+ }
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_write);
+
static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
{
return container_of(drv, struct spi_mem_driver, spidrv.driver);
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 253a8d451d4c..762b3974cf9c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -124,6 +124,49 @@ struct spi_mem_op {
.data = __data, \
}

+/**
+ * struct spi_mem_dirmap_info - Direct mapping information
+ * @op_tmpl: operation template that should be used by the direct mapping when
+ * the memory device is accessed
+ * @offset: absolute offset this direct mapping is pointing to
+ * @length: length in byte of this direct mapping
+ *
+ * These information are used by the controller specific implementation to know
+ * the portion of memory that is directly mapped and the spi_mem_op that should
+ * be used to access the device.
+ * A direct mapping is only valid for one direction (read or write) and this
+ * direction is directly encoded in the ->op_tmpl.data.dir field.
+ */
+struct spi_mem_dirmap_info {
+ struct spi_mem_op op_tmpl;
+ u64 offset;
+ u64 length;
+};
+
+/**
+ * struct spi_mem_dirmap_desc - Direct mapping descriptor
+ * @mem: the SPI memory device this direct mapping is attached to
+ * @info: information passed at direct mapping creation time
+ * @nodirmap: set to 1 if the SPI controller does not implement
+ * ->mem_ops->dirmap_create() or when this function returned an
+ * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}()
+ * calls will use spi_mem_exec_op() to access the memory. This is a
+ * degraded mode that allows spi_mem drivers to use the same code
+ * no matter whether the controller supports direct mapping or not
+ * @priv: field pointing to controller specific data
+ *
+ * Common part of a direct mapping descriptor. This object is created by
+ * spi_mem_dirmap_create() and controller implementation of ->create_dirmap()
+ * can create/attach direct mapping resources to the descriptor in the ->priv
+ * field.
+ */
+struct spi_mem_dirmap_desc {
+ struct spi_mem *mem;
+ struct spi_mem_dirmap_info info;
+ unsigned int nodirmap;
+ void *priv;
+};
+
/**
* struct spi_mem - describes a SPI memory device
* @spi: the underlying SPI device
@@ -179,10 +222,32 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
* Note that if the implementation of this function allocates memory
* dynamically, then it should do so with devm_xxx(), as we don't
* have a ->free_name() function.
+ * @dirmap_create: create a direct mapping descriptor that can later be used to
+ * access the memory device. This method is optional
+ * @dirmap_destroy: destroy a memory descriptor previous created by
+ * ->dirmap_create()
+ * @dirmap_read: read data from the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_read() is responsible for calling it again in
+ * this case.
+ * @dirmap_write: write data to the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_write() is responsible for calling it again in
+ * this case.
*
* This interface should be implemented by SPI controllers providing an
* high-level interface to execute SPI memory operation, which is usually the
* case for QSPI controllers.
+ *
+ * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct
+ * mapping from the CPU because doing that can stall the CPU waiting for the
+ * SPI mem transaction to finish, and this will make real-time maintainers
+ * unhappy and might make your system less reactive. Instead, drivers should
+ * use DMA to access this direct mapping.
*/
struct spi_controller_mem_ops {
int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op);
@@ -191,6 +256,12 @@ struct spi_controller_mem_ops {
int (*exec_op)(struct spi_mem *mem,
const struct spi_mem_op *op);
const char *(*get_name)(struct spi_mem *mem);
+ int (*dirmap_create)(struct spi_mem_dirmap_desc *desc);
+ void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc);
+ ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
};

/**
@@ -262,6 +333,15 @@ int spi_mem_exec_op(struct spi_mem *mem,

const char *spi_mem_get_name(struct spi_mem *mem);

+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info);
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc);
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
+
int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
struct module *owner);

--
2.25.1


[PATCH v2 4.19.y-cip 5/7] spi: spi-mem: Split spi_mem_exec_op() code

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@...>

commit f86c24f4795303e4024bc113196de32782f6ccb5 upstream.

The logic surrounding the ->exec_op() call applies to direct mapping
accessors. Move this code to separate functions to avoid duplicating
code.

Signed-off-by: Boris Brezillon <boris.brezillon@...>
Reviewed-by: Miquel Raynal <miquel.raynal@...>
Signed-off-by: Mark Brown <broonie@...>
[PL: Fixed reference leak in spi_mem_access_start for PM]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/spi/spi-mem.c | 64 +++++++++++++++++++++++++++++--------------
1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index b319a9f0138c..2607981d973d 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -213,6 +213,45 @@ bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
}
EXPORT_SYMBOL_GPL(spi_mem_supports_op);

+static int spi_mem_access_start(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ /*
+ * Flush the message queue before executing our SPI memory
+ * operation to prevent preemption of regular SPI transfers.
+ */
+ spi_flush_queue(ctlr);
+
+ if (ctlr->auto_runtime_pm) {
+ int ret;
+
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ pm_runtime_put_noidle(ctlr->dev.parent);
+ dev_err(&ctlr->dev, "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ mutex_lock(&ctlr->bus_lock_mutex);
+ mutex_lock(&ctlr->io_mutex);
+
+ return 0;
+}
+
+static void spi_mem_access_end(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ mutex_unlock(&ctlr->io_mutex);
+ mutex_unlock(&ctlr->bus_lock_mutex);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+}
+
/**
* spi_mem_exec_op() - Execute a memory operation
* @mem: the SPI memory
@@ -242,30 +281,13 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
return -ENOTSUPP;

if (ctlr->mem_ops) {
- /*
- * Flush the message queue before executing our SPI memory
- * operation to prevent preemption of regular SPI transfers.
- */
- spi_flush_queue(ctlr);
-
- if (ctlr->auto_runtime_pm) {
- ret = pm_runtime_get_sync(ctlr->dev.parent);
- if (ret < 0) {
- dev_err(&ctlr->dev,
- "Failed to power device: %d\n",
- ret);
- return ret;
- }
- }
+ ret = spi_mem_access_start(mem);
+ if (ret)
+ return ret;

- mutex_lock(&ctlr->bus_lock_mutex);
- mutex_lock(&ctlr->io_mutex);
ret = ctlr->mem_ops->exec_op(mem, op);
- mutex_unlock(&ctlr->io_mutex);
- mutex_unlock(&ctlr->bus_lock_mutex);

- if (ctlr->auto_runtime_pm)
- pm_runtime_put(ctlr->dev.parent);
+ spi_mem_access_end(mem);

/*
* Some controllers only optimize specific paths (typically the
--
2.25.1


[PATCH v2 4.19.y-cip 3/7] spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@...>

commit 0ebb261a0b2d090de618a383d2378d4a00834958 upstream.

When defining spi_mem_op templates we don't necessarily know the size
that will be passed when the template is actually used, and basing the
supports_op() check on op->data.nbytes to know whether there will be
data transferred for a specific operation is this not possible.

Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum so that we can base
our checks on op->data.dir instead of op->data.nbytes.

