Date   

[PATCH 4.19.y-cip 0/8] Optimize pinctrl and add QSPI[01] pins for RZ/G2{H,M,N,E}

Lad Prabhakar
 

Hi All,

This patch series optimizes pinctrl driver for size and adds QSPI[01]
pins for RZ/G2{H,M,N,E} SoC.

All the patches have been cherry picked from v5.11-rc2

Currently the SoC DTSI changes are being upstreamed [1] once this hits -rc
this will be backported to the CIP. This is for users who currently plan to
enable RPC-IF on CIP kernel (using patches from [1] to enable RPC-IF).

[1] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=408139

Cheers,
Prabhakar

Biju Das (4):
pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1
pinctrl: renesas: r8a77951: Optimize pinctrl image size for R8A774E1
pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1
pinctrl: renesas: r8a77990: Optimize pinctrl image size for R8A774C0

Lad Prabhakar (4):
pinctrl: renesas: r8a77990: Add QSPI[01] pins, groups and functions
pinctrl: renesas: r8a77951: Add QSPI[01] pins, groups and functions
pinctrl: renesas: r8a7796: Add QSPI[01] pins, groups and functions
pinctrl: renesas: r8a77965: Add QSPI[01] pins, groups and functions

drivers/pinctrl/sh-pfc/pfc-r8a77951.c | 89 +++++++++++++++++++++++++--
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 87 +++++++++++++++++++++++++-
drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 87 +++++++++++++++++++++++++-
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 87 +++++++++++++++++++++++++-
4 files changed, 340 insertions(+), 10 deletions(-)

--
2.17.1


[PATCH 4.19.y-cip 3/3] clk: renesas: r8a774c0: Add RPC clocks

Lad Prabhakar
 

commit 40745482eec81bea686cd1b38693191dc7e9ac66 upstream.

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR
driver.

Add new clk type CLK_TYPE_GEN3_E3_RPCSRC to register rpcsrc as a fixed
clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC),
parent and the divider is set based on the register value CPG_RPCCKCR[4:3]
which has been set prior to booting the kernel.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201116101002.5986-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/clk/renesas/r8a774c0-cpg-mssr.c | 9 ++++++++
drivers/clk/renesas/rcar-gen3-cpg.c | 28 +++++++++++++++++++++++++
drivers/clk/renesas/rcar-gen3-cpg.h | 5 +++++
3 files changed, 42 insertions(+)

diff --git a/drivers/clk/renesas/r8a774c0-cpg-mssr.c b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
index 9fc9fa9e531a..ed3a2cf0e0bb 100644
--- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
@@ -44,6 +44,7 @@ enum clk_ids {
CLK_S2,
CLK_S3,
CLK_SDSRC,
+ CLK_RPCSRC,
CLK_RINT,
CLK_OCO,

@@ -74,6 +75,13 @@ static const struct cpg_core_clk r8a774c0_core_clks[] __initconst = {
DEF_FIXED(".s3", CLK_S3, CLK_PLL1, 6, 1),
DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1, 2, 1),

+ DEF_FIXED_RPCSRC_E3(".rpcsrc", CLK_RPCSRC, CLK_PLL0, CLK_PLL1),
+
+ DEF_BASE("rpc", R8A774C0_CLK_RPC, CLK_TYPE_GEN3_RPC,
+ CLK_RPCSRC),
+ DEF_BASE("rpcd2", R8A774C0_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+ R8A774C0_CLK_RPC),
+
DEF_DIV6_RO(".r", CLK_RINT, CLK_EXTAL, CPG_RCKCR, 32),

DEF_RATE(".oco", CLK_OCO, 8 * 1000 * 1000),
@@ -199,6 +207,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = {
DEF_MOD("can-fd", 914, R8A774C0_CLK_S3D2),
DEF_MOD("can-if1", 915, R8A774C0_CLK_S3D4),
DEF_MOD("can-if0", 916, R8A774C0_CLK_S3D4),
+ DEF_MOD("rpc-if", 917, R8A774C0_CLK_RPCD2),
DEF_MOD("i2c6", 918, R8A774C0_CLK_S3D2),
DEF_MOD("i2c5", 919, R8A774C0_CLK_S3D2),
DEF_MOD("i2c-dvfs", 926, R8A774C0_CLK_CP),
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 6230a7c40244..239d4aa63b98 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -693,6 +693,34 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
cpg_rpcsrc_div_table,
&cpg_lock);

