[PATCH 4.19.y-cip 0/4] Add SATA support to RZ/G2N


Lad Prabhakar
 

Hi All,

This patch series adds SATA support to RZ/G2N SoC and enables
sata node in Hihope RZ/G2N board, alongside a fix to sata driver.

Cheers,
Prabhakar

Fabrizio Castro (2):
dt-bindings: ata: sata_rcar: Add r8a774b1 support
arm64: dts: renesas: r8a774b1: Add SATA controller node

Geert Uytterhoeven (1):
ata: sata_rcar: Fix DMA boundary mask

Lad Prabhakar (1):
arm64: dts: renesas: r8a774b1-hihope-rzg2n-ex: Enable sata

Documentation/devicetree/bindings/ata/sata_rcar.txt | 7 +++++--
.../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 5 +++++
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 11 +++++++++++
drivers/ata/sata_rcar.c | 2 +-
4 files changed, 22 insertions(+), 3 deletions(-)

--
2.17.1


Lad Prabhakar
 

Hi,

-----Original Message-----
From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On Behalf Of Lad Prabhakar via lists.cip-project.org
Sent: 29 October 2020 11:46
To: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [cip-dev] [PATCH 4.19.y-cip 0/4] Add SATA support to RZ/G2N

Hi All,

This patch series adds SATA support to RZ/G2N SoC and enables
sata node in Hihope RZ/G2N board, alongside a fix to sata driver.
Missed to mention all the patches have been cherry picked from v5.10-rc1.

Cheers,
Prabhakar


Fabrizio Castro (2):
dt-bindings: ata: sata_rcar: Add r8a774b1 support
arm64: dts: renesas: r8a774b1: Add SATA controller node

Geert Uytterhoeven (1):
ata: sata_rcar: Fix DMA boundary mask

Lad Prabhakar (1):
arm64: dts: renesas: r8a774b1-hihope-rzg2n-ex: Enable sata

Documentation/devicetree/bindings/ata/sata_rcar.txt | 7 +++++--
.../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 5 +++++
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 11 +++++++++++
drivers/ata/sata_rcar.c | 2 +-
4 files changed, 22 insertions(+), 3 deletions(-)

--
2.17.1


Pavel Machek
 

Hi!

This patch series adds SATA support to RZ/G2N SoC and enables
sata node in Hihope RZ/G2N board, alongside a fix to sata driver.
Series looks okay to me, it is currently being tested. I can
apply/push it if there are no other comments.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Pavel Machek
 

Hi!

This patch series adds SATA support to RZ/G2N SoC and enables
sata node in Hihope RZ/G2N board, alongside a fix to sata driver.
Series looks okay to me, it is currently being tested. I can
apply/push it if there are no other comments.
Thanks for patches, I pushed out the series.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Lad Prabhakar
 

Hi Pavel,

-----Original Message-----
From: Pavel Machek <pavel@denx.de>
Sent: 30 October 2020 10:26
To: Pavel Machek <pavel@denx.de>
Cc: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>; cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp>; Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH 4.19.y-cip 0/4] Add SATA support to RZ/G2N

Hi!

This patch series adds SATA support to RZ/G2N SoC and enables
sata node in Hihope RZ/G2N board, alongside a fix to sata driver.
Series looks okay to me, it is currently being tested. I can
apply/push it if there are no other comments.
Thanks for patches, I pushed out the series.
Thank you.

Cheers,
Prabhakar