[PATCH 4.4.y-cip 0/2] Add dts for Moxa UC-8100-ME-T platform


johnsonch.chen@moxa.com
 

Hello all,

MOXA UC-8100-ME-T is built around a Cortex-A8 processor for TI AM335x,
and it's designed for embedded data acquisition application. Here we add
the device tree am335x-moxa-uc-8100-me-t.dts. Besides, also add new DT
binding for the eDMA3 because function of edma crossbar is used in
UC-8100-ME-T, and memory is safe for with the new binding.

1. Use the new binding for eDMA3 of am33xx.
2. Add dts for MOXA UC-8100-ME-T

It's tested with a MOXA UC-8100-ME-T platform.

thanks!
Johnson

Peter Ujfalusi (1):
ARM: DTS: am33xx: Use the new DT bindings for the eDMA3

SZ Lin (1):
ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform

.../devicetree/bindings/arm/omap/omap.txt | 3 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-evm.dts | 9 +-
arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 525 +++++++++++++++++++++
arch/arm/boot/dts/am335x-pepper.dts | 11 +-
arch/arm/boot/dts/am33xx.dtsi | 94 ++--
7 files changed, 601 insertions(+), 43 deletions(-)
create mode 100644 arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

--
2.11.0


Pavel Machek
 

Hi!

MOXA UC-8100-ME-T is built around a Cortex-A8 processor for TI AM335x,
and it's designed for embedded data acquisition application. Here we add
the device tree am335x-moxa-uc-8100-me-t.dts. Besides, also add new DT
binding for the eDMA3 because function of edma crossbar is used in
UC-8100-ME-T, and memory is safe for with the new binding.

1. Use the new binding for eDMA3 of am33xx.
2. Add dts for MOXA UC-8100-ME-T

It's tested with a MOXA UC-8100-ME-T platform.
So this is relatively simple, as it only affects Moxa code. And I see
nothing wrong there.

I'll apply it if there are no other comments.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Nobuhiro Iwamatsu
 

Hi,

-----Original Message-----
From: Pavel Machek [mailto:pavel@denx.de]
Sent: Friday, June 5, 2020 7:41 PM
To: Johnson CH Chen (陳昭勳) <JohnsonCH.Chen@moxa.com>
Cc: iwamatsu nobuhiro(岩松 信洋 □SWC◯ACT) <nobuhiro1.iwamatsu@toshiba.co.jp>; pavel@denx.de;
cip-dev@lists.cip-project.org
Subject: Re: [cip-dev][PATCH 4.4.y-cip 0/2] Add dts for Moxa UC-8100-ME-T platform

Hi!

MOXA UC-8100-ME-T is built around a Cortex-A8 processor for TI AM335x,
and it's designed for embedded data acquisition application. Here we add
the device tree am335x-moxa-uc-8100-me-t.dts. Besides, also add new DT
binding for the eDMA3 because function of edma crossbar is used in
UC-8100-ME-T, and memory is safe for with the new binding.

1. Use the new binding for eDMA3 of am33xx.
2. Add dts for MOXA UC-8100-ME-T

It's tested with a MOXA UC-8100-ME-T platform.
So this is relatively simple, as it only affects Moxa code. And I see
nothing wrong there.

I'll apply it if there are no other comments.
I reviewed this patch, there was no wrong.

Best regards,
Nobuhiro