+ case CLK_TYPE_GEN3_E3_RPCSRC:
+ /*
+ * Register RPCSRC as fixed factor clock based on the
+ * MD[4:1] pins and CPG_RPCCKCR[4:3] register value for
+ * which has been set prior to booting the kernel.
+ */
+ value = (readl(base + CPG_RPCCKCR) & GENMASK(4, 3)) >> 3;
+
+ switch (value) {
+ case 0:
+ div = 5;
+ break;
+ case 1:
+ div = 3;
+ break;
+ case 2:
+ parent = clks[core->parent >> 16];
+ if (IS_ERR(parent))
+ return ERR_CAST(parent);
+ div = core->div;
+ break;
+ case 3:
+ default:
+ div = 2;
+ break;
+ }
+ break;
+
case CLK_TYPE_GEN3_RPC:
return cpg_rpc_clk_register(core->name, base,
__clk_get_name(parent), notifiers);
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index 2b39499c855c..2c927cecda09 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -26,6 +26,7 @@ enum rcar_gen3_clk_types {
CLK_TYPE_GEN3_OSC, /* OSC EXTAL predivider and fixed divider */
CLK_TYPE_GEN3_RCKSEL, /* Select parent/divider using RCKCR.CKSEL */
CLK_TYPE_GEN3_RPCSRC,
+ CLK_TYPE_GEN3_E3_RPCSRC,
CLK_TYPE_GEN3_RPC,
CLK_TYPE_GEN3_RPCD2,
};
@@ -53,6 +54,10 @@ enum rcar_gen3_clk_types {
#define DEF_GEN3_Z(_name, _id, _type, _parent, _div, _offset) \
DEF_BASE(_name, _id, _type, _parent, .div = _div, .offset = _offset)

+#define DEF_FIXED_RPCSRC_E3(_name, _id, _parent0, _parent1) \
+ DEF_BASE(_name, _id, CLK_TYPE_GEN3_E3_RPCSRC, \
+ (_parent0) << 16 | (_parent1), .div = 8)
+
struct rcar_gen3_cpg_pll_config {
u8 extal_div;
u8 pll1_mult;
--
2.17.1


[PATCH 4.19.y-cip 2/3] clk: renesas: r8a774b1: Add RPC clocks

Lad Prabhakar
 

From: Biju Das <biju.das.jz@bp.renesas.com>

commit fb9805c51793339e0affbc8e3ce2b3210b41c9fa upstream.

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2N (R8A774B1) CPG/MSSR
driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201016121709.8447-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/clk/renesas/r8a774b1-cpg-mssr.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/clk/renesas/r8a774b1-cpg-mssr.c b/drivers/clk/renesas/r8a774b1-cpg-mssr.c
index f436691271ec..6f04c40fe237 100644
--- a/drivers/clk/renesas/r8a774b1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774b1-cpg-mssr.c
@@ -40,6 +40,7 @@ enum clk_ids {
CLK_S2,
CLK_S3,
CLK_SDSRC,
+ CLK_RPCSRC,
CLK_RINT,

/* Module Clocks */
@@ -65,6 +66,12 @@ static const struct cpg_core_clk r8a774b1_core_clks[] __initconst = {
DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1),
+ DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+ DEF_BASE("rpc", R8A774B1_CLK_RPC, CLK_TYPE_GEN3_RPC,
+ CLK_RPCSRC),
+ DEF_BASE("rpcd2", R8A774B1_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+ R8A774B1_CLK_RPC),

DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32),

@@ -196,6 +203,7 @@ static const struct mssr_mod_clk r8a774b1_mod_clks[] __initconst = {
DEF_MOD("can-fd", 914, R8A774B1_CLK_S3D2),
DEF_MOD("can-if1", 915, R8A774B1_CLK_S3D4),
DEF_MOD("can-if0", 916, R8A774B1_CLK_S3D4),
+ DEF_MOD("rpc-if", 917, R8A774B1_CLK_RPCD2),
DEF_MOD("i2c6", 918, R8A774B1_CLK_S0D6),
DEF_MOD("i2c5", 919, R8A774B1_CLK_S0D6),
DEF_MOD("i2c-dvfs", 926, R8A774B1_CLK_CP),
--
2.17.1


[PATCH 4.19.y-cip 1/3] clk: renesas: r8a774a1: Add RPC clocks

Lad Prabhakar
 

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 13d2617bf224351e78141183ca51971df83a9dd5 upstream.

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2M (R8A774A1) CPG/MSSR
driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201016121709.8447-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/clk/renesas/r8a774a1-cpg-mssr.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
index fd54b9f625da..4a43ebec7d5e 100644
--- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
@@ -41,6 +41,7 @@ enum clk_ids {
CLK_S2,
CLK_S3,
CLK_SDSRC,
+ CLK_RPCSRC,
CLK_RINT,

/* Module Clocks */
@@ -67,6 +68,12 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {
DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1),
+ DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+ DEF_BASE("rpc", R8A774A1_CLK_RPC, CLK_TYPE_GEN3_RPC,
+ CLK_RPCSRC),
+ DEF_BASE("rpcd2", R8A774A1_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+ R8A774A1_CLK_RPC),

DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32),

@@ -200,6 +207,7 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = {
DEF_MOD("can-fd", 914, R8A774A1_CLK_S3D2),
DEF_MOD("can-if1", 915, R8A774A1_CLK_S3D4),
DEF_MOD("can-if0", 916, R8A774A1_CLK_S3D4),
+ DEF_MOD("rpc-if", 917, R8A774A1_CLK_RPCD2),
DEF_MOD("i2c6", 918, R8A774A1_CLK_S0D6),
DEF_MOD("i2c5", 919, R8A774A1_CLK_S0D6),
DEF_MOD("i2c-dvfs", 926, R8A774A1_CLK_CP),
--
2.17.1


[PATCH 4.19.y-cip 0/3] Add missing rpc-if clock on RZ/G2{E,M,N} SoC's

Lad Prabhakar
 

Hi All,

This patch series adds missing rpc-if clock on RZ/G2{E,M,N} SoC's.