Signed-off-by: Boris Brezillon <boris.brezillon@...>
Reviewed-by: Miquel Raynal <miquel.raynal@...>
Signed-off-by: Mark Brown <broonie@...>
[PL: manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/spi/spi-mem.c | 2 +-
include/linux/spi/spi-mem.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 62a7b80801d2..967f581bca4f 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -142,7 +142,7 @@ static bool spi_mem_default_supports_op(struct spi_mem *mem,
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;

- if (op->data.nbytes &&
+ if (op->data.dir != SPI_MEM_NO_DATA &&
spi_check_buswidth_req(mem, op->data.buswidth,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 69ee30456864..80db2de83402 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -57,10 +57,12 @@
/**
* enum spi_mem_data_dir - describes the direction of a SPI memory data
* transfer from the controller perspective
+ * @SPI_MEM_NO_DATA: no data transferred
* @SPI_MEM_DATA_IN: data coming from the SPI memory
* @SPI_MEM_DATA_OUT: data sent the SPI memory
*/
enum spi_mem_data_dir {
+ SPI_MEM_NO_DATA,
SPI_MEM_DATA_IN,
SPI_MEM_DATA_OUT,
};
--
2.25.1


[PATCH v2 4.19.y-cip 4/7] spi: spi-mem: export spi_mem_default_supports_op()

Lad Prabhakar
 

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@...>

commit 46109648052fe778c75f199d72255c899578d6f7 upstream.

Export spi_mem_default_supports_op(), so that controller drivers
can use this.
spi-mem driver already exports this using EXPORT_SYMBOL,
but not declared it in spi-mem.h.
This patch declares spi_mem_default_supports_op() in spi-mem.h and
also removes the static from the function prototype.

This patch also squashes upstream commit 72e6841608b9 ("spi: spi-mem: Fix
build error without CONFIG_SPI_MEM")' in the current patch as commit
46109648052f ("spi: spi-mem: export spi_mem_default_supports_op()")'
introduced below build error when built without CONFIG_SPI_MEM:

drivers/spi/spi-zynq-qspi.o: In function `zynq_qspi_supports_op':
spi-zynq-qspi.c:(.text+0x1da): undefined reference to `spi_mem_default_supports_op'

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@...>
Signed-off-by: Mark Brown <broonie@...>
Signed-off-by: YueHaibing <yuehaibing@...>
Signed-off-by: Mark Brown <broonie@...>
[PL: manually applied the changes, squashed commit 72e6841608b9
("spi: spi-mem: Fix build error without CONFIG_SPI_MEM")' in current patch]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/spi/spi-mem.c | 4 ++--
include/linux/spi/spi-mem.h | 11 +++++++++++
2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 967f581bca4f..b319a9f0138c 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -128,8 +128,8 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
return -ENOTSUPP;
}

-static bool spi_mem_default_supports_op(struct spi_mem *mem,
- const struct spi_mem_op *op)
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
{
if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
return false;
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 80db2de83402..253a8d451d4c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -224,6 +224,10 @@ int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
const struct spi_mem_op *op,
struct sg_table *sg);
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op);
+
#else
static inline int
spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
@@ -239,6 +243,13 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
struct sg_table *sg)
{
}
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ return false;
+}
+
#endif /* CONFIG_SPI_MEM */

int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
--
2.25.1


[PATCH v2 4.19.y-cip 2/7] memory: add Renesas RPC-IF driver

Lad Prabhakar
 

From: Sergei Shtylyov <sergei.shtylyov@...>

commit ca7d8b980b67f133317525c4273e144116ee1ae5 upstream.

Add the memory driver for Renesas RPC-IF which registers either SPI or
HyperFLash device depending on the contents of the device tree subnode.
It also provides the abstract "back end" device APIs that can be used by
the "front end" SPI/MTD drivers to talk to the real hardware.

Based on the original patch by Mason Yang <masonccyang@...>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@...>
Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com
Signed-off-by: Mark Brown <broonie@...>
[PL: manually applied change to Makefile, fixed reference leak for OF node
in rpcif_probe(), fixed overwriting return value in error path of
rpcif_manual_xfer(), replaced C++ style comment with C style, replaced tab
with a space between struct and struct name, fixed a typo in commit message]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
drivers/memory/Kconfig | 9 +
drivers/memory/Makefile | 1 +
drivers/memory/renesas-rpc-if.c | 606 ++++++++++++++++++++++++++++++++
include/memory/renesas-rpc-if.h | 87 +++++
4 files changed, 703 insertions(+)
create mode 100644 drivers/memory/renesas-rpc-if.c
create mode 100644 include/memory/renesas-rpc-if.h

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 63389f075f1d..eeb776f3db34 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -145,6 +145,15 @@ config DA8XX_DDRCTL
Texas Instruments da8xx SoCs. It's used to tweak various memory
controller configuration options.

+config RENESAS_RPCIF
+ tristate "Renesas RPC-IF driver"
+ depends on ARCH_RENESAS
+ select REGMAP_MMIO
+ help
+ This supports Renesas R-Car Gen3 RPC-IF which provides either SPI
+ host or HyperFlash. You'll have to select individual components
+ under the corresponding menu.
+
source "drivers/memory/samsung/Kconfig"
source "drivers/memory/tegra/Kconfig"

diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index a01ab3e22f94..735c0e5d30da 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
obj-$(CONFIG_MTK_SMI) += mtk-smi.o
obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o
+obj-$(CONFIG_RENESAS_RPCIF) += renesas-rpc-if.o

