[cip-dev] B at D run on Renesas board - issue

Daniel Sangorrin daniel.sangorrin at toshiba.co.jp
Mon Dec 11 06:46:59 UTC 2017


Hi Trung,

I haven't got any message from Agustin.
Could you build the binaries by yourself?

Regards,
Daniel

> -----Original Message-----
> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> Sent: Tuesday, December 05, 2017 6:09 PM
> To: Daniel Sangorrin; Agustin Benito Bethencourt
> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; cip-dev at lists.cip-project.org
> Subject: RE: [cip-dev] B at D run on Renesas board - issue
> 
> Dear Daniel,
> 
> Once they to become ready for download, please ping me, thank you!
> 
> Regards,
> Trung
> 
> -----Original Message-----
> From: cip-dev-bounces at lists.cip-project.org [mailto:cip-dev-bounces at lists.cip-project.org] On Behalf Of Agustin Benito Bethencourt
> Sent: Friday, December 1, 2017 2:42 AM
> To: Daniel Sangorrin <daniel.sangorrin at toshiba.co.jp>
> Cc: Binh Thanh. Nguyen <binh.nguyen.uw at rvc.renesas.com>; O365-Toru Oishi <toru.oishi.zj at renesas.com>; cip-dev at lists.cip-
> project.org
> Subject: Re: [cip-dev] B at D run on Renesas board - issue
> 
> Hi,
> 
> On 29/11/17 23:53, Daniel Sangorrin wrote:
> > Hi Trung, Agustin, Robert
> >
> >> -----Original Message-----
> >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >> Sent: Monday, November 27, 2017 7:45 PM
> >> To: Robert Marshall; Daniel Sangorrin
> >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson';
> >> cip-dev at lists.cip-project.org
> >> Subject: RE: B at D run on Renesas board - issue
> >>
> >> Dear Daniel, Robert,
> >>
> >> Thank for your advices.
> >> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test?
> >> I appreciate that.
> >
> > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet.
> > Agustin: could you try again please? should I send you some information?
> 
> I am travelling. Will do it Mon or Tue next week. Sorry about this delay. You should have full access to S3.
> 
> > Robert: should I send the patches again to make sure that everyone is running the same code?
> >
> > Best regards,
> > Daniel
> >
> >> -----Original Message-----
> >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
> >> Sent: Friday, November 17, 2017 4:18 PM
> >> To: Daniel Sangorrin <daniel.sangorrin at toshiba.co.jp>
> >> Cc: Trung. Huynh <trung.huynh.uw at rvc.renesas.com>; Binh Thanh. Nguyen
> >> <binh.nguyen.uw at rvc.renesas.com>; O365-Toru Oishi
> >> <toru.oishi.zj at renesas.com>; 'Chris Paterson'
> >> <Chris.Paterson2 at renesas.com>; cip-dev at lists.cip-project.org
> >> Subject: Re: B at D run on Renesas board - issue
> >>
> >> Hi
> >>
> >> "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp> writes:
> >>
> >>> Dear Trung san
> >>>
> >>>> -----Original Message-----
> >>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >>>> Sent: Thursday, November 16, 2017 5:49 PM
> >>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
> >>>> Cc: O365-Toru Oishi; 'Chris Paterson';
> >>>> cip-dev at lists.cip-project.org
> >>>> Subject: RE: B at D run on Renesas board - issue
> >>>>
> >>>> Dear Daniel,
> >>>>
> >>>> Thank for your reply.
> >>>> The log in attachment is took from lava for easily observing instead of html page.
> >>>> Regarding deploy section, YES, as you can see the log showing that
> >>>> has passed over it already to get into test section.
> >>>>
> >>>> Is there anything going wrong?
> >>>> Looking for your feedback
> >>>>
> >>>
> >>> It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card.
> >>>
> >>
> >> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section:
> >>
> >>      commands: sd
> >>
> >> you should change that to
> >>
> >>      commands: ramdisk
> >>
> >> Robert
> >>
> >>> Regards,
> >>> Daniel
> >>>
> >>>> Best Regards,
> >>>> Trung
> >>>>
> >>>> -----Original Message-----
> >>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
> >>>> Sent: Thursday, November 16, 2017 3:11 PM
> >>>> To: Trung. Huynh <trung.huynh.uw at rvc.renesas.com>; 'Robert Marshall'
> >>>> <robert.marshall at codethink.co.uk>; Binh Thanh. Nguyen
> >>>> <binh.nguyen.uw at rvc.renesas.com>
> >>>> Cc: O365-Toru Oishi <toru.oishi.zj at renesas.com>; 'Chris Paterson'
> >>>> <Chris.Paterson2 at renesas.com>; cip-dev at lists.cip-project.org
> >>>> Subject: RE: B at D run on Renesas board - issue