All the patches have been cherry picked from v5.11-rc2.

Cheers,
Prabhakar

Biju Das (2):
clk: renesas: r8a774a1: Add RPC clocks
clk: renesas: r8a774b1: Add RPC clocks

Lad Prabhakar (1):
clk: renesas: r8a774c0: Add RPC clocks

drivers/clk/renesas/r8a774a1-cpg-mssr.c | 8 +++++++
drivers/clk/renesas/r8a774b1-cpg-mssr.c | 8 +++++++
drivers/clk/renesas/r8a774c0-cpg-mssr.c | 9 ++++++++
drivers/clk/renesas/rcar-gen3-cpg.c | 28 +++++++++++++++++++++++++
drivers/clk/renesas/rcar-gen3-cpg.h | 5 +++++
5 files changed, 58 insertions(+)

--
2.17.1


[PATCH v3 4.19.y-cip 17/17] spi: rpc-if: Fix use-after-free on unbind

Lad Prabhakar
 

From: Lukas Wunner <lukas@wunner.de>

commit 393f981ca5f797b58b882d42b7621fb6e43c7f5b upstream.

rpcif_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: eb8d6d464a27 ("spi: add Renesas RPC-IF driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v5.9+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v5.9+
Cc: Sergei Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/c5da472c28021da2f6517441685cef033d40b140.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-rpc-if.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c
index ed3e548227f4..3579675485a5 100644
--- a/drivers/spi/spi-rpc-if.c
+++ b/drivers/spi/spi-rpc-if.c
@@ -134,7 +134,7 @@ static int rpcif_spi_probe(struct platform_device *pdev)
struct rpcif *rpc;
int error;

- ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+ ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*rpc));
if (!ctlr)
return -ENOMEM;

@@ -159,13 +159,8 @@ static int rpcif_spi_probe(struct platform_device *pdev)
error = spi_register_controller(ctlr);
if (error) {
dev_err(&pdev->dev, "spi_register_controller failed\n");
- goto err_put_ctlr;
+ rpcif_disable_rpm(rpc);
}
- return 0;
-
-err_put_ctlr:
- rpcif_disable_rpm(rpc);
- spi_controller_put(ctlr);

return error;
}
--
2.17.1


[PATCH v3 4.19.y-cip 16/17] spi: add Renesas RPC-IF driver

Lad Prabhakar
 

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit eb8d6d464a27850498dced21a8450e85d4a02009 upstream.

Add the SPI driver for the Renesas RPC-IF. It's the "front end" driver
using the "back end" APIs in the main driver to talk to the real hardware.
We only implement the 'spi-mem' interface -- there's no need to implement
the usual SPI driver methods...

Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/1ece0e6c-71af-f0f1-709e-571f4b0b4853@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/Kconfig | 6 ++
drivers/spi/Makefile | 1 +
drivers/spi/spi-rpc-if.c | 216 +++++++++++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 drivers/spi/spi-rpc-if.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0a7fd56c1ed9..461315967f96 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -514,6 +514,12 @@ config SPI_RB4XX
help
SPI controller driver for the Mikrotik RB4xx series boards.