obj-$(CONFIG_SAMSUNG_MC) += samsung/
obj-$(CONFIG_TEGRA_MC) += tegra/
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
new file mode 100644
index 000000000000..85782b213d96
--- /dev/null
+++ b/drivers/memory/renesas-rpc-if.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RPC-IF core driver
+ *
+ * Copyright (C) 2018-2019 Renesas Solutions Corp.
+ * Copyright (C) 2019 Macronix International Co., Ltd.
+ * Copyright (C) 2019-2020 Cogent Embedded, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <memory/renesas-rpc-if.h>
+
+#define RPCIF_CMNCR 0x0000 /* R/W */
+#define RPCIF_CMNCR_MD BIT(31)
+#define RPCIF_CMNCR_SFDE BIT(24) /* undocumented but must be set */
+#define RPCIF_CMNCR_MOIIO3(val) (((val) & 0x3) << 22)
+#define RPCIF_CMNCR_MOIIO2(val) (((val) & 0x3) << 20)
+#define RPCIF_CMNCR_MOIIO1(val) (((val) & 0x3) << 18)
+#define RPCIF_CMNCR_MOIIO0(val) (((val) & 0x3) << 16)
+#define RPCIF_CMNCR_MOIIO_HIZ (RPCIF_CMNCR_MOIIO0(3) | \
+ RPCIF_CMNCR_MOIIO1(3) | \
+ RPCIF_CMNCR_MOIIO2(3) | RPCIF_CMNCR_MOIIO3(3))
+#define RPCIF_CMNCR_IO3FV(val) (((val) & 0x3) << 14) /* undocumented */
+#define RPCIF_CMNCR_IO2FV(val) (((val) & 0x3) << 12) /* undocumented */
+#define RPCIF_CMNCR_IO0FV(val) (((val) & 0x3) << 8)
+#define RPCIF_CMNCR_IOFV_HIZ (RPCIF_CMNCR_IO0FV(3) | RPCIF_CMNCR_IO2FV(3) | \
+ RPCIF_CMNCR_IO3FV(3))
+#define RPCIF_CMNCR_BSZ(val) (((val) & 0x3) << 0)
+
+#define RPCIF_SSLDR 0x0004 /* R/W */
+#define RPCIF_SSLDR_SPNDL(d) (((d) & 0x7) << 16)
+#define RPCIF_SSLDR_SLNDL(d) (((d) & 0x7) << 8)
+#define RPCIF_SSLDR_SCKDL(d) (((d) & 0x7) << 0)
+
+#define RPCIF_DRCR 0x000C /* R/W */
+#define RPCIF_DRCR_SSLN BIT(24)
+#define RPCIF_DRCR_RBURST(v) ((((v) - 1) & 0x1F) << 16)
+#define RPCIF_DRCR_RCF BIT(9)
+#define RPCIF_DRCR_RBE BIT(8)
+#define RPCIF_DRCR_SSLE BIT(0)
+
+#define RPCIF_DRCMR 0x0010 /* R/W */
+#define RPCIF_DRCMR_CMD(c) (((c) & 0xFF) << 16)
+#define RPCIF_DRCMR_OCMD(c) (((c) & 0xFF) << 0)
+
+#define RPCIF_DREAR 0x0014 /* R/W */
+#define RPCIF_DREAR_EAV(c) (((c) & 0xF) << 16)
+#define RPCIF_DREAR_EAC(c) (((c) & 0x7) << 0)
+
+#define RPCIF_DROPR 0x0018 /* R/W */
+
+#define RPCIF_DRENR 0x001C /* R/W */
+#define RPCIF_DRENR_CDB(o) (u32)((((o) & 0x3) << 30))
+#define RPCIF_DRENR_OCDB(o) (((o) & 0x3) << 28)
+#define RPCIF_DRENR_ADB(o) (((o) & 0x3) << 24)
+#define RPCIF_DRENR_OPDB(o) (((o) & 0x3) << 20)
+#define RPCIF_DRENR_DRDB(o) (((o) & 0x3) << 16)
+#define RPCIF_DRENR_DME BIT(15)
+#define RPCIF_DRENR_CDE BIT(14)
+#define RPCIF_DRENR_OCDE BIT(12)
+#define RPCIF_DRENR_ADE(v) (((v) & 0xF) << 8)
+#define RPCIF_DRENR_OPDE(v) (((v) & 0xF) << 4)
+
+#define RPCIF_SMCR 0x0020 /* R/W */
+#define RPCIF_SMCR_SSLKP BIT(8)
+#define RPCIF_SMCR_SPIRE BIT(2)
+#define RPCIF_SMCR_SPIWE BIT(1)
+#define RPCIF_SMCR_SPIE BIT(0)
+
+#define RPCIF_SMCMR 0x0024 /* R/W */
+#define RPCIF_SMCMR_CMD(c) (((c) & 0xFF) << 16)
+#define RPCIF_SMCMR_OCMD(c) (((c) & 0xFF) << 0)
+
+#define RPCIF_SMADR 0x0028 /* R/W */
+
+#define RPCIF_SMOPR 0x002C /* R/W */
+#define RPCIF_SMOPR_OPD3(o) (((o) & 0xFF) << 24)
+#define RPCIF_SMOPR_OPD2(o) (((o) & 0xFF) << 16)
+#define RPCIF_SMOPR_OPD1(o) (((o) & 0xFF) << 8)
+#define RPCIF_SMOPR_OPD0(o) (((o) & 0xFF) << 0)
+
+#define RPCIF_SMENR 0x0030 /* R/W */
+#define RPCIF_SMENR_CDB(o) (((o) & 0x3) << 30)
+#define RPCIF_SMENR_OCDB(o) (((o) & 0x3) << 28)
+#define RPCIF_SMENR_ADB(o) (((o) & 0x3) << 24)
+#define RPCIF_SMENR_OPDB(o) (((o) & 0x3) << 20)
+#define RPCIF_SMENR_SPIDB(o) (((o) & 0x3) << 16)
+#define RPCIF_SMENR_DME BIT(15)
+#define RPCIF_SMENR_CDE BIT(14)
+#define RPCIF_SMENR_OCDE BIT(12)
+#define RPCIF_SMENR_ADE(v) (((v) & 0xF) << 8)
+#define RPCIF_SMENR_OPDE(v) (((v) & 0xF) << 4)
+#define RPCIF_SMENR_SPIDE(v) (((v) & 0xF) << 0)
+
+#define RPCIF_SMRDR0 0x0038 /* R */
+#define RPCIF_SMRDR1 0x003C /* R */
+#define RPCIF_SMWDR0 0x0040 /* W */
+#define RPCIF_SMWDR1 0x0044 /* W */
+
+#define RPCIF_CMNSR 0x0048 /* R */
+#define RPCIF_CMNSR_SSLF BIT(1)
+#define RPCIF_CMNSR_TEND BIT(0)
+
+#define RPCIF_DRDMCR 0x0058 /* R/W */
+#define RPCIF_DMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0)
+
+#define RPCIF_DRDRENR 0x005C /* R/W */
+#define RPCIF_DRDRENR_HYPE(v) (((v) & 0x7) << 12)
+#define RPCIF_DRDRENR_ADDRE BIT(8)
+#define RPCIF_DRDRENR_OPDRE BIT(4)
+#define RPCIF_DRDRENR_DRDRE BIT(0)
+
+#define RPCIF_SMDMCR 0x0060 /* R/W */
+#define RPCIF_SMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0)
+
+#define RPCIF_SMDRENR 0x0064 /* R/W */
+#define RPCIF_SMDRENR_HYPE(v) (((v) & 0x7) << 12)
+#define RPCIF_SMDRENR_ADDRE BIT(8)
+#define RPCIF_SMDRENR_OPDRE BIT(4)
+#define RPCIF_SMDRENR_SPIDRE BIT(0)
+
+#define RPCIF_PHYCNT 0x007C /* R/W */
+#define RPCIF_PHYCNT_CAL BIT(31)
+#define RPCIF_PHYCNT_OCTA(v) (((v) & 0x3) << 22)
+#define RPCIF_PHYCNT_EXDS BIT(21)
+#define RPCIF_PHYCNT_OCT BIT(20)
+#define RPCIF_PHYCNT_DDRCAL BIT(19)
+#define RPCIF_PHYCNT_HS BIT(18)
+#define RPCIF_PHYCNT_STRTIM(v) (((v) & 0x7) << 15)
+#define RPCIF_PHYCNT_WBUF2 BIT(4)
+#define RPCIF_PHYCNT_WBUF BIT(2)
+#define RPCIF_PHYCNT_PHYMEM(v) (((v) & 0x3) << 0)
+
+#define RPCIF_PHYOFFSET1 0x0080 /* R/W */
+#define RPCIF_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
+
+#define RPCIF_PHYOFFSET2 0x0084 /* R/W */
+#define RPCIF_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
+
+#define RPCIF_PHYINT 0x0088 /* R/W */
+#define RPCIF_PHYINT_WPVAL BIT(1)
+
+#define RPCIF_DIRMAP_SIZE 0x4000000
+
+static const struct regmap_range rpcif_volatile_ranges[] = {
+ regmap_reg_range(RPCIF_SMRDR0, RPCIF_SMRDR1),
+ regmap_reg_range(RPCIF_SMWDR0, RPCIF_SMWDR1),
+ regmap_reg_range(RPCIF_CMNSR, RPCIF_CMNSR),
+};
+
+static const struct regmap_access_table rpcif_volatile_table = {
+ .yes_ranges = rpcif_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges),
+};
+
+static const struct regmap_config rpcif_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+ .max_register = RPCIF_PHYINT,
+ .volatile_table = &rpcif_volatile_table,
+};
+
+int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ void __iomem *base;
+
+ rpc->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &rpcif_regmap_config);
+ if (IS_ERR(rpc->regmap)) {
+ dev_err(&pdev->dev,
+ "failed to init regmap for rpcif, error %ld\n",
+ PTR_ERR(rpc->regmap));
