[PATCH 3/3] README: Add steps to build cip-security image


Venkata Pyla
 

From: venkata <venkata.pyla@...>

Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/README.md b/README.md
index bbad1a0..b2c4166 100644
--- a/README.md
+++ b/README.md
@@ -36,6 +36,16 @@ card, run
dd if=build/tmp/deploy/images/bbb/cip-core-image-cip-core-buster-bbb.wic.img \
of=/dev/<medium-device> bs=1M status=progress

+## Building Security target images
+Building images for QEMU x86-64bit machine
+
+ ./kas-docker --isar build --target cip-core-image-security kas.yml:board-qemu-amd64.yml
+
+Run the generated securiy images on QEMU (x86-64bit)
+
+ TARGET_IMAGE=cip-core-image-security ./start-qemu.sh amd64
+
+
## Community Resources

TBD
--
2.27.0.windows.1

The information contained in this e-mail message and in any
attachments/annexure/appendices is confidential to the
recipient and may contain privileged information.
If you are not the intended recipient, please notify the
sender and delete the message along with any
attachments/annexure/appendices. You should not disclose,
copy or otherwise use the information contained in the
message or any annexure. Any views expressed in this e-mail
are those of the individual sender except where the sender
specifically states them to be the views of
Toshiba Software India Pvt. Ltd. (TSIP),Bangalore.

Although this transmission and any attachments are believed to be
free of any virus or other defect that might affect any computer
system into which it is received and opened, it is the responsibility
of the recipient to ensure that it is virus free and no responsibility
is accepted by Toshiba Embedded Software India Pvt. Ltd, for any loss or
damage arising in any way from its use.


Jan Kiszka
 

On 21.07.20 10:16, Venkata Pyla wrote:
From: venkata <venkata.pyla@...>
Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/README.md b/README.md
index bbad1a0..b2c4166 100644
--- a/README.md
+++ b/README.md
@@ -36,6 +36,16 @@ card, run
dd if=build/tmp/deploy/images/bbb/cip-core-image-cip-core-buster-bbb.wic.img \
of=/dev/<medium-device> bs=1M status=progress
+## Building Security target images
+Building images for QEMU x86-64bit machine
+
+ ./kas-docker --isar build --target cip-core-image-security kas.yml:board-qemu-amd64.yml
+
+Run the generated securiy images on QEMU (x86-64bit)
+
+ TARGET_IMAGE=cip-core-image-security ./start-qemu.sh amd64
+
+
## Community Resources
TBD
This patch is fine, but I'm missing 4/4: Add this image to CI (same comment as I had on the MR on gitlab).

Jan

--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux


Venkata Pyla
 

Hi Jan,

On Thu, Jul 23, 2020 at 04:10 PM, Jan Kiszka wrote:


On 21.07.20 10:16, Venkata Pyla wrote:
From: venkata <venkata.pyla@...>

Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/README.md b/README.md
index bbad1a0..b2c4166 100644
--- a/README.md
+++ b/README.md
@@ -36,6 +36,16 @@ card, run
dd
if=build/tmp/deploy/images/bbb/cip-core-image-cip-core-buster-bbb.wic.img \
of=/dev/<medium-device> bs=1M status=progress

+## Building Security target images
+Building images for QEMU x86-64bit machine
+
+ ./kas-docker --isar build --target cip-core-image-security
kas.yml:board-qemu-amd64.yml
+
+Run the generated securiy images on QEMU (x86-64bit)
+
+ TARGET_IMAGE=cip-core-image-security ./start-qemu.sh amd64
+
+
## Community Resources

TBD
This patch is fine, but I'm missing 4/4: Add this image to CI (same
comment as I had on the MR on gitlab).
Adding cip security image to CI,
i need some suggestions to use the current format present in .gitlab-ci.yml

Currently i have the below problem for using script deploy-cip-core.sh:
1. image name formation in the script should have another variable
.../$IMG_PREFIX-cip-core-$RELEASE-$TARGET
where $IMG_PREFIX is default to "cip-core-image" if not specified
for security image it will be passed as 4th argument "cip-core-image-security"
2. currently scrit is expecting the image format in *.wic.img so,
for qemu i think we should have wks file to generate image with format .wic.img

or for this security image do we need to deploy it seperatley?
please guide me

Thanks

Jan

--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux


Daniel Sangorrin <daniel.sangorrin@...>
 

Hi Venkata-san

Maybe Jan didn't see your e-mail because he wasn't in the CC.