+config SPI_RPCIF
+ tristate "Renesas RPC-IF SPI driver"
+ depends on RENESAS_RPCIF
+ help
+ SPI driver for Renesas R-Car Gen3 RPC-IF.
+
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index a90d55970036..e0b5478fde62 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c
new file mode 100644
index 000000000000..ed3e548227f4
--- /dev/null
+++ b/drivers/spi/spi-rpc-if.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// RPC-IF SPI/QSPI/Octa driver
+//
+// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
+// Copyright (C) 2019 Macronix International Co., Ltd.
+// Copyright (C) 2019 - 2020 Cogent Embedded, Inc.
+//
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <memory/renesas-rpc-if.h>
+
+#include <asm/unaligned.h>
+
+static void rpcif_spi_mem_prepare(struct spi_device *spi_dev,
+ const struct spi_mem_op *spi_op,
+ u64 *offs, size_t *len)
+{
+ struct rpcif *rpc = spi_controller_get_devdata(spi_dev->controller);
+ struct rpcif_op rpc_op = { };
+
+ rpc_op.cmd.opcode = spi_op->cmd.opcode;
+ rpc_op.cmd.buswidth = spi_op->cmd.buswidth;
+
+ if (spi_op->addr.nbytes) {
+ rpc_op.addr.buswidth = spi_op->addr.buswidth;
+ rpc_op.addr.nbytes = spi_op->addr.nbytes;
+ rpc_op.addr.val = spi_op->addr.val;
+ }
+
+ if (spi_op->dummy.nbytes) {
+ rpc_op.dummy.buswidth = spi_op->dummy.buswidth;
+ rpc_op.dummy.ncycles = spi_op->dummy.nbytes * 8 /
+ spi_op->dummy.buswidth;
+ }
+
+ if (spi_op->data.nbytes || (offs && len)) {
+ rpc_op.data.buswidth = spi_op->data.buswidth;
+ rpc_op.data.nbytes = spi_op->data.nbytes;
+ switch (spi_op->data.dir) {
+ case SPI_MEM_DATA_IN:
+ rpc_op.data.dir = RPCIF_DATA_IN;
+ rpc_op.data.buf.in = spi_op->data.buf.in;
+ break;
+ case SPI_MEM_DATA_OUT:
+ rpc_op.data.dir = RPCIF_DATA_OUT;
+ rpc_op.data.buf.out = spi_op->data.buf.out;
+ break;
+ case SPI_MEM_NO_DATA:
+ rpc_op.data.dir = RPCIF_NO_DATA;
+ break;
+ }
+ } else {
+ rpc_op.data.dir = RPCIF_NO_DATA;
+ }
+
+ rpcif_prepare(rpc, &rpc_op, offs, len);
+}
+
+static bool rpcif_spi_mem_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (!spi_mem_default_supports_op(mem, op))
+ return false;
+
+ if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+ op->dummy.buswidth > 4 || op->cmd.buswidth > 4 ||
+ op->addr.nbytes > 4)
+ return false;
+
+ return true;
+}
+
+static ssize_t rpcif_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(desc->mem->spi->controller);
+
+ if (offs + desc->info.offset + len > U32_MAX)
+ return -EINVAL;
+
+ rpcif_spi_mem_prepare(desc->mem->spi, &desc->info.op_tmpl, &offs, &len);
+
+ return rpcif_dirmap_read(rpc, offs, len, buf);
+}
+
+static int rpcif_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(desc->mem->spi->controller);
+
+ if (desc->info.offset + desc->info.length > U32_MAX)
+ return -ENOTSUPP;
+
+ if (!rpcif_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+ return -ENOTSUPP;
+
+ if (!rpc->dirmap && desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
+ return -ENOTSUPP;
+
+ if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
+ return -ENOTSUPP;
+
+ return 0;
+}
+
+static int rpcif_spi_mem_exec_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct rpcif *rpc =
+ spi_controller_get_devdata(mem->spi->controller);
+
+ rpcif_spi_mem_prepare(mem->spi, op, NULL, NULL);
+
+ return rpcif_manual_xfer(rpc);
+}
+
+static const struct spi_controller_mem_ops rpcif_spi_mem_ops = {
+ .supports_op = rpcif_spi_mem_supports_op,
+ .exec_op = rpcif_spi_mem_exec_op,
+ .dirmap_create = rpcif_spi_mem_dirmap_create,
+ .dirmap_read = rpcif_spi_mem_dirmap_read,
+};
+
+static int rpcif_spi_probe(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct spi_controller *ctlr;
+ struct rpcif *rpc;
+ int error;
+
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+ if (!ctlr)
+ return -ENOMEM;
+
+ rpc = spi_controller_get_devdata(ctlr);
+ rpcif_sw_init(rpc, parent);
+
+ platform_set_drvdata(pdev, ctlr);
+
+ ctlr->dev.of_node = parent->of_node;
+
+ rpcif_enable_rpm(rpc);
+
+ ctlr->num_chipselect = 1;
+ ctlr->mem_ops = &rpcif_spi_mem_ops;
+
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
+ ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
+
+ rpcif_hw_init(rpc, false);
+
+ error = spi_register_controller(ctlr);
+ if (error) {
+ dev_err(&pdev->dev, "spi_register_controller failed\n");
+ goto err_put_ctlr;
+ }
+ return 0;
+
+err_put_ctlr:
+ rpcif_disable_rpm(rpc);
+ spi_controller_put(ctlr);
+
+ return error;
+}
+
+static int rpcif_spi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr = platform_get_drvdata(pdev);
+ struct rpcif *rpc = spi_controller_get_devdata(ctlr);
+
+ spi_unregister_controller(ctlr);
+ rpcif_disable_rpm(rpc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rpcif_spi_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_suspend(ctlr);
+}
+
+static int rpcif_spi_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+ return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpcif_spi_pm_ops, rpcif_spi_suspend, rpcif_spi_resume);
+#define DEV_PM_OPS (&rpcif_spi_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver rpcif_spi_driver = {
+ .probe = rpcif_spi_probe,
+ .remove = rpcif_spi_remove,
+ .driver = {
+ .name = "rpc-if-spi",
+ .pm = DEV_PM_OPS,
+ },
+};
+module_platform_driver(rpcif_spi_driver);
+
+MODULE_DESCRIPTION("Renesas RPC-IF SPI driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1


[PATCH v3 4.19.y-cip 15/17] spi: spi-mem: Fix a memory leak in spi_mem_dirmap_destroy()

Lad Prabhakar
 

From: Boris Brezillon <bbrezillon@kernel.org>

commit bfecfd6e23bf677c85828eb20fa4b13a18bffe23 upstream.

The dirmap descriptor object allocated in spi_mem_dirmap_create is
never freed. Add a kfree(desc) in spi_mem_dirmap_destroy().

Fixes: aa167f3fed0c ("spi: spi-mem: Add a new API to support direct mapping")
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 0998ebc2689d..c3a08afb6edf 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -542,6 +542,8 @@ void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)

if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy)
ctlr->mem_ops->dirmap_destroy(desc);
+
+ kfree(desc);
}
EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);

--
2.17.1


[PATCH v3 4.19.y-cip 14/17] spi: spi-mem: Fix spi_mem_dirmap_destroy() kerneldoc

Lad Prabhakar
 

From: Boris Brezillon <bbrezillon@kernel.org>

commit 5c0c4ec9ba61a98ecb79036afc013bba8d5b85e3 upstream.

spi_mem_dirmap_destroy() takes a single argument, remove the @info entry
in the doc.