+ return PTR_ERR(rpc->regmap);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
+ rpc->size = resource_size(res);
+ rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpc->dirmap))
+ rpc->dirmap = NULL;
+
+ rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rpc->rstc))
+ return PTR_ERR(rpc->rstc);
+
+ return 0;
+}
+EXPORT_SYMBOL(rpcif_sw_init);
+
+void rpcif_enable_rpm(struct rpcif *rpc)
+{
+ pm_runtime_enable(rpc->dev);
+}
+EXPORT_SYMBOL(rpcif_enable_rpm);
+
+void rpcif_disable_rpm(struct rpcif *rpc)
+{
+ pm_runtime_put_sync(rpc->dev);
+}
+EXPORT_SYMBOL(rpcif_disable_rpm);
+
+void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
+{
+ u32 dummy;
+
+ pm_runtime_get_sync(rpc->dev);
+
+ /*
+ * NOTE: The 0x260 are undocumented bits, but they must be set.
+ * RPCIF_PHYCNT_STRTIM is strobe timing adjustment bits,
+ * 0x0 : the delay is biggest,
+ * 0x1 : the delay is 2nd biggest,
+ * On H3 ES1.x, the value should be 0, while on others,
+ * the value should be 7.
+ */
+ regmap_write(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_STRTIM(7) |
+ RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260);
+
+ /*
+ * NOTE: The 0x1511144 are undocumented bits, but they must be set
+ * for RPCIF_PHYOFFSET1.
+ * The 0x31 are undocumented bits, but they must be set
+ * for RPCIF_PHYOFFSET2.
+ */
+ regmap_write(rpc->regmap, RPCIF_PHYOFFSET1, 0x1511144 |
+ RPCIF_PHYOFFSET1_DDRTMG(3));
+ regmap_write(rpc->regmap, RPCIF_PHYOFFSET2, 0x31 |
+ RPCIF_PHYOFFSET2_OCTTMG(4));
+
+ if (hyperflash)
+ regmap_update_bits(rpc->regmap, RPCIF_PHYINT,
+ RPCIF_PHYINT_WPVAL, 0);
+
+ regmap_write(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_SFDE |
+ RPCIF_CMNCR_MOIIO_HIZ | RPCIF_CMNCR_IOFV_HIZ |
+ RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
+ /* Set RCF after BSZ update */
+ regmap_write(rpc->regmap, RPCIF_DRCR, RPCIF_DRCR_RCF);
+ /* Dummy read according to spec */
+ regmap_read(rpc->regmap, RPCIF_DRCR, &dummy);
+ regmap_write(rpc->regmap, RPCIF_SSLDR, RPCIF_SSLDR_SPNDL(7) |
+ RPCIF_SSLDR_SLNDL(7) | RPCIF_SSLDR_SCKDL(7));
+
+ pm_runtime_put(rpc->dev);
+
+ rpc->bus_size = hyperflash ? 2 : 1;
+}
+EXPORT_SYMBOL(rpcif_hw_init);
+
+static int wait_msg_xfer_end(struct rpcif *rpc)
+{
+ u32 sts;
+
+ return regmap_read_poll_timeout(rpc->regmap, RPCIF_CMNSR, sts,
+ sts & RPCIF_CMNSR_TEND, 0,
+ USEC_PER_SEC);
+}
+
+static u8 rpcif_bits_set(struct rpcif *rpc, u32 nbytes)
+{
+ if (rpc->bus_size == 2)
+ nbytes /= 2;
+ nbytes = clamp(nbytes, 1U, 4U);
+ return GENMASK(3, 4 - nbytes);
+}
+
+static u8 rpcif_bit_size(u8 buswidth)
+{
+ return buswidth > 4 ? 2 : ilog2(buswidth);
+}
+
+void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
+ size_t *len)
+{
+ rpc->smcr = 0;
+ rpc->smadr = 0;
+ rpc->enable = 0;
+ rpc->command = 0;
+ rpc->option = 0;
+ rpc->dummy = 0;
+ rpc->ddr = 0;
+ rpc->xferlen = 0;
+
+ if (op->cmd.buswidth) {
+ rpc->enable = RPCIF_SMENR_CDE |
+ RPCIF_SMENR_CDB(rpcif_bit_size(op->cmd.buswidth));
+ rpc->command = RPCIF_SMCMR_CMD(op->cmd.opcode);
+ if (op->cmd.ddr)
+ rpc->ddr = RPCIF_SMDRENR_HYPE(0x5);
+ }
+ if (op->ocmd.buswidth) {
+ rpc->enable |= RPCIF_SMENR_OCDE |
+ RPCIF_SMENR_OCDB(rpcif_bit_size(op->ocmd.buswidth));
+ rpc->command |= RPCIF_SMCMR_OCMD(op->ocmd.opcode);
+ }
+
+ if (op->addr.buswidth) {
+ rpc->enable |=
+ RPCIF_SMENR_ADB(rpcif_bit_size(op->addr.buswidth));
+ if (op->addr.nbytes == 4)
+ rpc->enable |= RPCIF_SMENR_ADE(0xF);
+ else
+ rpc->enable |= RPCIF_SMENR_ADE(GENMASK(
+ 2, 3 - op->addr.nbytes));
+ if (op->addr.ddr)
+ rpc->ddr |= RPCIF_SMDRENR_ADDRE;
+
+ if (offs && len)
+ rpc->smadr = *offs;
+ else
+ rpc->smadr = op->addr.val;
+ }
+
+ if (op->dummy.buswidth) {
+ rpc->enable |= RPCIF_SMENR_DME;
+ rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles /
+ op->dummy.buswidth);
+ }
+
+ if (op->option.buswidth) {
+ rpc->enable |= RPCIF_SMENR_OPDE(
+ rpcif_bits_set(rpc, op->option.nbytes)) |
+ RPCIF_SMENR_OPDB(rpcif_bit_size(op->option.buswidth));
+ if (op->option.ddr)
+ rpc->ddr |= RPCIF_SMDRENR_OPDRE;
+ rpc->option = op->option.val;
+ }
+
+ rpc->dir = op->data.dir;
+ if (op->data.buswidth) {
+ u32 nbytes;
+
+ rpc->buffer = op->data.buf.in;
+ switch (op->data.dir) {
+ case RPCIF_DATA_IN:
+ rpc->smcr = RPCIF_SMCR_SPIRE;
+ break;
+ case RPCIF_DATA_OUT:
+ rpc->smcr = RPCIF_SMCR_SPIWE;
+ break;
+ default:
+ break;
+ }
+ if (op->data.ddr)
+ rpc->ddr |= RPCIF_SMDRENR_SPIDRE;
+
+ if (offs && len)
+ nbytes = *len;
+ else
+ nbytes = op->data.nbytes;
+ rpc->xferlen = nbytes;
+
+ rpc->enable |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)) |
+ RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth));
+ }
+}
+EXPORT_SYMBOL(rpcif_prepare);
+
+int rpcif_manual_xfer(struct rpcif *rpc)
+{
+ u32 smenr, smcr, pos = 0, max = 4;
+ int ret = 0;
+
+ if (rpc->bus_size == 2)
+ max = 8;
+
+ pm_runtime_get_sync(rpc->dev);
+
+ regmap_update_bits(rpc->regmap, RPCIF_PHYCNT,
+ RPCIF_PHYCNT_CAL, RPCIF_PHYCNT_CAL);
+ regmap_update_bits(rpc->regmap, RPCIF_CMNCR,
+ RPCIF_CMNCR_MD, RPCIF_CMNCR_MD);
+ regmap_write(rpc->regmap, RPCIF_SMCMR, rpc->command);
+ regmap_write(rpc->regmap, RPCIF_SMOPR, rpc->option);
+ regmap_write(rpc->regmap, RPCIF_SMDMCR, rpc->dummy);
+ regmap_write(rpc->regmap, RPCIF_SMDRENR, rpc->ddr);
+ smenr = rpc->enable;
+
+ switch (rpc->dir) {
+ case RPCIF_DATA_OUT:
+ while (pos < rpc->xferlen) {
+ u32 nbytes = rpc->xferlen - pos;
+ u32 data[2];
+
+ smcr = rpc->smcr | RPCIF_SMCR_SPIE;
+ if (nbytes > max) {
+ nbytes = max;
+ smcr |= RPCIF_SMCR_SSLKP;
+ }
+
+ memcpy(data, rpc->buffer + pos, nbytes);
+ if (nbytes > 4) {
+ regmap_write(rpc->regmap, RPCIF_SMWDR1,
+ data[0]);
+ regmap_write(rpc->regmap, RPCIF_SMWDR0,
+ data[1]);
+ } else if (nbytes > 2) {
+ regmap_write(rpc->regmap, RPCIF_SMWDR0,
+ data[0]);
+ } else {
+ regmap_write(rpc->regmap, RPCIF_SMWDR0,
+ data[0] << 16);
+ }
+
+ regmap_write(rpc->regmap, RPCIF_SMADR,
+ rpc->smadr + pos);
+ regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
+ regmap_write(rpc->regmap, RPCIF_SMCR, smcr);
+ ret = wait_msg_xfer_end(rpc);
+ if (ret)
+ goto err_out;
+
+ pos += nbytes;
+ smenr = rpc->enable &
+ ~RPCIF_SMENR_CDE & ~RPCIF_SMENR_ADE(0xF);
+ }
+ break;
+ case RPCIF_DATA_IN:
+ /*
+ * RPC-IF spoils the data for the commands without an address
