Date   

[PATCH 4.19.y-cip 07/32] PCI: rcar: Clean up debug messages

Fabrizio Castro <fabrizio.castro@...>
 

From: Marek Vasut <marek.vasut+renesas@...>

commit 42a58f73e9ea4002692732d45a6ea1a0df9e125b upstream.

Drop useless casts from debug messages, they are no longer needed
due to the data type cleanup.

Signed-off-by: Marek Vasut <marek.vasut+renesas@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Simon Horman <horms+renesas@...>
Reviewed-by: Wolfram Sang <wsa+renesas@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Cc: Geert Uytterhoeven <geert+renesas@...>
Cc: Phil Edworthy <phil.edworthy@...>
Cc: Simon Horman <horms+renesas@...>
Cc: Wolfram Sang <wsa@...>
Cc: linux-renesas-soc@...
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
drivers/pci/controller/pcie-rcar.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index f602c0d..6f4bad1 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -286,8 +286,8 @@ static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
else if (size == 2)
*val = (*val >> (8 * (where & 2))) & 0xffff;

- dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
- bus->number, devfn, where, size, (unsigned long)*val);
+ dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08x\n",
+ bus->number, devfn, where, size, *val);

return ret;
}
@@ -306,8 +306,8 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
if (ret != PCIBIOS_SUCCESSFUL)
return ret;

- dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
- bus->number, devfn, where, size, (unsigned long)val);
+ dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08x\n",
+ bus->number, devfn, where, size, val);

if (size == 1) {
shift = 8 * (where & 3);
--
2.7.4


[PATCH 4.19.y-cip 06/32] PCI: rcar: Replace various variable types with unsigned ones for register values

Fabrizio Castro <fabrizio.castro@...>
 

From: Marek Vasut <marek.vasut+renesas@...>

commit d8fa26609b91394f9f2d17ae6956a2c3e3632fbb upstream.

Replace various variable types with u32 or unsigned int type for
variables holding register values, since the registers are 32bit.
Note that rcar_pcie_msi_irq() still uses various variable types
because both find_first_bit() and __fls() require various variable
types as an argument.

Signed-off-by: Marek Vasut <marek.vasut+renesas@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Simon Horman <horms+renesas@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Cc: Geert Uytterhoeven <geert+renesas@...>
Cc: Phil Edworthy <phil.edworthy@...>
Cc: Simon Horman <horms+renesas@...>
Cc: Wolfram Sang <wsa@...>
Cc: linux-renesas-soc@...
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
drivers/pci/controller/pcie-rcar.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 0665892..f602c0d 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -172,7 +172,7 @@ enum {

static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
{
- int shift = 8 * (where & 3);
+ unsigned int shift = 8 * (where & 3);
u32 val = rcar_pci_read_reg(pcie, where & ~3);

val &= ~(mask << shift);
@@ -182,7 +182,7 @@ static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)

static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)
{
- int shift = 8 * (where & 3);
+ unsigned int shift = 8 * (where & 3);
u32 val = rcar_pci_read_reg(pcie, where & ~3);

return val >> shift;
@@ -193,7 +193,7 @@ static int rcar_pcie_config_access(struct rcar_pcie *pcie,
unsigned char access_type, struct pci_bus *bus,
unsigned int devfn, int where, u32 *data)
{
- int dev, func, reg, index;
+ unsigned int dev, func, reg, index;

dev = PCI_SLOT(devfn);
func = PCI_FUNC(devfn);
@@ -297,8 +297,9 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct rcar_pcie *pcie = bus->sysdata;
- int shift, ret;
+ unsigned int shift;
u32 data;
+ int ret;

ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
bus, devfn, where, &data);
@@ -508,10 +509,10 @@ static int phy_wait_for_ack(struct rcar_pcie *pcie)
}

static void phy_write_reg(struct rcar_pcie *pcie,
- unsigned int rate, unsigned int addr,
- unsigned int lane, unsigned int data)
+ unsigned int rate, u32 addr,
+ unsigned int lane, u32 data)
{
- unsigned long phyaddr;
+ u32 phyaddr;

phyaddr = WRITE_CMD |
((rate & 1) << RATE_POS) |
@@ -1123,7 +1124,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_pcie *pcie;
- unsigned int data;
+ u32 data;
int err;
int (*phy_init_fn)(struct rcar_pcie *);
struct pci_host_bridge *bridge;
--
2.7.4


[PATCH 4.19.y-cip 05/32] PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors

Fabrizio Castro <fabrizio.castro@...>
 

From: Marek Vasut <marek.vasut+renesas@...>

commit 7dc13a7939e09caa20ed3a0a8417f23b4ec4e6e2 upstream.