Fixes: aa167f3fed0c ("spi: spi-mem: Add a new API to support direct mapping")
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 3d7a4183d475..0998ebc2689d 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -532,7 +532,6 @@ EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
/**
* spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
* @desc: the direct mapping descriptor to destroy
- * @info: direct mapping information
*
* This function destroys a direct mapping descriptor previously created by
* spi_mem_dirmap_create().
--
2.17.1


[PATCH v3 4.19.y-cip 13/17] spi: spi-mem: Add a new API to support direct mapping

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit aa167f3fed0c37e0e4c707d4331d827661f46644 upstream.

Most modern SPI controllers can directly map a SPI memory (or a portion
of the SPI memory) in the CPU address space. Most of the time this
brings significant performance improvements as it automates the whole
process of sending SPI memory operations every time a new region is
accessed.

This new API allows SPI memory drivers to create direct mappings and
then use them to access the memory instead of using spi_mem_exec_op().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 204 ++++++++++++++++++++++++++++++++++++
include/linux/spi/spi-mem.h | 80 ++++++++++++++
2 files changed, 284 insertions(+)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 02cf8c3f7350..3d7a4183d475 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -434,6 +434,210 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
}
EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);

+static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.in = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.out = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+/**
+ * spi_mem_dirmap_create() - Create a direct mapping descriptor
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * This function is creating a direct mapping descriptor which can then be used
+ * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write().
+ * If the SPI controller driver does not support direct mapping, this function
+ * fallback to an implementation using spi_mem_exec_op(), so that the caller
+ * doesn't have to bother implementing a fallback on his own.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+ struct spi_mem_dirmap_desc *desc;
+ int ret = -ENOTSUPP;
+
+ /* Make sure the number of address cycles is between 1 and 8 bytes. */
+ if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8)
+ return ERR_PTR(-EINVAL);
+
+ /* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */
+ if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA)
+ return ERR_PTR(-EINVAL);
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return ERR_PTR(-ENOMEM);
+
+ desc->mem = mem;
+ desc->info = *info;
+ if (ctlr->mem_ops && ctlr->mem_ops->dirmap_create)
+ ret = ctlr->mem_ops->dirmap_create(desc);
+
+ if (ret) {
+ desc->nodirmap = true;
+ if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+ ret = -ENOTSUPP;
+ else
+ ret = 0;
+ }
+
+ if (ret) {
+ kfree(desc);
+ return ERR_PTR(ret);
+ }
+
+ return desc;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
+
+/**
+ * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
+ * @desc: the direct mapping descriptor to destroy
+ * @info: direct mapping information
+ *
+ * This function destroys a direct mapping descriptor previously created by
+ * spi_mem_dirmap_create().
+ */
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+
+ if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy)
+ ctlr->mem_ops->dirmap_destroy(desc);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);
+
+/**
+ * spi_mem_dirmap_dirmap_read() - Read data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start reading from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: destination buffer. This buffer must be DMA-able
+ *
+ * This function reads data from a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data read from the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_read() again when that happens.
+ */
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap) {
+ ret = spi_mem_no_dirmap_read(desc, offs, len, buf);
+ } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
+
+/**
+ * spi_mem_dirmap_dirmap_write() - Write data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start writing from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: source buffer. This buffer must be DMA-able
+ *
+ * This function writes data to a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data written to the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_write() again when that happens.
+ */
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap) {
+ ret = spi_mem_no_dirmap_write(desc, offs, len, buf);
+ } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_write) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_write(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_write);
+
static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
{
return container_of(drv, struct spi_mem_driver, spidrv.driver);
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 253a8d451d4c..762b3974cf9c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -124,6 +124,49 @@ struct spi_mem_op {
.data = __data, \
}