+ * phase (like RDID) in the manual mode, so we'll have to work
+ * around this issue by using the external address space read
+ * mode instead.
+ */
+ if (!(smenr & RPCIF_SMENR_ADE(0xF)) && rpc->dirmap) {
+ u32 dummy;
+
+ regmap_update_bits(rpc->regmap, RPCIF_CMNCR,
+ RPCIF_CMNCR_MD, 0);
+ regmap_write(rpc->regmap, RPCIF_DRCR,
+ RPCIF_DRCR_RBURST(32) | RPCIF_DRCR_RBE);
+ regmap_write(rpc->regmap, RPCIF_DRCMR, rpc->command);
+ regmap_write(rpc->regmap, RPCIF_DREAR,
+ RPCIF_DREAR_EAC(1));
+ regmap_write(rpc->regmap, RPCIF_DROPR, rpc->option);
+ regmap_write(rpc->regmap, RPCIF_DRENR,
+ smenr & ~RPCIF_SMENR_SPIDE(0xF));
+ regmap_write(rpc->regmap, RPCIF_DRDMCR, rpc->dummy);
+ regmap_write(rpc->regmap, RPCIF_DRDRENR, rpc->ddr);
+ memcpy_fromio(rpc->buffer, rpc->dirmap, rpc->xferlen);
+ regmap_write(rpc->regmap, RPCIF_DRCR, RPCIF_DRCR_RCF);
+ /* Dummy read according to spec */
+ regmap_read(rpc->regmap, RPCIF_DRCR, &dummy);
+ break;
+ }
+ while (pos < rpc->xferlen) {
+ u32 nbytes = rpc->xferlen - pos;
+ u32 data[2];
+
+ if (nbytes > max)
+ nbytes = max;
+
+ regmap_write(rpc->regmap, RPCIF_SMADR,
+ rpc->smadr + pos);
+ regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
+ regmap_write(rpc->regmap, RPCIF_SMCR,
+ rpc->smcr | RPCIF_SMCR_SPIE);
+ ret = wait_msg_xfer_end(rpc);
+ if (ret)
+ goto err_out;
+
+ if (nbytes > 4) {
+ regmap_read(rpc->regmap, RPCIF_SMRDR1,
+ &data[0]);
+ regmap_read(rpc->regmap, RPCIF_SMRDR0,
+ &data[1]);
+ } else if (nbytes > 2) {
+ regmap_read(rpc->regmap, RPCIF_SMRDR0,
+ &data[0]);
+ } else {
+ regmap_read(rpc->regmap, RPCIF_SMRDR0,
+ &data[0]);
+ data[0] >>= 16;
+ }
+ memcpy(rpc->buffer + pos, data, nbytes);
+
+ pos += nbytes;
+ }
+ break;
+ default:
+ regmap_write(rpc->regmap, RPCIF_SMENR, rpc->enable);
+ regmap_write(rpc->regmap, RPCIF_SMCR,
+ rpc->smcr | RPCIF_SMCR_SPIE);
+ ret = wait_msg_xfer_end(rpc);
+ if (ret)
+ goto err_out;
+ }
+
+exit:
+ pm_runtime_put(rpc->dev);
+ return ret;
+
+err_out:
+ if (reset_control_reset(rpc->rstc))
+ dev_err(rpc->dev, "Failed to reset HW\n");
+ rpcif_hw_init(rpc, rpc->bus_size == 2);
+ goto exit;
+}
+EXPORT_SYMBOL(rpcif_manual_xfer);
+
+ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf)
+{
+ loff_t from = offs & (RPCIF_DIRMAP_SIZE - 1);
+ size_t size = RPCIF_DIRMAP_SIZE - from;
+
+ if (len > size)
+ len = size;
+
+ pm_runtime_get_sync(rpc->dev);
+
+ regmap_update_bits(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_MD, 0);
+ regmap_write(rpc->regmap, RPCIF_DRCR, 0);
+ regmap_write(rpc->regmap, RPCIF_DRCMR, rpc->command);
+ regmap_write(rpc->regmap, RPCIF_DREAR,
+ RPCIF_DREAR_EAV(offs >> 25) | RPCIF_DREAR_EAC(1));
+ regmap_write(rpc->regmap, RPCIF_DROPR, rpc->option);
+ regmap_write(rpc->regmap, RPCIF_DRENR,
+ rpc->enable & ~RPCIF_SMENR_SPIDE(0xF));
+ regmap_write(rpc->regmap, RPCIF_DRDMCR, rpc->dummy);
+ regmap_write(rpc->regmap, RPCIF_DRDRENR, rpc->ddr);
+
+ memcpy_fromio(buf, rpc->dirmap + from, len);
+
+ pm_runtime_put(rpc->dev);
+
+ return len;
+}
+EXPORT_SYMBOL(rpcif_dirmap_read);
+
+static int rpcif_probe(struct platform_device *pdev)
+{
+ struct platform_device *vdev;
+ struct device_node *flash;
+ const char *name;
+
+ flash = of_get_next_child(pdev->dev.of_node, NULL);
+ if (!flash) {
+ dev_warn(&pdev->dev, "no flash node found\n");
+ return -ENODEV;
+ }
+
+ if (of_device_is_compatible(flash, "jedec,spi-nor")) {
+ name = "rpc-if-spi";
+ } else if (of_device_is_compatible(flash, "cfi-flash")) {
+ name = "rpc-if-hyperflash";
+ } else {
+ of_node_put(flash);
+ dev_warn(&pdev->dev, "unknown flash type\n");
+ return -ENODEV;
+ }
+ of_node_put(flash);
+
+ vdev = platform_device_alloc(name, pdev->id);
+ if (!vdev)
+ return -ENOMEM;
+ vdev->dev.parent = &pdev->dev;
+ platform_set_drvdata(pdev, vdev);
+ return platform_device_add(vdev);
+}
+
+static int rpcif_remove(struct platform_device *pdev)
+{
+ struct platform_device *vdev = platform_get_drvdata(pdev);
+
+ platform_device_unregister(vdev);
+
+ return 0;
+}
+
+static const struct of_device_id rpcif_of_match[] = {
+ { .compatible = "renesas,rcar-gen3-rpc-if", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rpcif_of_match);
+
+static struct platform_driver rpcif_driver = {
+ .probe = rpcif_probe,
+ .remove = rpcif_remove,
+ .driver = {
+ .name = "rpc-if",
+ .of_match_table = rpcif_of_match,
+ },
+};
+module_platform_driver(rpcif_driver);
+
+MODULE_DESCRIPTION("Renesas RPC-IF core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
new file mode 100644
index 000000000000..f3cfcc3af55b
--- /dev/null
+++ b/include/memory/renesas-rpc-if.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Renesas RPC-IF core driver
+ *
+ * Copyright (C) 2018~2019 Renesas Solutions Corp.
+ * Copyright (C) 2019 Macronix International Co., Ltd.
+ * Copyright (C) 2019-2020 Cogent Embedded, Inc.
+ */
+
+#ifndef __RENESAS_RPC_IF_H
+#define __RENESAS_RPC_IF_H
+
+#include <linux/types.h>
+
+enum rpcif_data_dir {
+ RPCIF_NO_DATA,
+ RPCIF_DATA_IN,
+ RPCIF_DATA_OUT,
+};
+
+struct rpcif_op {
+ struct {
+ u8 buswidth;
+ u8 opcode;
+ bool ddr;
+ } cmd, ocmd;
+
+ struct {
+ u8 nbytes;
+ u8 buswidth;
+ bool ddr;
+ u64 val;
+ } addr;
+
+ struct {
+ u8 ncycles;
+ u8 buswidth;
+ } dummy;
+
+ struct {
+ u8 nbytes;
+ u8 buswidth;
+ bool ddr;
+ u32 val;
+ } option;
+
+ struct {
+ u8 buswidth;
+ unsigned int nbytes;
+ enum rpcif_data_dir dir;
+ bool ddr;
+ union {
+ void *in;
+ const void *out;
+ } buf;
+ } data;
+};
+
+struct rpcif {
+ struct device *dev;
+ void __iomem *dirmap;
+ struct regmap *regmap;
+ struct reset_control *rstc;
+ size_t size;
+ enum rpcif_data_dir dir;
+ u8 bus_size;
+ void *buffer;
+ u32 xferlen;
+ u32 smcr;
+ u32 smadr;
+ u32 command; /* DRCMR or SMCMR */
+ u32 option; /* DROPR or SMOPR */
+ u32 enable; /* DRENR or SMENR */
+ u32 dummy; /* DRDMCR or SMDMCR */
+ u32 ddr; /* DRDRENR or SMDRENR */
+};
+
+int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
+void rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
+void rpcif_enable_rpm(struct rpcif *rpc);
+void rpcif_disable_rpm(struct rpcif *rpc);
+void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
+ size_t *len);
+int rpcif_manual_xfer(struct rpcif *rpc);
+ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf);
+
+#endif /* __RENESAS_RPC_IF_H */
--
2.25.1