Replace unsigned long with u32 and unsigned int in register accessor
functions, since they access 32bit registers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Simon Horman <horms+renesas@...>
Reviewed-by: Wolfram Sang <wsa+renesas@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Cc: Geert Uytterhoeven <geert+renesas@...>
Cc: Phil Edworthy <phil.edworthy@...>
Cc: Simon Horman <horms+renesas@...>
Cc: Wolfram Sang <wsa@...>
Cc: linux-renesas-soc@...
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
drivers/pci/controller/pcie-rcar.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 9b9c677..0665892 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -154,14 +154,13 @@ struct rcar_pcie {
struct rcar_msi msi;
};

-static void rcar_pci_write_reg(struct rcar_pcie *pcie, unsigned long val,
- unsigned long reg)
+static void rcar_pci_write_reg(struct rcar_pcie *pcie, u32 val,
+ unsigned int reg)
{
writel(val, pcie->base + reg);
}

-static unsigned long rcar_pci_read_reg(struct rcar_pcie *pcie,
- unsigned long reg)
+static u32 rcar_pci_read_reg(struct rcar_pcie *pcie, unsigned int reg)
{
return readl(pcie->base + reg);
}
--
2.7.4


[PATCH 4.19.y-cip 04/32] dt-bindings: display: renesas: Add r8a774a1 support

Fabrizio Castro <fabrizio.castro@...>
 

commit 74a22e8f4350a9e096c84fc9e88cf72abf71887c upstream.

Document RZ/G2M (R8A774A1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...>
Signed-off-by: Simon Horman <horms+renesas@...>
---
Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index a41d280..db68041 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -12,10 +12,12 @@ following device-specific properties.
Required properties:

- compatible : Shall contain one or more of
+ - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
- "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
- "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
- "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
- - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
+ - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible
+ HDMI TX

When compatible with generic versions, nodes must list the SoC-specific
version corresponding to the platform first, followed by the
--
2.7.4


[PATCH 4.19.y-cip 03/32] dt-bindings: display: renesas: lvds: Document r8a774a1 bindings

Fabrizio Castro <fabrizio.castro@...>
 

From: Biju Das <biju.das@...>

commit 07c7c6bfbe03192263cc5c9550199a189cabd558 upstream.

Document the RZ/G2M (R8A774A1) LVDS bindings.

Signed-off-by: Biju Das <biju.das@...>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@...>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@...>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...>
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
index 4f0ab3e..3ede032 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -8,6 +8,7 @@ Required properties:

- compatible : Shall contain one of
- "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+ - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders
- "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
- "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
- "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
--
2.7.4


[PATCH 4.19.y-cip 02/32] dt-bindings: display: renesas: du: Document the r8a774a1 bindings

Fabrizio Castro <fabrizio.castro@...>
 

From: Biju Das <biju.das@...>

commit 2acd1d1f219946e292aa85a9e3dff35e4bb78237 upstream.

Document the RZ/G2M (R8A774A1) SoC in the R-Car DU bindings.

Signed-off-by: Biju Das <biju.das@...>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@...>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@...>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...>
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index ec9d34be..e01acc6 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -5,6 +5,7 @@ Required Properties:
- compatible: must be one of the following.
- "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
- "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
+ - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
- "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
- "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
- "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -51,6 +52,7 @@ corresponding to each DU output.
-----------------------------------------------------------------------------
R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - -
R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - -
+ R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 -
R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
--
2.7.4


[PATCH 4.19.y-cip 01/32] dt-bindings: PCI: rcar: Add device tree support for r8a774a1

Fabrizio Castro <fabrizio.castro@...>
 

From: Biju Das <biju.das@...>

commit 69bc586518e0902493c42b77652fa712fae3480f upstream.