+/**
+ * struct spi_mem_dirmap_info - Direct mapping information
+ * @op_tmpl: operation template that should be used by the direct mapping when
+ * the memory device is accessed
+ * @offset: absolute offset this direct mapping is pointing to
+ * @length: length in byte of this direct mapping
+ *
+ * These information are used by the controller specific implementation to know
+ * the portion of memory that is directly mapped and the spi_mem_op that should
+ * be used to access the device.
+ * A direct mapping is only valid for one direction (read or write) and this
+ * direction is directly encoded in the ->op_tmpl.data.dir field.
+ */
+struct spi_mem_dirmap_info {
+ struct spi_mem_op op_tmpl;
+ u64 offset;
+ u64 length;
+};
+
+/**
+ * struct spi_mem_dirmap_desc - Direct mapping descriptor
+ * @mem: the SPI memory device this direct mapping is attached to
+ * @info: information passed at direct mapping creation time
+ * @nodirmap: set to 1 if the SPI controller does not implement
+ * ->mem_ops->dirmap_create() or when this function returned an
+ * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}()
+ * calls will use spi_mem_exec_op() to access the memory. This is a
+ * degraded mode that allows spi_mem drivers to use the same code
+ * no matter whether the controller supports direct mapping or not
+ * @priv: field pointing to controller specific data
+ *
+ * Common part of a direct mapping descriptor. This object is created by
+ * spi_mem_dirmap_create() and controller implementation of ->create_dirmap()
+ * can create/attach direct mapping resources to the descriptor in the ->priv
+ * field.
+ */
+struct spi_mem_dirmap_desc {
+ struct spi_mem *mem;
+ struct spi_mem_dirmap_info info;
+ unsigned int nodirmap;
+ void *priv;
+};
+
/**
* struct spi_mem - describes a SPI memory device
* @spi: the underlying SPI device
@@ -179,10 +222,32 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
* Note that if the implementation of this function allocates memory
* dynamically, then it should do so with devm_xxx(), as we don't
* have a ->free_name() function.
+ * @dirmap_create: create a direct mapping descriptor that can later be used to
+ * access the memory device. This method is optional
+ * @dirmap_destroy: destroy a memory descriptor previous created by
+ * ->dirmap_create()
+ * @dirmap_read: read data from the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_read() is responsible for calling it again in
+ * this case.
+ * @dirmap_write: write data to the memory device using the direct mapping
+ * created by ->dirmap_create(). The function can return less
+ * data than requested (for example when the request is crossing
+ * the currently mapped area), and the caller of
+ * spi_mem_dirmap_write() is responsible for calling it again in
+ * this case.
*
* This interface should be implemented by SPI controllers providing an
* high-level interface to execute SPI memory operation, which is usually the
* case for QSPI controllers.
+ *
+ * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct
+ * mapping from the CPU because doing that can stall the CPU waiting for the
+ * SPI mem transaction to finish, and this will make real-time maintainers
+ * unhappy and might make your system less reactive. Instead, drivers should
+ * use DMA to access this direct mapping.
*/
struct spi_controller_mem_ops {
int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op);
@@ -191,6 +256,12 @@ struct spi_controller_mem_ops {
int (*exec_op)(struct spi_mem *mem,
const struct spi_mem_op *op);
const char *(*get_name)(struct spi_mem *mem);
+ int (*dirmap_create)(struct spi_mem_dirmap_desc *desc);
+ void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc);
+ ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
};

/**
@@ -262,6 +333,15 @@ int spi_mem_exec_op(struct spi_mem *mem,

const char *spi_mem_get_name(struct spi_mem *mem);

+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info);
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc);
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf);
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf);
+
int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
struct module *owner);

--
2.17.1


[PATCH v3 4.19.y-cip 12/17] spi: spi-mem: Compute length only when needed

Lad Prabhakar
 

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit c0e035ac56680e74b27fc218c07e70f4b9b8b7a5 upstream.

When adjust_op_size is defined, len is never used. Move the len
computation where it's actually used.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200228160735.1565047-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 59f7aa117a10..02cf8c3f7350 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -412,12 +412,13 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
struct spi_controller *ctlr = mem->spi->controller;
size_t len;

- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
-
if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);

if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+ len = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
if (len > spi_max_transfer_size(mem->spi))
return -EINVAL;

--
2.17.1


[PATCH v3 4.19.y-cip 11/17] spi: spi-mem: Fix passing zero to 'PTR_ERR' warning

Lad Prabhakar
 

From: YueHaibing <yuehaibing@huawei.com>

commit a9c52d42814a44472fe1205775320ec20f556908 upstream.

Fix smatch warning:

drivers/spi/spi-mem.c:746 spi_mem_probe() warn: passing zero to 'PTR_ERR'

Fixes: 5d27a9c8ea9e ("spi: spi-mem: Extend the SPI mem interface to set a custom memory name")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201031033042.42892-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 2607981d973d..59f7aa117a10 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -456,7 +456,7 @@ static int spi_mem_probe(struct spi_device *spi)
mem->name = dev_name(&spi->dev);

if (IS_ERR_OR_NULL(mem->name))
- return PTR_ERR(mem->name);
+ return PTR_ERR_OR_ZERO(mem->name);

spi_set_drvdata(spi, mem);

--
2.17.1


[PATCH v3 4.19.y-cip 10/17] spi: spi-mem: fix reference leak in spi_mem_access_start

Lad Prabhakar
 

From: Zhang Qilong <zhangqilong3@huawei.com>

commit c02bb16b0e826bf0e19aa42c3ae60ea339f32cf5 upstream.

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in spi_mem_access_start, so we should fix it.

Fixes: f86c24f479530 ("spi: spi-mem: Split spi_mem_exec_op() code")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103140910.3482-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 0908f979f6a8..2607981d973d 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -228,6 +228,7 @@ static int spi_mem_access_start(struct spi_mem *mem)

ret = pm_runtime_get_sync(ctlr->dev.parent);
if (ret < 0) {
+ pm_runtime_put_noidle(ctlr->dev.parent);
dev_err(&ctlr->dev, "Failed to power device: %d\n",
ret);
return ret;
--
2.17.1


[PATCH v3 4.19.y-cip 09/17] spi: spi-mem: Split spi_mem_exec_op() code

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit f86c24f4795303e4024bc113196de32782f6ccb5 upstream.