[PATCH v2 4.19.y-cip 1/7] dt-bindings: memory: document Renesas RPC-IF bindings

Lad Prabhakar
 

From: Sergei Shtylyov <sergei.shtylyov@...>

commit ab1c362061d92556bd96fd2c0b188f8e4223e3e3 upstream.

Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
HyperFlash connected to the SoC to be accessed via the external address
space read mode or the manual mode.

Document the device tree bindings for the Renesas RPC-IF found in the R-Car
gen3 SoCs.

Based on the original patch by Mason Yang <masonccyang@...>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@...>
Link: https://lore.kernel.org/r/54a84c75-fa17-9976-d9a6-a69ef67c418b@cogentembedded.com
Signed-off-by: Mark Brown <broonie@...>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
---
.../memory-controllers/renesas,rpc-if.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml

diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
new file mode 100644
index 000000000000..660005601a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+ - Sergei Shtylyov <sergei.shtylyov@...>
+
+description: |
+ Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+ be accessed via the external address space read mode or the manual mode.
+
+ The flash chip itself should be represented by a subnode of the RPC-IF node.
+ The flash interface is selected based on the "compatible" property of this
+ subnode:
+ - if it contains "jedec,spi-nor", then SPI is used;
+ - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a77970-rpc-if # R-Car V3M
+ - renesas,r8a77980-rpc-if # R-Car V3H
+ - renesas,r8a77995-rpc-if # R-Car D3
+ - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+ reg:
+ items:
+ - description: RPC-IF registers
+ - description: direct mapping read mode area
+ - description: write buffer area
+
+ reg-names:
+ items:
+ - const: regs
+ - const: dirmap
+ - const: wbuf
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ "flash@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - cfi-flash
+ - jedec,spi-nor
+
+examples:
+ - |
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ #include <dt-bindings/power/r8a77995-sysc.h>
+
+ spi@ee200000 {
+ compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+ reg = <0xee200000 0x200>,
+ <0x08000000 0x4000000>,
+ <0xee208000 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+ };
--
2.25.1


[PATCH v2 4.19.y-cip 0/7] Add RPC-IF driver for RZ/G2x SoC's

Lad Prabhakar
 

Hi Nobuhiro, Pavel,

This patch series adds SPI driver for the Renesas RPC-IF.
Alongside relevant changes for spi-mem have been also
backported. This enables accessing SPI flash chip connected
to RPC-IF on RZ/G2x boards.

We currently only aim to backport just the driver hence there
are no changes to dts/i files. The driver has been tested on
RZ/G2{EM} with all the required dts/i changes [1].