-----Original Message-----
From: cip-dev@... <cip-dev@...> On Behalf Of Venkata Pyla
Sent: Friday, July 24, 2020 3:58 PM
To: cip-dev@...
Subject: Re: [cip-dev] [PATCH 3/3] README: Add steps to build cip-security image

Hi Jan,

On Thu, Jul 23, 2020 at 04:10 PM, Jan Kiszka wrote:


On 21.07.20 10:16, Venkata Pyla wrote:
From: venkata <venkata.pyla@...>

Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/README.md b/README.md
index bbad1a0..b2c4166 100644
--- a/README.md
+++ b/README.md
@@ -36,6 +36,16 @@ card, run
dd
if=build/tmp/deploy/images/bbb/cip-core-image-cip-core-buster-bbb.wic.
img \
of=/dev/<medium-device> bs=1M status=progress

+## Building Security target images
+Building images for QEMU x86-64bit machine
+
+ ./kas-docker --isar build --target cip-core-image-security
kas.yml:board-qemu-amd64.yml
+
+Run the generated securiy images on QEMU (x86-64bit)
+
+ TARGET_IMAGE=cip-core-image-security ./start-qemu.sh amd64
+
+
## Community Resources

TBD
This patch is fine, but I'm missing 4/4: Add this image to CI (same
comment as I had on the MR on gitlab).
Adding cip security image to CI,
i need some suggestions to use the current format present in .gitlab-ci.yml

Currently i have the below problem for using script deploy-cip-core.sh:
1. image name formation in the script should have another variable
.../$IMG_PREFIX-cip-core-$RELEASE-$TARGET
where $IMG_PREFIX is default to "cip-core-image" if not specified
for security image it will be passed as 4th argument "cip-core-image-security"
2. currently scrit is expecting the image format in *.wic.img so,
for qemu i think we should have wks file to generate image with format .wic.img

or for this security image do we need to deploy it seperatley?
please guide me
Sometimes it is better to send a patch instead of trying to explain it with words.

Thanks,
Daniel


Jan Kiszka
 

On 30.07.20 02:07, daniel.sangorrin@... wrote:
Hi Venkata-san
Maybe Jan didn't see your e-mail because he wasn't in the CC.

-----Original Message-----
From: cip-dev@... <cip-dev@...> On Behalf Of Venkata Pyla
Sent: Friday, July 24, 2020 3:58 PM
To: cip-dev@...
Subject: Re: [cip-dev] [PATCH 3/3] README: Add steps to build cip-security image

Hi Jan,

On Thu, Jul 23, 2020 at 04:10 PM, Jan Kiszka wrote:


On 21.07.20 10:16, Venkata Pyla wrote:
From: venkata <venkata.pyla@...>

Signed-off-by: venkata <venkata.pyla@...>
---
README.md | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/README.md b/README.md
index bbad1a0..b2c4166 100644
--- a/README.md
+++ b/README.md
@@ -36,6 +36,16 @@ card, run
dd
if=build/tmp/deploy/images/bbb/cip-core-image-cip-core-buster-bbb.wic.
img \
of=/dev/<medium-device> bs=1M status=progress

+## Building Security target images
+Building images for QEMU x86-64bit machine
+
+ ./kas-docker --isar build --target cip-core-image-security
kas.yml:board-qemu-amd64.yml
+
+Run the generated securiy images on QEMU (x86-64bit)
+
+ TARGET_IMAGE=cip-core-image-security ./start-qemu.sh amd64
+
+
## Community Resources

TBD
This patch is fine, but I'm missing 4/4: Add this image to CI (same
comment as I had on the MR on gitlab).
Adding cip security image to CI,
i need some suggestions to use the current format present in .gitlab-ci.yml

Currently i have the below problem for using script deploy-cip-core.sh:
1. image name formation in the script should have another variable
.../$IMG_PREFIX-cip-core-$RELEASE-$TARGET
where $IMG_PREFIX is default to "cip-core-image" if not specified
for security image it will be passed as 4th argument "cip-core-image-security"
2. currently scrit is expecting the image format in *.wic.img so,
for qemu i think we should have wks file to generate image with format .wic.img

or for this security image do we need to deploy it seperatley?
please guide me
Sometimes it is better to send a patch instead of trying to explain it with words.
I've replied on the deployment question already.

If there is a need for the security artifacts already, we need to enhance the deployment for that particular use case - but I doubt there is at this point, otherwise the series had carried CI in the first place.

Jan

--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux