[PATCH 5.10.y-cip 00/25] Add more support to RZ/G2UL SMARC EVK


Pavel Machek
 

Hi!

This patch series aims to add CANFD, WDT, USB2.0, AUDIO, Serial NOR Flash,
OSTM, ADC and RSPI on SMARC EVK based on RZ/G2UL SoC.

All these patches are cherry-picked from the mainline.
Thank you, applied.

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Pavel Machek
 

Hi!

This patch series aims to add CANFD, WDT, USB2.0, AUDIO, Serial NOR Flash,
OSTM, ADC and RSPI on SMARC EVK based on RZ/G2UL SoC.
Series looks okay to me. If there are no other comments and it passes
testing, I can apply it.

Best regards,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.


Biju Das
 

This patch series aims to add CANFD, WDT, USB2.0, AUDIO, Serial NOR Flash,
OSTM, ADC and RSPI on SMARC EVK based on RZ/G2UL SoC.

All these patches are cherry-picked from the mainline.

Biju Das (25):
clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O
Bus Controller
clk: renesas: r9a07g043: Add RSPI clock and reset entries
clk: renesas: r9a07g043: Add TSU clock and reset entry
clk: renesas: r9a07g043: Add clock and reset entries for ADC
arm64: dts: renesas: r9a07g043: Add I2C2 node and fillup the
I2C{0,1,3} stub nodes
arm64: dts: renesas: r9a07g043: Add SSI{1,2,3} nodes and fillup the
SSI0 stub node
arm64: dts: renesas: r9a07g043: Add USB2.0 support
arm64: dts: renesas: r9a07g043: Fillup the CANFD stub node
arm64: dts: renesas: r9a07g043: Fillup the OSTM{0,1,2} stub nodes
arm64: dts: renesas: r9a07g043: Fillup the WDT{0,2} stub nodes
arm64: dts: renesas: rzg2ul-smarc: Enable i2c{0,1} and wm8978
arm64: dts: renesas: rzg2ul-smarc: Enable CANFD
arm64: dts: renesas: rzg2ul-smarc-som: Enable OSTM
arm64: dts: renesas: rzg2ul-smarc-som: Enable watchdog
arm64: dts: renesas: rzg2l-smarc: Move ssi0 and cpu sound_dai nodes
from common dtsi
arm64: dts: renesas: rzg2ul-smarc: Enable Audio
arm64: dts: renesas: rzg2ul-smarc: Enable USB2.0 support
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Add ADC node
arm64: dts: renesas: rzg2ul-smarc: Enable RSPI1 on carrier board
arm64: dts: renesas: rzg2ul-smarc-som: Enable ADC on SMARC platform

arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 465 +++++++++++++++++-
.../boot/dts/renesas/r9a07g043u11-smarc.dts | 82 ---
.../boot/dts/renesas/rz-smarc-common.dtsi | 8 -
arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 11 +
arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 11 +
.../dts/renesas/rzg2ul-smarc-pinfunction.dtsi | 56 +++
.../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 37 ++
arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi | 45 ++
drivers/clk/renesas/r9a07g043-cpg.c | 39 ++
9 files changed, 643 insertions(+), 111 deletions(-)

--
2.25.1