> >>>>
> >>>> Dear Trung san,
> >>>>
> >>>>> -----Original Message-----
> >>>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com]
> >>>>> Sent: Wednesday, November 15, 2017 7:21 PM
> >>>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen
> >>>>> Cc: O365-Toru Oishi; 'Chris Paterson';
> >>>>> cip-dev at lists.cip-project.org
> >>>>> Subject: RE: B at D run on Renesas board - issue
> >>>>>
> >>>>> Hi Daniel, Robert,
> >>>>>
> >>>>> We got into test section already, but have no idea why it attempts to execute the thing non-exist at all:
> >>>>> # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our
> >>>>> error log in attachment.
> >>>>> I also take example log over here
> >>>>> https://gitlab.com/snippets/1679749
> >>>>> to see that it can create a directory by mkdir /lava-1
> >>>>>
> >>>>> Could you please tell us what does it make scene? How can we fix it?
> >>>>> Thank you.
> >>>>
> >>>> Please could you send the complete log?
> >>>>
> >>>>> P/S: healthcheck script same as Binh-san attached to you before
> >>>>
> >>>> Did you make sure to uncomment the deploy section?
> >>>>
> >>>> Regards,
> >>>> Daniel
> >>>>
> >>>>>
> >>>>> Best Regards,
> >>>>> Trung
> >>>>>
> >>>>> -----Original Message-----
> >>>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp]
> >>>>> Sent: Monday, November 6, 2017 9:19 AM
> >>>>> To: 'Robert Marshall' <robert.marshall at codethink.co.uk>; Binh Thanh.
> >>>>> Nguyen <binh.nguyen.uw at rvc.renesas.com>
> >>>>> Cc: O365-Toru Oishi <toru.oishi.zj at renesas.com>; 'Chris Paterson'
> >>>>> <Chris.Paterson2 at renesas.com>; Trung. Huynh
> >>>>> <trung.huynh.uw at rvc.renesas.com>; cip-dev at lists.cip-project.org
> >>>>> Subject: RE: B at D run on Renesas board - issue
> >>>>>
> >>>>> Hello Binh-san,
> >>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk]
> >>>>>> Sent: Saturday, November 04, 2017 1:05 AM
> >>>>>> To: Binh Thanh. Nguyen
> >>>>>> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung.
> >>>>>> Huynh; cip-dev at lists.cip-project.org
> >>>>>> Subject: Re: B at D run on Renesas board - issue
> >>>>>>
> >>>>>> "Binh Thanh. Nguyen" <binh.nguyen.uw at rvc.renesas.com> writes:
> >>>>>>
> >>>>>>> Hello Daniel, Robert,
> >>>>>>>
> >>>>>>> We are facing an issue when trying to run healthcheck using B at D on Renesas board.
> >>>>>>> I would like to attach the log and the healthcheck script (we
> >>>>>>> modified the healthcheck from Daniel)
> >>>>>>>
> >>>>>>> The boot action was passed, but after that, look like LAVA
> >>>>>>> cannot send command to Board, only send "#" (it supposed to be "uname").
> >>>>>>> I wonder if you met same issue before?
> >>>>>>> And if possible, please give us any hints you may have for debugging this issue!
> >>>>>>>
> >>>>>>> Best regards,
> >>>>>>> Binh Nguyen
> >>>>>>
> >>>>>> Thanh
> >>>>>>
> >>>>>> Sorry for the delay in responding!
> >>>>>>
> >>>>>> That test is missing a deploy section (all commented out) are you
> >>>>>> trying to make the test too minimal? LAVA tends to swallow output
> >>>>>> if it is what is expected.
> >>>>>>
> >>>>>> Robert
> >>>>>
> >>>>> As Robert said, please do not comment out the deploy section. LAVA
> >>>>> does not just deploy the binaries as they are, it also copies some
> >>>>> scripts (LAVA Test shell) into the ramdisk (or network filesystem).
> >>>>> # LAVA does not use scp (or a serial protocol) to copy them into
> >>>>> the target
> >>>>>
> >>>>> For deploying you need a PDU (remote power switch). If you don't
> >>>>> have one you need to buy one and then add the corresponding commands.
> >>>>> # Note: I use an IP Power 9258 remote PDU.
> >>>>> # Note: do not think you can get around without a PDU*
> >>>>>
> >>>>> Thanks,
> >>>>> Daniel
> >>>>>
> >>>>> *There are ways to do it but they have limitations
> >>>>> https://validation.linaro.org/static/docs/v2/dispatcher-design.htm
> >>>>> l
> >>>>> #pr
> >>>>> imary-
> >>>>> connection
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >
> >
> >
> >
> 
> 
> --
> Agustin Benito Bethencourt
> Principal Consultant - FOSS at Codethink agustin.benito at codethink.co.uk
> _______________________________________________
> cip-dev mailing list
> cip-dev at lists.cip-project.org
> https://lists.cip-project.org/mailman/listinfo/cip-dev





More information about the cip-dev mailing list