Currently we are upstreaming clock [2] and pinctrl [3] changes
required for RPC-IF interface on RZ/G2x SoC's once that hits
v5.11 we shall backport it.

All the patches have been cherry picked from Linux 5.10-rc5.

[1] https://github.com/prabhakarlad/cip/commits/master
[2] https://patchwork.kernel.org/project/linux-renesas-soc/
list/?series=365697&archive=both&state=*
[3] https://patchwork.kernel.org/project/linux-renesas-soc/
list/?series=387535&archive=both&state=*

Changes for v2:
* Patches {1, 3, 4}/7 unchanged
* Patch 2/7
* Fixed reference leak for OF node in rpcif_probe()
* Fixed overwriting return value in error path of rpcif_manual_xfer()
* Replaced C++ style comment with C style
* Replaced tab with a space between struct and struct name
* Fixed a typo in commit message (s/absract/abstract)
* Patch 5/7
* Fixed reference leak in spi_mem_access_start for PM
* Patch 6/7
* Return early in spi_mem_dirmap_dirmap_{read/write}
* Patch 7/7
* Replaced C++ style comment with C style
* Used __maybe_unused for rpcif_spi_{suspend,resume} and dropped
CONFIG_PM_SLEEP ifdef checks
* Elaborated the description for SPI_RPCIF config
* Dropped the label err_put_ctlr from rpc_spi_probe()

Cheers,
Prabhakar

Boris Brezillon (3):
spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum
spi: spi-mem: Split spi_mem_exec_op() code
spi: spi-mem: Add a new API to support direct mapping

Naga Sureshkumar Relli (1):
spi: spi-mem: export spi_mem_default_supports_op()

Sergei Shtylyov (3):
dt-bindings: memory: document Renesas RPC-IF bindings
memory: add Renesas RPC-IF driver
spi: add Renesas RPC-IF driver

.../memory-controllers/renesas,rpc-if.yaml | 88 +++
drivers/memory/Kconfig | 9 +
drivers/memory/Makefile | 1 +
drivers/memory/renesas-rpc-if.c | 606 ++++++++++++++++++
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-mem.c | 274 +++++++-
drivers/spi/spi-rpc-if.c | 208 ++++++
include/linux/spi/spi-mem.h | 93 +++
include/memory/renesas-rpc-if.h | 87 +++
10 files changed, 1351 insertions(+), 24 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
create mode 100644 drivers/memory/renesas-rpc-if.c
create mode 100644 drivers/spi/spi-rpc-if.c
create mode 100644 include/memory/renesas-rpc-if.h

--
2.25.1


Re: [PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a7742

Pavel Machek
 

Hi!

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit d16d538ff49145b153976bd8e124116d369db266 upstream.

Add support for r8a7742. The Renesas RZ/G1H (R8A7742) PCIe controller
is identical to the R-Car Gen2 family.

Sure, we can apply this (I assume it is for 4.4)? But it will not
really add any support, it just documents the binding... so I assume
this should go into series with patches that actually change the dts
(and probably tweak the drivers)?

Best regards,
Pavel

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index bedfdc122543..8a3d8b5be515 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,7 +1,8 @@
* Renesas R-Car PCIe interface

Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC;
+ "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
--
2.17.1
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


[PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a7742

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit d16d538ff49145b153976bd8e124116d369db266 upstream.

Add support for r8a7742. The Renesas RZ/G1H (R8A7742) PCIe controller
is identical to the R-Car Gen2 family.

Link: https://lore.kernel.org/r/20200810174156.30880-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Chris Paterson <Chris.Paterson2@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...>
Acked-by: Rob Herring <robh@...>
Signed-off-by: Biju Das <biju.das.jz@...>
---
Documentation/devicetree/bindings/pci/rcar-pci.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index bedfdc122543..8a3d8b5be515 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,7 +1,8 @@
* Renesas R-Car PCIe interface

Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC;
+ "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
--
2.17.1


[PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a7742

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit d16d538ff49145b153976bd8e124116d369db266 upstream.

Add support for r8a7742. The Renesas RZ/G1H (R8A7742) PCIe controller
is identical to the R-Car Gen2 family.

Link: https://lore.kernel.org/r/20200810174156.30880-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Chris Paterson <Chris.Paterson2@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...>
Acked-by: Rob Herring <robh@...>
Signed-off-by: Biju Das <biju.das.jz@...>
---
Documentation/devicetree/bindings/pci/rcar-pci.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index bedfdc122543..8a3d8b5be515 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,7 +1,8 @@
* Renesas R-Car PCIe interface

Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC;
+ "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
--
2.17.1


[PATCH 4.4.y-cip 9/9] ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and xHCI

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit eb302bb9c7ab9bbf8358b97b5f8b1c363af48239 upstream.

Enable support for HSUSB, USB2.0 and xHCI on iWave RZ/G1H carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Reviewed-by: Biju Das <biju.das.jz@...>
Link: https://lore.kernel.org/r/1595005225-11519-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
[biju: sorted the nodes as per mainline]
Signed-off-by: Biju Das <biju.das.jz@...>
---
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 42 +++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 4adcf97ae7c4..958edef2004c 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -150,6 +150,12 @@
};
};

+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&msiof0 {
pinctrl-0 = <&msiof0_pins>;
pinctrl-names = "default";
@@ -176,6 +182,24 @@
};
};

+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ /* Disable hsusb to enable USB2.0 host mode support on J2 */
+ /* status = "okay"; */
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pci2 {
+ /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
+ /* status = "okay"; */
+};
+
&pcie_bus_clk {
clock-frequency = <100000000>;
};
@@ -224,6 +248,16 @@
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
function = "ssi";
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1_pwen";
+ function = "usb1";
+ };
};

&rcar_sound {
@@ -268,3 +302,11 @@
&ssi4 {
shared-pin;
};
+
+&usbphy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
--
2.17.1


[PATCH 4.4.y-cip 8/9] pinctrl: sh-pfc: r8a7790: Add USB1 PWEN pin and group

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit 417e24986935f6bd6afa38010cc981cf4d7a7bef upstream.

Add USB1 PWEN pin and group for USB1 interface.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Biju Das <biju.das.jz@...>
Link: https://lore.kernel.org/r/1595005225-11519-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
[biju: updated pin group common index]
Signed-off-by: Biju Das <biju.das.jz@...>
---
drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
index d87f9dbbb302..f85bd1623d46 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
@@ -3710,6 +3710,13 @@ static const unsigned int usb1_pins[] = {
static const unsigned int usb1_mux[] = {
USB1_PWEN_MARK, USB1_OVC_MARK,
};
+static const unsigned int usb1_pwen_pins[] = {
+ /* PWEN */
+ RCAR_GP_PIN(5, 20),
+};
+static const unsigned int usb1_pwen_mux[] = {
+ USB1_PWEN_MARK,
+};
/* - USB2 ------------------------------------------------------------------- */
static const unsigned int usb2_pins[] = {
/* PWEN, OVC */
@@ -4038,7 +4045,7 @@ static const unsigned int vin3_clk_mux[] = {
};

static const struct {
- struct sh_pfc_pin_group common[297];
+ struct sh_pfc_pin_group common[298];
struct sh_pfc_pin_group automotive[1];
} pinmux_groups = {
.common = {
@@ -4300,6 +4307,7 @@ static const struct {
SH_PFC_PIN_GROUP(usb0),
SH_PFC_PIN_GROUP(usb0_ovc_vbus),
SH_PFC_PIN_GROUP(usb1),
+ SH_PFC_PIN_GROUP(usb1_pwen),
SH_PFC_PIN_GROUP(usb2),
VIN_DATA_PIN_GROUP(vin0_data, 24),
VIN_DATA_PIN_GROUP(vin0_data, 20),
@@ -4764,6 +4772,7 @@ static const char * const usb0_groups[] = {

static const char * const usb1_groups[] = {
"usb1",
+ "usb1_pwen",
};

static const char * const usb2_groups[] = {
--
2.17.1


[PATCH 4.4.y-cip 7/9] ARM: dts: r8a7742: Add XHCI support

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit ab586be87ed2cc94701b1ae70956ae1fad6ae992 upstream.