The logic surrounding the ->exec_op() call applies to direct mapping
accessors. Move this code to separate functions to avoid duplicating
code.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 63 ++++++++++++++++++++++++++++---------------
1 file changed, 42 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index b319a9f0138c..0908f979f6a8 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -213,6 +213,44 @@ bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
}
EXPORT_SYMBOL_GPL(spi_mem_supports_op);

+static int spi_mem_access_start(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ /*
+ * Flush the message queue before executing our SPI memory
+ * operation to prevent preemption of regular SPI transfers.
+ */
+ spi_flush_queue(ctlr);
+
+ if (ctlr->auto_runtime_pm) {
+ int ret;
+
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ dev_err(&ctlr->dev, "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ mutex_lock(&ctlr->bus_lock_mutex);
+ mutex_lock(&ctlr->io_mutex);
+
+ return 0;
+}
+
+static void spi_mem_access_end(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ mutex_unlock(&ctlr->io_mutex);
+ mutex_unlock(&ctlr->bus_lock_mutex);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+}
+
/**
* spi_mem_exec_op() - Execute a memory operation
* @mem: the SPI memory
@@ -242,30 +280,13 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
return -ENOTSUPP;

if (ctlr->mem_ops) {
- /*
- * Flush the message queue before executing our SPI memory
- * operation to prevent preemption of regular SPI transfers.
- */
- spi_flush_queue(ctlr);
-
- if (ctlr->auto_runtime_pm) {
- ret = pm_runtime_get_sync(ctlr->dev.parent);
- if (ret < 0) {
- dev_err(&ctlr->dev,
- "Failed to power device: %d\n",
- ret);
- return ret;
- }
- }
+ ret = spi_mem_access_start(mem);
+ if (ret)
+ return ret;

- mutex_lock(&ctlr->bus_lock_mutex);
- mutex_lock(&ctlr->io_mutex);
ret = ctlr->mem_ops->exec_op(mem, op);
- mutex_unlock(&ctlr->io_mutex);
- mutex_unlock(&ctlr->bus_lock_mutex);

- if (ctlr->auto_runtime_pm)
- pm_runtime_put(ctlr->dev.parent);
+ spi_mem_access_end(mem);

/*
* Some controllers only optimize specific paths (typically the
--
2.17.1


[PATCH v3 4.19.y-cip 08/17] spi: spi-mem: export spi_mem_default_supports_op()

Lad Prabhakar
 

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>

commit 46109648052fe778c75f199d72255c899578d6f7 upstream.

Export spi_mem_default_supports_op(), so that controller drivers
can use this.
spi-mem driver already exports this using EXPORT_SYMBOL,
but not declared it in spi-mem.h.
This patch declares spi_mem_default_supports_op() in spi-mem.h and
also removes the static from the function prototype.

This patch also squashes upstream commit 72e6841608b9 ("spi: spi-mem: Fix
build error without CONFIG_SPI_MEM")' in the current patch as commit
46109648052f ("spi: spi-mem: export spi_mem_default_supports_op()")'
introduced below build error when built without CONFIG_SPI_MEM:

drivers/spi/spi-zynq-qspi.o: In function `zynq_qspi_supports_op':
spi-zynq-qspi.c:(.text+0x1da): undefined reference to `spi_mem_default_supports_op'

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[PL: manually applied the changes, squashed commit 72e6841608b9
("spi: spi-mem: Fix build error without CONFIG_SPI_MEM")' in current patch]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 4 ++--
include/linux/spi/spi-mem.h | 11 +++++++++++
2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 967f581bca4f..b319a9f0138c 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -128,8 +128,8 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
return -ENOTSUPP;
}

-static bool spi_mem_default_supports_op(struct spi_mem *mem,
- const struct spi_mem_op *op)
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
{
if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
return false;
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 80db2de83402..253a8d451d4c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -224,6 +224,10 @@ int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
const struct spi_mem_op *op,
struct sg_table *sg);
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op);
+
#else
static inline int
spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
@@ -239,6 +243,13 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
struct sg_table *sg)
{
}
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ return false;
+}
+
#endif /* CONFIG_SPI_MEM */

int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
--
2.17.1


[PATCH v3 4.19.y-cip 07/17] spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum

Lad Prabhakar
 

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit 0ebb261a0b2d090de618a383d2378d4a00834958 upstream.

When defining spi_mem_op templates we don't necessarily know the size
that will be passed when the template is actually used, and basing the
supports_op() check on op->data.nbytes to know whether there will be
data transferred for a specific operation is this not possible.

Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum so that we can base
our checks on op->data.dir instead of op->data.nbytes.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[PL: manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/spi/spi-mem.c | 2 +-
include/linux/spi/spi-mem.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 62a7b80801d2..967f581bca4f 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -142,7 +142,7 @@ static bool spi_mem_default_supports_op(struct spi_mem *mem,
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;

- if (op->data.nbytes &&
+ if (op->data.dir != SPI_MEM_NO_DATA &&
spi_check_buswidth_req(mem, op->data.buswidth,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 69ee30456864..80db2de83402 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -57,10 +57,12 @@
/**
* enum spi_mem_data_dir - describes the direction of a SPI memory data
* transfer from the controller perspective
+ * @SPI_MEM_NO_DATA: no data transferred
* @SPI_MEM_DATA_IN: data coming from the SPI memory
* @SPI_MEM_DATA_OUT: data sent the SPI memory
*/
enum spi_mem_data_dir {
+ SPI_MEM_NO_DATA,
SPI_MEM_DATA_IN,
SPI_MEM_DATA_OUT,
};
--
2.17.1


[PATCH v3 4.19.y-cip 06/17] memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inline

Lad Prabhakar
 

commit 7889a7da59e0131ac60b858c73a3604ef88b1d96 upstream.