Add PCIe support for the RZ/G2M (a.k.a. R8A774A1).

Signed-off-by: Biju Das <biju.das@...>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@...>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...>
Reviewed-by: Simon Horman <horms+renesas@...>
Acked-by: Simon Horman <horms+renesas@...>
Signed-off-by: Fabrizio Castro <fabrizio.castro@...>
---
Documentation/devicetree/bindings/pci/rcar-pci.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index fac07a4..7920d30 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -2,6 +2,7 @@

Required properties:
compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+ "renesas,pcie-r8a774a1" for the R8A774A1 SoC;
"renesas,pcie-r8a774c0" for the R8A774C0 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
--
2.7.4


[PATCH 4.19.y-cip 00/32] Add PCIe and HDMI support to HiHope RZ/G2M

Fabrizio Castro <fabrizio.castro@...>
 

Dear All,

this series adds HDMI and PCIe support for the HiHope RZ/G2M board.

Thanks,
Fab

Biju Das (14):
dt-bindings: PCI: rcar: Add device tree support for r8a774a1
dt-bindings: display: renesas: du: Document the r8a774a1 bindings
dt-bindings: display: renesas: lvds: Document r8a774a1 bindings
drm: rcar-du: Add R8A774A1 support
drm: rcar-du: lvds: Add r8a774a1 support
arm64: dts: renesas: r8a774a1: Add PCIe device nodes
arm64: dts: renesas: hihope-common: Declare pcie bus clock
arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
arm64: dts: renesas: r8a774a1: Add VSP instances
arm64: dts: renesas: r8a774a1: Add DU device to DT
arm64: dts: renesas: r8a774a1: Add FDP1 instance
arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1
arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP
arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0

Fabrizio Castro (3):
dt-bindings: display: renesas: Add r8a774a1 support
arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
arm64: dts: renesas: hihope-common: Add HDMI support

Jacopo Mondi (1):
drm: rcar-du: Rename and document dpll_ch field

Kieran Bingham (3):
drm: rcar-du: Refactor Feature and Quirk definitions
drm: rcar-du: Add interlaced feature flag
drm: rcar-du: Support interlaced video output through vsp1

Koji Matsuoka (1):
drm: rcar-du: Add support for missing pixel formats

Laurent Pinchart (6):
drm: rcar-du: dw-hdmi: Reject modes with a too high clock frequency
drm: rcar-du: Cache DSYSR value to ensure known initial value
drm: rcar-du: Don't use TV sync mode when not supported by the
hardware
drm: rcar-du: Rework clock configuration based on hardware limits
drm: rcar-du: Store V4L2 fourcc in rcar_du_format_info structure
drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3

Marek Vasut (3):
PCI: rcar: Replace unsigned long with u32/unsigned int in register
accessors
PCI: rcar: Replace various variable types with unsigned ones for
register values
PCI: rcar: Clean up debug messages

Wolfram Sang (1):
PCI: rcar: Do not shadow the 'irq' variable

.../bindings/display/bridge/renesas,dw-hdmi.txt | 4 +-
.../bindings/display/bridge/renesas,lvds.txt | 1 +
.../devicetree/bindings/display/renesas,du.txt | 2 +
Documentation/devicetree/bindings/pci/rcar-pci.txt | 1 +
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 65 ++++++
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 8 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 255 +++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 168 ++++++++------
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 5 +
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 79 +++++--
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 13 +-
drivers/gpu/drm/rcar-du/rcar_du_group.c | 7 +-
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 92 +++++++-
drivers/gpu/drm/rcar-du/rcar_du_kms.h | 1 +
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 46 +---
drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c | 15 ++
drivers/gpu/drm/rcar-du/rcar_lvds.c | 1 +
drivers/pci/controller/pcie-rcar.c | 40 ++--
18 files changed, 641 insertions(+), 162 deletions(-)

