[PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support


Lad Prabhakar
 

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.

Cheers,
Prabhakar

Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Pavel Machek
 

Hi!

I had some minor comments, but the series looks good; I guess we don't
need to delay applying.

Some of the patches are not in 5.10, so we'll need them in cip 5.10
branch, too?

Let me do some testing.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Pavel Machek
 

Hi!

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
Well... test are okay, except that Renesas lab is offline so it was
not really tested on Renesas targets.

Anyway, I guess I'm okay with applying these if there are no other
comments.

Best regards,
Pavel

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Nobuhiro Iwamatsu
 

Hi,

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-lad.rj@bp.renesas.com]
Sent: Wednesday, March 10, 2021 1:36 AM
To: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 □SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
I reviewed this series, I didn't see any major problems.
As Paval points out, the Renesas lab is now stopped.
If this recovers and the target hardware test is okay, I would apply this.
Cheers,
Prabhakar
Best regards,
Nobuhiro



Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Lad Prabhakar
 

Hi Pavel, Nobuhiro,

-----Original Message-----
From: nobuhiro1.iwamatsu@toshiba.co.jp <nobuhiro1.iwamatsu@toshiba.co.jp>
Sent: 10 March 2021 08:08
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>; cip-dev@lists.cip-project.org;
pavel@denx.de
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: RE: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support

Hi,

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-lad.rj@bp.renesas.com]
Sent: Wednesday, March 10, 2021 1:36 AM
To: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 □SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
I reviewed this series, I didn't see any major problems.
Thank you for the review.

As Paval points out, the Renesas lab is now stopped.
If this recovers and the target hardware test is okay, I would apply this.
I have informed Chris about this.

Cheers,
Prabhakar

Cheers,
Prabhakar
Best regards,
Nobuhiro



Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Chris Paterson
 

Hello Pavel, Iwamatsu-san,

From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On
Behalf Of Nobuhiro Iwamatsu via lists.cip-project.org
Sent: 10 March 2021 08:08

Hi,

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-lad.rj@bp.renesas.com]
Sent: Wednesday, March 10, 2021 1:36 AM
To: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋
□SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2
support

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
I reviewed this series, I didn't see any major problems.
As Paval points out, the Renesas lab is now stopped.
If this recovers and the target hardware test is okay, I would apply this.
Sorry about the lab-cip-renesas issues. The lab will probably be offline until next week.
I'm happy for this series to be delayed until it's tested if that's what you'd prefer.

Kind regards, Chris

Cheers,
Prabhakar
Best regards,
Nobuhiro



Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644
Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-
adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-
aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-
rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-
rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-
2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-
rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Chris Paterson
 

Hello Pavel, Iwamatsu-san,

From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On
Behalf Of Chris Paterson via lists.cip-project.org
Sent: 10 March 2021 10:59

Hello Pavel, Iwamatsu-san,

From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On
Behalf Of Nobuhiro Iwamatsu via lists.cip-project.org
Sent: 10 March 2021 08:08

Hi,

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-
lad.rj@bp.renesas.com]
Sent: Wednesday, March 10, 2021 1:36 AM
To: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋
□SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2
support

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
I reviewed this series, I didn't see any major problems.
As Paval points out, the Renesas lab is now stopped.
If this recovers and the target hardware test is okay, I would apply this.
Sorry about the lab-cip-renesas issues. The lab will probably be offline until
next week.
I'm happy for this series to be delayed until it's tested if that's what you'd
prefer.
The Renesas boards are available for testing again now :)

Let me know if there is any further input required for this series.

Thanks, Chris


Kind regards, Chris

Cheers,
Prabhakar
Best regards,
Nobuhiro



Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8
format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode
match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644
Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-
adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-
aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-
rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-
rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-
mipi-
2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-
rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Nobuhiro Iwamatsu
 

Hi Chris,

-----Original Message-----
From: Chris Paterson [mailto:Chris.Paterson2@renesas.com]
Sent: Tuesday, March 23, 2021 7:11 AM
To: cip-dev@lists.cip-project.org; pavel@denx.de; iwamatsu nobuhiro(岩松 信洋 □SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Biju Das <biju.das.jz@bp.renesas.com>; Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: RE: [cip-dev] [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support

Hello Pavel, Iwamatsu-san,

From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On
Behalf Of Chris Paterson via lists.cip-project.org
Sent: 10 March 2021 10:59

Hello Pavel, Iwamatsu-san,

From: cip-dev@lists.cip-project.org <cip-dev@lists.cip-project.org> On
Behalf Of Nobuhiro Iwamatsu via lists.cip-project.org
Sent: 10 March 2021 08:08

Hi,

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-
lad.rj@bp.renesas.com]
Sent: Wednesday, March 10, 2021 1:36 AM
To: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋
□SWC◯ACT)
<nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2
support

Hi All,

This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
I reviewed this series, I didn't see any major problems.
As Paval points out, the Renesas lab is now stopped.
If this recovers and the target hardware test is okay, I would apply this.
Sorry about the lab-cip-renesas issues. The lab will probably be offline until
next week.
I'm happy for this series to be delayed until it's tested if that's what you'd
prefer.
The Renesas boards are available for testing again now :)

Let me know if there is any further input required for this series.
I just pushed to git.kernel.org.

Best regards,
Nobuhiro


Thanks, Chris


Kind regards, Chris

Cheers,
Prabhakar
Best regards,
Nobuhiro



Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size

Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor

Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()

Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection

Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8
format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N

Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode
match

Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure

Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab

.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644
Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-
adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-
aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-
rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-
rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-
mipi-
2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-
rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c

--
2.17.1


Chris Paterson
 

From: nobuhiro1.iwamatsu@toshiba.co.jp
<nobuhiro1.iwamatsu@toshiba.co.jp>
Sent: 23 March 2021 07:32
Sorry about the lab-cip-renesas issues. The lab will probably be offline
until
next week.
I'm happy for this series to be delayed until it's tested if that's what you'd
prefer.
The Renesas boards are available for testing again now :)

Let me know if there is any further input required for this series.
I just pushed to git.kernel.org.
Thank you!

Kind regards, Chris