Define rpcif_enable_rpm() and rpcif_disable_rpm() as static
inline in the header instead of exporting them.

Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20201126191146.8753-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/memory/renesas-rpc-if.c | 13 -------------
include/memory/renesas-rpc-if.h | 13 +++++++++++--
2 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 1e7b937b739a..5f650eb3e9e7 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>

@@ -206,18 +205,6 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
}
EXPORT_SYMBOL(rpcif_sw_init);

-void rpcif_enable_rpm(struct rpcif *rpc)
-{
- pm_runtime_enable(rpc->dev);
-}
-EXPORT_SYMBOL(rpcif_enable_rpm);
-
-void rpcif_disable_rpm(struct rpcif *rpc)
-{
- pm_runtime_disable(rpc->dev);
-}
-EXPORT_SYMBOL(rpcif_disable_rpm);
-
void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
{
u32 dummy;
diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
index 9ad136682c47..14cfd036268a 100644
--- a/include/memory/renesas-rpc-if.h
+++ b/include/memory/renesas-rpc-if.h
@@ -10,6 +10,7 @@
#ifndef __RENESAS_RPC_IF_H
#define __RENESAS_RPC_IF_H

+#include <linux/pm_runtime.h>
#include <linux/types.h>

enum rpcif_data_dir {
@@ -77,11 +78,19 @@ struct rpcif {

int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
void rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
-void rpcif_enable_rpm(struct rpcif *rpc);
-void rpcif_disable_rpm(struct rpcif *rpc);
void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
size_t *len);
int rpcif_manual_xfer(struct rpcif *rpc);
ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf);

+static inline void rpcif_enable_rpm(struct rpcif *rpc)
+{
+ pm_runtime_enable(rpc->dev);
+}
+
+static inline void rpcif_disable_rpm(struct rpcif *rpc)
+{
+ pm_runtime_disable(rpc->dev);
+}
+
#endif // __RENESAS_RPC_IF_H
--
2.17.1


[PATCH v3 4.19.y-cip 05/17] memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe()

Lad Prabhakar
 

commit 4e6b86b409f9fc63fedb39d6e3a0202c4b0244ce upstream.

Release the node reference by calling of_node_put(flash) in the probe.

Fixes: ca7d8b980b67f ("memory: add Renesas RPC-IF driver")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126191146.8753-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/memory/renesas-rpc-if.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 0d2b0e1c1ba4..1e7b937b739a 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -563,9 +563,11 @@ static int rpcif_probe(struct platform_device *pdev)
} else if (of_device_is_compatible(flash, "cfi-flash")) {
name = "rpc-if-hyperflash";
} else {
+ of_node_put(flash);
dev_warn(&pdev->dev, "unknown flash type\n");
return -ENODEV;
}
+ of_node_put(flash);

vdev = platform_device_alloc(name, pdev->id);
if (!vdev)
--
2.17.1


[PATCH v3 4.19.y-cip 04/17] memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm

Lad Prabhakar
 

commit 61a6d854b9555b420fbfae62ef26baa8b9493b32 upstream.

rpcif_enable_rpm calls pm_runtime_enable, so rpcif_disable_rpm needs to
call pm_runtime_disable and not pm_runtime_put_sync.

Fixes: ca7d8b980b67f ("memory: add Renesas RPC-IF driver")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126191146.8753-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/memory/renesas-rpc-if.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index d58b80d9e605..0d2b0e1c1ba4 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -214,7 +214,7 @@ EXPORT_SYMBOL(rpcif_enable_rpm);

void rpcif_disable_rpm(struct rpcif *rpc)
{
- pm_runtime_put_sync(rpc->dev);
+ pm_runtime_disable(rpc->dev);
}
EXPORT_SYMBOL(rpcif_disable_rpm);

--
2.17.1


[PATCH v3 4.19.y-cip 03/17] memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer()

Lad Prabhakar
 

commit a0453f4ed066cae651b3119ed11f52d31dae1eca upstream.

In the error path of rpcif_manual_xfer() the value of ret is overwritten
by value returned by reset_control_reset() function and thus returning
incorrect value to the caller.

This patch makes sure the correct value is returned to the caller of
rpcif_manual_xfer() by dropping the overwrite of ret in error path.
Also now we ignore the value returned by reset_control_reset() in the
error path and instead print a error message when it fails.

Fixes: ca7d8b980b67f ("memory: add Renesas RPC-IF driver")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126191146.8753-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/memory/renesas-rpc-if.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 88f51ec8f1d1..d58b80d9e605 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -510,7 +510,8 @@ int rpcif_manual_xfer(struct rpcif *rpc)
return ret;

err_out:
- ret = reset_control_reset(rpc->rstc);
+ if (reset_control_reset(rpc->rstc))
+ dev_err(rpc->dev, "Failed to reset HW\n");
rpcif_hw_init(rpc, rpc->bus_size == 2);
goto exit;
}
--
2.17.1

1441 - 1460 of 7462