--
2.7.4


Re: gitlab: mirroring broken, tests failing

SZ Lin (林上智) <sz.lin@...>
 

Hi,

<nobuhiro1.iwamatsu@...> 於 2019年9月13日 週五 上午6:51寫道:

Hi all,

-----Original Message-----
From: cip-dev-bounces@...
[mailto:cip-dev-bounces@...] On Behalf Of Pavel
Machek
Sent: Thursday, September 12, 2019 7:15 AM
To: Chris.Paterson2@...; cip-dev@...
Subject: [cip-dev] gitlab: mirroring broken, tests failing

Hi!

I pushed kernel to kernel.org, bug I don't see it on gilab. Does mirroring
need to be restarted?

Plus, tests are failing, and it seems to me that problem is with tests,
not with kernel...
https://gitlab.com/cip-project/cip-kernel/linux-cip/-/jobs/292957614

Job submitted successfully as #3620.
------------------------------
Current job status:
Job #3605: Submitted
...
Job #3620: Submitted
Timed out waiting for test jobs to complete Errors during testing

I tried submiting known-good kernel, 3bc5ed22, and it failed, too...
I think this is caused by LAVA.
LAVA has many test queue, and is not being processed.
Yes, it's.

The gitlab mirror mechanism works fine.

SZ


https://lava.ciplatform.org/scheduler/

Chris, could you check LAVA?

Best regards,
Nobuhiro
_______________________________________________
cip-dev mailing list
cip-dev@...
https://lists.cip-project.org/mailman/listinfo/cip-dev


Postpone scheduled release

Nobuhiro Iwamatsu
 

Hi,

This friday was the regular release date for 4.4.y-cip and 4.19.y-cip.
However, because LAVA have a problem, we are currently unable to test for
Kernel.
Therefore, we postpone the release. As soon as the LAVA's problem is fixed,
we will begin the release.

Best regards,
Nobuhiro


[Git][cip-project/cip-kernel/cip-kernel-sec][bwh/update-issues] Add comment about likely un-exploitability of CVE-2019-16089

Agustin Benito Bethencourt
 

Ben Hutchings pushed to branch bwh/update-issues at cip-project / cip-kernel / cip-kernel-sec

Commits:

  • 7390255e
    by Ben Hutchings at 2019-09-13T21:14:59Z
    Add comment about likely un-exploitability of CVE-2019-16089
    
    Signed-off-by: Ben Hutchings <ben.hutchings@...>
    

1 changed file:

Changes:

  • issues/CVE-2019-16089.yml
    ... ... @@ -4,3 +4,10 @@ references:
    4 4
     - https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-16089
    
    5 5
     introduced-by:
    
    6 6
       mainline: [47d902b90a32a42a3d33aef3a02170fc6f70aa23]
    
    7
    +comment:
    
    8
    +  bwh: |
    
    9
    +    nla_nest_start() will only fail if there is insufficient space in
    
    10
    +    the given skb.  This does seem to be possible in theory, as the
    
    11
    +    size nbd_genl_status() requests does not account for the size of
    
    12
    +    nested attribute headers.  In practice skb sizes are cache-line-
    
    13
    +    aligned and that will probably avoid failure at this point.


  • [Git][cip-project/cip-kernel/cip-kernel-sec] Pushed new branch bwh/update-issues

    Agustin Benito Bethencourt
     

    Ben Hutchings pushed new branch bwh/update-issues at cip-project / cip-kernel / cip-kernel-sec


    [Git][cip-project/cip-kernel/cip-kernel-sec] Deleted branch bwh/update-issues

    Agustin Benito Bethencourt
     

    Ben Hutchings deleted branch bwh/update-issues at cip-project / cip-kernel / cip-kernel-sec


    [Git][cip-project/cip-kernel/cip-kernel-sec][master] 4 commits: Import more data

    Agustin Benito Bethencourt
     

    Ben Hutchings pushed to branch master at cip-project / cip-kernel / cip-kernel-sec

    Commits:

    • 63d17d07
      by Ben Hutchings at 2019-08-27T20:20:15Z
      Import more data
      
      This loses some comments about mitigation that came from the Ubuntu
      tracker, as they have moved to a separate field there.
      