Add XHCI support to R8A7742 SoC DT.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Link: https://lore.kernel.org/r/1590356277-19993-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
[biju: changed clocks and power-domain properties, removed resets property]
Signed-off-by: Biju Das <biju.das.jz@...>
---
arch/arm/boot/dts/r8a7742.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 5c516e17ca54..0da46a2edddd 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -1612,6 +1612,18 @@
dma-channels = <13>;
};

+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7742",
+ "renesas,rcar-gen2-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7742_CLK_SSUSB>;
+ power-domains = <&cpg_clocks>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7742",
"renesas,pci-rcar-gen2";
--
2.17.1


[PATCH 4.4.y-cip 6/9] usb: host: xhci-plat: Add r8a7742 support

Biju Das <biju.das.jz@...>
 

This patch adds xhci r8a7742 driver support.

There are lot of changes between upstream and 4.4 kernel and
we cannot cleanly backport the changes from upstream.

This patch is similar to commit d09ccbb73386 ("usb: host:
xhci-plat: Add r8a7743 support") present in cip kernel.

Signed-off-by: Biju Das <biju.das.jz@...>
---
drivers/usb/host/xhci-plat.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 26e0cd535deb..46e69e2db1fa 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -54,6 +54,7 @@ static int xhci_plat_setup(struct usb_hcd *hcd)

if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7791") ||
+ of_device_is_compatible(of_node, "renesas,xhci-r8a7742") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7743") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7744")) {
ret = xhci_rcar_init_quirk(hcd);
@@ -70,6 +71,7 @@ static int xhci_plat_start(struct usb_hcd *hcd)

if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7791") ||
+ of_device_is_compatible(of_node, "renesas,xhci-r8a7742") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7743") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7744"))
xhci_rcar_start(hcd);
@@ -271,6 +273,7 @@ static const struct of_device_id usb_xhci_of_match[] = {
{ .compatible = "xhci-platform" },
{ .compatible = "marvell,armada-375-xhci"},
{ .compatible = "marvell,armada-380-xhci"},
+ { .compatible = "renesas,xhci-r8a7742"},
{ .compatible = "renesas,xhci-r8a7743"},
{ .compatible = "renesas,xhci-r8a7744"},
{ .compatible = "renesas,xhci-r8a7790"},
--
2.17.1


[PATCH 4.4.y-cip 5/9] dt-bindings: usb: usb-xhci: Document r8a7742 support

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit 935796968ff8b69cb0c9f18c427899ebafd83509 upstream.

Document r8a7742 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen2-xhci", therefore no driver
change is needed.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Signed-off-by: Rob Herring <robh@...>
Signed-off-by: Biju Das <biju.das.jz@...>
---
Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index bf5192b7348e..2cd959287fe9 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -3,8 +3,8 @@ USB xHCI controllers
Required properties:
- compatible: should be one of "generic-xhci",
"marvell,armada-375-xhci", "marvell,armada-380-xhci",
- "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7743",
- "renesas,xhci-r8a7744"
+ "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7742"
+ "renesas,xhci-r8a7743", "renesas,xhci-r8a7744"
(deprecated: "xhci-platform").
- reg: should contain address and length of the standard XHCI
register set for the device.
--
2.17.1


[PATCH 4.4.y-cip 4/9] ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit b8618745829de50563470cd1e58c7ea10d6481b6 upstream.

Add USB DMAC and HSUSB device nodes on RZ/G1H SoC dtsi.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Link: https://lore.kernel.org/r/1590356277-19993-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
[biju: changed clocks and power-domain properties, removed resets property]
Signed-off-by: Biju Das <biju.das.jz@...>
---
arch/arm/boot/dts/r8a7742.dtsi | 42 ++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index b25b719fbd2b..5c516e17ca54 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -964,6 +964,22 @@
status = "disabled";
};

+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7742",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7742_CLK_HSUSB>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
usbphy: usb-phy@e6590100 {
compatible = "renesas,usb-phy-r8a7742",
"renesas,rcar-gen2-usb-phy";
@@ -985,6 +1001,32 @@
};
};

+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7742-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7742_CLK_USBDMAC0>;
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a7742-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7742_CLK_USBDMAC1>;
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7742",
"renesas,rcar-dmac";
--
2.17.1


[PATCH 4.4.y-cip 3/9] dt-bindings: usb: renesas,usbhs: Add support for r8a7742

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit c092e1356b378e8567f9d6404ac27b57a4f47ae6 upstream.

Document support for RZ/G1H (R8A7742) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Signed-off-by: Rob Herring <robh@...>
[biju: Patched text version of bindings file]
Signed-off-by: Biju Das <biju.das.jz@...>
---
Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 5a26deea5b97..d0516953b9d2 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -3,6 +3,7 @@ Renesas Electronics USBHS driver
Required properties:
- compatible: Must contain one or more of the following:

+ - "renesas,usbhs-r8a7742" for r8a7742 (RZ/G1H) compatible device
- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
--
2.17.1


[PATCH 4.4.y-cip 2/9] ARM: dts: r8a7742: Add USB 2.0 host support

Biju Das <biju.das.jz@...>
 

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>

commit 4bb19c91d38e36b81e92de3d9b4e61d9b8928b54 upstream.

Describe internal PCI bridge devices, USB phy device and
link PCI USB devices to USB phy.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...>
Link: https://lore.kernel.org/r/1590356277-19993-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@...>
[biju: changed clocks and power-domain properties, removed resets property]
Signed-off-by: Biju Das <biju.das.jz@...>
---
arch/arm/boot/dts/r8a7742.dtsi | 111 +++++++++++++++++++++++++++++++++
1 file changed, 111 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index d326602bee3f..b25b719fbd2b 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -964,6 +964,27 @@
status = "disabled";
};

+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7742",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7742_CLK_HSUSB>;
+ clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7742",
"renesas,rcar-dmac";
@@ -1549,6 +1570,96 @@
dma-channels = <13>;
};

+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7742",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7742_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0b0000 {
+ compatible = "renesas,pci-r8a7742",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee0b0000 0 0xc00>,
+ <0 0xee0a0000 0 0x1100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7742_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci2: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7742",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7742_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <2 2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x20800 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x21000 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
+
sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7742",
"renesas,rcar-gen2-sdhi";
--
2.17.1

3781 - 3800 of 9641