      Signed-off-by: Ben Hutchings <ben.hutchings@...>
      
    • 59fcb837
      by Ben Hutchings at 2019-08-27T20:39:41Z
      Fill in introducing commits for several issues
      
      Signed-off-by: Ben Hutchings <ben.hutchings@...>
      
    • a349f005
      by Ben Hutchings at 2019-08-27T20:47:01Z
      Mark various issues to be ignored on CIP branches
      
      The components affected by these issues are not enabled by any members
      on some of the CIP branches.
      
      Signed-off-by: Ben Hutchings <ben.hutchings@...>
      
    • df647403
      by Ben Hutchings at 2019-09-13T18:30:55Z
      Merge branch 'bwh/update-issues' into 'master'
      
      Update issues
      
      See merge request cip-project/cip-kernel/cip-kernel-sec!10

    30 changed files:

    The diff was not included because it is too large.


    Re: gitlab: mirroring broken, tests failing

    Nobuhiro Iwamatsu
     

    Hi all,

    -----Original Message-----
    From: cip-dev-bounces@...
    [mailto:cip-dev-bounces@...] On Behalf Of Pavel
    Machek
    Sent: Thursday, September 12, 2019 7:15 AM
    To: Chris.Paterson2@...; cip-dev@...
    Subject: [cip-dev] gitlab: mirroring broken, tests failing

    Hi!

    I pushed kernel to kernel.org, bug I don't see it on gilab. Does mirroring
    need to be restarted?

    Plus, tests are failing, and it seems to me that problem is with tests,
    not with kernel...
    https://gitlab.com/cip-project/cip-kernel/linux-cip/-/jobs/292957614

    Job submitted successfully as #3620.
    ------------------------------
    Current job status:
    Job #3605: Submitted
    ...
    Job #3620: Submitted
    Timed out waiting for test jobs to complete Errors during testing

    I tried submiting known-good kernel, 3bc5ed22, and it failed, too...
    I think this is caused by LAVA.
    LAVA has many test queue, and is not being processed.

    https://lava.ciplatform.org/scheduler/

    Chris, could you check LAVA?

    Best regards,
    Nobuhiro


    Re: CIP IRC weekly meeting today

    Nobuhiro Iwamatsu
     

    Hi SZ,

    I could not attend yesterday's IRC meeting because
    I was attended in another meeting.

    * Action item
    1. Provide the cases to cip-testing to build up the test environment - Iwamatsu-san
    No update.

    And I reviewed v4.4.166.

    Best regards,
    Nobuhiro

    From: cip-dev-bounces@... [mailto:cip-dev-bounces@...] On Behalf Of SZ Lin (林上智)
    Sent: Thursday, September 12, 2019 10:38 AM
    To: cip-dev@...
    Subject: [cip-dev] CIP IRC weekly meeting today

    Hi all,

    Kindly be reminded to attend the weekly meeting through IRC to discuss technical topics with CIP kernel today.

    *Please note that IRC meeting was rescheduled to UTC (GMT) 09:00 starting from the first week of Apr. according to TSC meeting*
    https://www.timeanddate.com/worldclock/meetingdetails.html?year=2019&month=9&day=12&hour=9&min=0&sec=0&p1=241&p2=137&p3=179&p4=136&p5=37&p6=248
             
    US-West US-East   UK     DE     TW     JP
    02:00    05:00   10:00   11:00   17:00   18:00

    Channel:
    * irc:chat.freenode.net:6667/cip

    Agenda:

    * Action item
    1. Provide the cases to cip-testing to build up the test environment - Iwamatsu-san

    2. Ask cip-dev which configurations need testing - patersonc

    3. Test LTS (pre)releases directly – patersonc

    * Kernel maintenance updates
    * Kernel testing
    * CIP Core
    * Software update
    * AOB

    The meeting will take 30 min, although it can be extended to an hour if it makes sense and those involved in the topics can stay. Otherwise, the topic will be taken offline or in the next meeting.

    Best regards,

    SZ Lin, Moxa.


    CIP IRC weekly meeting today

    SZ Lin (林上智) <SZ.Lin@...>
     

    Hi all,

     

    Kindly be reminded to attend the weekly meeting through IRC to discuss technical topics with CIP kernel today.

     

    *Please note that IRC meeting was rescheduled to UTC (GMT) 09:00 starting from the first week of Apr. according to TSC meeting*

    https://www.timeanddate.com/worldclock/meetingdetails.html?year=2019&month=9&day=12&hour=9&min=0&sec=0&p1=241&p2=137&p3=179&p4=136&p5=37&p6=248

             

    US-West US-East   UK     DE     TW     JP

    02:00    05:00   10:00   11:00   17:00   18:00

     

    Channel:

    * irc:chat.freenode.net:6667/cip

     

    Agenda:

     

    * Action item

    1. Provide the cases to cip-testing to build up the test environment - Iwamatsu-san

     

    2. Ask cip-dev which configurations need testing - patersonc

     

    3. Test LTS (pre)releases directly patersonc

     

    * Kernel maintenance updates

    * Kernel testing

    * CIP Core

    * Software update

    * AOB

     

    The meeting will take 30 min, although it can be extended to an hour if it makes sense and those involved in the topics can stay. Otherwise, the topic will be taken offline or in the next meeting.

     

    Best regards,

     

    SZ Lin, Moxa.


    gitlab: mirroring broken, tests failing

    Pavel Machek
     

    Hi!

    I pushed kernel to kernel.org, bug I don't see it on gilab. Does
    mirroring need to be restarted?

    Plus, tests are failing, and it seems to me that problem is with
    tests, not with
    kernel... https://gitlab.com/cip-project/cip-kernel/linux-cip/-/jobs/292957614

    Job submitted successfully as #3620.
    ------------------------------
    Current job status:
    Job #3605: Submitted
    ...
    Job #3620: Submitted
    Timed out waiting for test jobs to complete
    Errors during testing

    I tried submiting known-good kernel, 3bc5ed22, and it failed, too...

    Best regards,
    Pavel

    --
    (english) http://www.livejournal.com/~pavelmachek
    (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


    Re: [PATCH 4.19.y-cip 0/4] Add USB support

    Pavel Machek
     

    On Wed 2019-09-11 09:54:27, Pavel Machek wrote:
    Hi!

    This patch series add USB2.0/USB3.0 support for Hihope RZ/G2M platform.

    This patch series is based on linux-4.19.y-cip and all the patches
    in this series are cherry-picked from linux rc tree.

    Biju Das (3):
    arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
    arm64: dts: renesas: hihope-common: Add USB 2.0 support
    arm64: dts: renesas: hihope-common: Enable USB3.0

    Yoshihiro Shimoda (1):
    phy: renesas: rcar-gen3-usb2: fix imbalance powered flag
    Nothing obviously wrong here. Let me apply the series...
    Hmm, so according to gitlab Iwamatsu already tried to apply the
    series, and got failure in self-test. Let me submit aa6c3bd087e5f39
    for testing to see if it is problem with testing or problem with code.

    https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/81577156

    ...so it seems problem is with tests.

    I applied the series and pushed it to kernel.org. Thanks!

    Best regards,
    Pavel

    --
    DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
    HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


    Re: [PATCH 4.19.y-cip 0/4] Add USB support

    Pavel Machek
     

    Hi!

    This patch series add USB2.0/USB3.0 support for Hihope RZ/G2M platform.

    This patch series is based on linux-4.19.y-cip and all the patches
    in this series are cherry-picked from linux rc tree.

    Biju Das (3):
    arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
    arm64: dts: renesas: hihope-common: Add USB 2.0 support
    arm64: dts: renesas: hihope-common: Enable USB3.0

    Yoshihiro Shimoda (1):
    phy: renesas: rcar-gen3-usb2: fix imbalance powered flag
    Nothing obviously wrong here. Let me apply the series...

    Best regards,
    Pavel
    --
    DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
    HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

    6401 - 6420 of 9641